太阳活动对地球表面温度影响的研究进展

论述了近年来对地球表面温度变化特征、原因研究的意义及研究进展。许多研究表明，20世纪全球地表气温的变化是自然因素和人为因素共同作用的结果。根据多种反映太阳活动的代用指标拟合的气候模型指出，太阳活动可以解释1850年以前气温变化的大部分情况。工业革命以来，温室气体成为不可忽视的影响因素，太阳活动对气候影响所占的比重及其相互作用的物理机制仍然是有待深入研究和解决的问题。     

发动机典型寿命敏感件环境谱加速技术研究现状

对发动机寿命敏感件环境谱加速技术的研究现状进行分析。从加速环境谱的编制原则、编制方法以及当量关系的确定和验证等方面,详细介绍了加速环境谱的概念内涵。发动机的使用寿命主要受金属敏感件的腐蚀和非金属敏感件的老化制约,重点从常规加速腐蚀试验、多因素综合腐蚀试验和高温加速腐蚀试验等3个方面阐述了加速腐蚀试验方法。从液体介质老化、热氧老化、综合环境老化等方面介绍了以橡胶为代表的非金属加速老化试验方法。最后指出目前当量关系确定方法的局限性和多因素综合模拟方法研究方面的欠缺,提出应综合材料、腐蚀、力学、环境等多学科的相关理论和实践,制定更加科学合理的当量关系确定方法,以及注重新型试验设备的研发等建议。     

军用飞机机载设备环境实测技术研究

为解决装备可靠性试验、环境试验、新产品设计以及修订相应环境标准中缺乏装备环境应力实测数据的问题,通过技术论证和探索研究,开展了系列军用飞机机载设番环境的飞行实测工作,取得了实测机种典型任务剖面中的机载设备环境状态,掌握了有关设番舱的综合环境应力情况,从而为进一步编制飞机机载设备综合环境应力试验剖面提供了真实有效的实测数据依据。积累了飞机机载设备环境实测的经验,为我国军用飞机机载设备环境应力数据库的建设奠定了基础。     

Heterogeneous alternative catalysts: A bibliometric and systematic evaluation of their application in solar photocatalytic processes

The present study sought to objectively demonstrate how a researcher can, in a structured way, select relevant articles about alternative heterogeneous catalysts in photocatalytic processes. Therefore, the ProKnow-C (Knowledge Development Process – Constructivist) method was used to systematize the results found, with the application bibliometric and systematic analysis techniques for the evaluation of the results. The search string adopted as criteria was: solar photocatalysis AND heterogeneous catalysts OR alternative catalysts AND effluents. The databases were Web of Science, Science Direct and Scopus. The final bibliographic portfolio obtained for the research theme was made up of 19 articles. It was possible to verify advances in the number of publications on the theme over the evaluated period, with the Journal of Photochemistry and Photobiology A: Chemistry standing out in the final portfolio. Evaluating each article in the portfolio individually, it was possible to verify that most studies use combinations of catalysts already reported to create an alternative material to those already investigated in the literature. Those that use waste as catalysts chose to source this material from treatment plants and the steel industry. Around 58% of the papers used hydrogen peroxide in their processes, while 42% chose not to use it. Finally, approximately 63% of the papers in the portfolio used synthetic effluent in their processes, while the rest (37% of the research) chose to use real effluent. The results obtained in this research by applying the method can contribute to studies related to heterogeneous photocatalysis by alternative means over the years.     

全自动消解-电感耦合等离子体质谱法测定土壤中16种元素

采用HNO_3-HF-HClO_4消解体系,建立了全自动消解-电感耦合等离子体质谱仪测定土壤中~(75)As、~9Be、~(51)V、~(55)Mn、~(59)Co、~(60)Ni、~(63)Cu、~(66)Zn、~(98)Mo、~(111)Cd、~(138)Ba、~(205)Tl、~(208)Pb、~(107)Ag、~(52)Cr、~(121)Sb等16种元素的新方法。通过碰撞池技术和编辑干扰元素校正方程有效校正了质谱干扰,并用内标校正了土壤基体干扰。用土壤标准物质GSS-13验证该方法,其校准曲线相关系数大于0.999 9,方法检出限在0.005~0.5μg/g之间,RSD为0.22%~2.35%,加标回收率为92%~114%。采用该方法测定实际土壤样品,加标回收率为93%~123%。     

多元可燃性气体爆炸压力与中间产物发射光谱特性的耦合研究

工业生产中爆炸事故往往是由多元可燃气体与空气混合后遇到明火而引起的,为研究乙烷（C₂H₆）、乙烯（C₂H₄）、一氧化碳（CO）、氢气（H₂）对甲烷爆炸特性的影响,选取多组分可燃气体甲烷爆炸压力特性和自由基发射光谱的影响进行研究,利用陕西省工业过程安全与应急救援工程技术研究中心重点实验室搭建的多功能球形气体/粉尘爆炸实验装置和单色仪进行爆炸实验测试,同步采集时间—压力曲线、中间产物（OH,CH₂O）的发射光谱信号,考察多组分可燃气体浓度对甲烷爆炸压力特性和中间产物的影响。结果表明:在富氧状态下,多组分可燃气体加剧了甲烷—空气混合体系的爆炸剧烈程度,随着体系中氧气含量的减少、由富氧状态变为贫氧状态、促进作用逐渐减弱转变为阻尼作用,爆炸压力特性与中间产物发射光谱参数的影响规律基本保持一致,均呈高度正相关;多元混合体系爆炸剧烈程度越大,自由基发射光谱达到峰值的速度越快,自由基更早、更快的积累是加剧爆炸程度的原因之一。     

城市居民区配套设备噪声频率特性分析

对绵阳市某居住区典型的配套设备噪声源进行分析,选取变配电房噪声、车库噪声、电梯井噪声、电梯控制室噪声、家用空调室外机、水泵房等6种典型噪声源。分析这些噪声源的频谱及低、中、高频段的能量比率。结果表明,各声源最大声压级所在频段以低频段最多（6种典型噪声中占5种）,最大能量分布频段也是以低频段最多（6种典型噪声中占5种）,因而低频噪声已经成为居住区中影响最大的噪声源。     

城市天然气加气站噪声影响分析及噪声控制技术简

城市天然气加气站位于城市道路和居民区周边。由于加气站地理位置特殊,声源复杂,与周边道路对环境的影响叠加,还要考虑通风散热等问题,噪声治理难度大。目前,国内关于城市天然气加气站的噪声控制研究的报道较少。本研究以合肥市长江西路天然气加气站为例,根据城市天然气加气站加气工艺噪声源及邻近交通噪声对周围环境进行叠加影响预测,根据预测结果和通风散热等工艺要求设计冷却塔安装进风、出风消声器和隔声罩,压缩机安装局部通风隔声罩及压缩机房东墙内安装隔声墙及通风隔声窗等措施。经检验,研究结果好于《工业企业厂界噪声排放标准（GB12348-2008）》中的2类标准的夜间50 dB（A）的标准。该研究设计技术工艺、参数先进合理,费用低且实际简单,为国内天然气加气站噪声预测及治理提供较好的示范作用。     

Degradation of atrazine using solar driven fenton-like advanced oxidation processes

Atrazine (2-chloro-4-ethylamino-6-isopropylamino-s-triazine) was degraded using cobalt-peroximonosulfate (Co/PMS) advanced oxidation process (AOP). Three Co concentrations (0.00, 0.25 and 0.50 mM) and five peroximonosulfate (PMS) concentrations (0, 5, 8, 16 and 32 mM) were tested. Maximum degradation reached was 88% using dark Co/PMS in 126 minutes when 0.25 mM of cobalt and 32 mM of PMS were used. Complete atrazine degradation was achieved when the samples were irradiated by the sun under the same experimental conditions described. Tests for identification of intermediate products allowed identification and quantification of deethylatrazine in both dark and radiated conditions. Kinetic data for both processes was calculated fitting a pseudo-first order reaction rate approach to the experimental data. Having kinetic parameters enabled comparison between both conditions. It was found that the kinetic approach describes data behavior appropriately (R² ≥ 0.95). Pseudo-kinetic constants determined for both Co/PMS processes, show k value of 10^?4 for Co/PMS and a k value of 10^?3 for Co/PMS/ultraviolet (UV). This means, that, with the same Co/PMS concentrations, UV light increases the reaction rate by around one order of magnitude than performing the reaction under dark conditions.     

X射线荧光光谱分析空气滤膜颗粒物中多种元素

采用X射线荧光光谱分析空气滤膜采集悬浮颗粒物中的多种元素,样品不需要前处理,不使用试剂,测量1个样品中40余种元素约耗时1 h。重复测量10次NIST SRM 2783空气滤膜标准样品,多数元素的测量值与标准值基本一致,测量值的标准偏差较小;测量20个空气滤膜实际样品,并与ICP-MS法作比对,大多数元素两种方法测量结果的相对偏差较小,测量值基本一致。