Artificially roughened solar air heater: A comparative study

Artificially roughened solar air heater has been topic in research for the last 30 years. Prediction of heat transfer and fluid flow processes of an artificially roughened solar air heater can be obtained by three approaches: theoretical, experimental, and computational fluid dynamics (CFD). This article provides a comprehensive review of the published literature on the investigations of artificially roughened solar air heater. In the present article, an attempt has been made to present holistic view of various roughness geometries used for creating artificial roughness in solar air heater for heat transfer enhancement. This extensive review reveals that quite a lot of work has been reported on design of artificially roughened solar air heater by experimental approach but only a few studies have been done by theoretical and CFD approaches. Finally this article presents a comparative study of thermo-hydraulic performance of 21 different types of artificial roughness geometries attached on the absorber plate of solar air heater in terms of thermo-hydraulic performance parameter. Heat transfer and friction factor correlations developed by various investigators for different types of artificially roughened solar air heaters have also been reported in this article.     

Mathematical modelling and experimental validation of solar drying of mushrooms

This article presents two mathematical models for drying mushrooms considering the shrinkage effect. Both the models consider the physical changes of mushrooms during drying using the diffusion equation. A convective term is presented in the first model while, in the second model, the effective diffusion co-efficient is employed. Although the diffusion co-efficient is mainly dependent on the water content of the mushrooms, both models are suitable for analyzing the drying process. Moreover, in this study it has been demonstrated that both models are equivalent. The Genetic Algorithmic process was used to estimate the parameter values in different conditions. The information regarding the moisture content and the thickness evaluation taken from the models shows the best fit with the experimental data. The mathematical models developed to simulate the drying curve of mushroom have been evaluated and compared.     

城市天然气加气站噪声影响分析及噪声控制技术简

城市天然气加气站位于城市道路和居民区周边。由于加气站地理位置特殊,声源复杂,与周边道路对环境的影响叠加,还要考虑通风散热等问题,噪声治理难度大。目前,国内关于城市天然气加气站的噪声控制研究的报道较少。本研究以合肥市长江西路天然气加气站为例,根据城市天然气加气站加气工艺噪声源及邻近交通噪声对周围环境进行叠加影响预测,根据预测结果和通风散热等工艺要求设计冷却塔安装进风、出风消声器和隔声罩,压缩机安装局部通风隔声罩及压缩机房东墙内安装隔声墙及通风隔声窗等措施。经检验,研究结果好于《工业企业厂界噪声排放标准（GB12348-2008）》中的2类标准的夜间50 dB（A）的标准。该研究设计技术工艺、参数先进合理,费用低且实际简单,为国内天然气加气站噪声预测及治理提供较好的示范作用。     

Analysis of a solar photovoltaic-assisted absorption refrigeration system for domestic air conditioning

Theoretical model of a solar photovoltaic integrated water-Lithium bromide absorption system is presented for domestic air conditioning. Surplus electrical energy from photovoltaic modules is used for charging the battery, which is utilized during the periods of zero or insufficient solar radiation. Minimum solar area required for each month is calculated and October is identified as the month requiring the highest area of photovoltaic arrays for a constant cooling load of 3.5 kW. The integrated system is found to be capable of sufficient amount of surplus electrical energy generation during both summer and winter months, with a daily excess of about 815 Ah of electrical energy on average over a complete calendar year. Designed system is found to be economically viable, having an energy payback period of 2.7 years.     

X射线荧光光谱分析空气滤膜颗粒物中多种元素

采用X射线荧光光谱分析空气滤膜采集悬浮颗粒物中的多种元素,样品不需要前处理,不使用试剂,测量1个样品中40余种元素约耗时1 h。重复测量10次NIST SRM 2783空气滤膜标准样品,多数元素的测量值与标准值基本一致,测量值的标准偏差较小;测量20个空气滤膜实际样品,并与ICP-MS法作比对,大多数元素两种方法测量结果的相对偏差较小,测量值基本一致。     

北京市机动车尾气排放PM10组分特征研究

为提高机动车尾气排放可吸入颗粒物PM10成分谱的代表性和准确性,提出并采用在机动车尾气检测线上采用稀释通道采样器随机采集机动车排出PM10的采样方法。采集了591辆轻、重型汽油车和柴油车尾气排放PM10,测试并分析了颗粒物的27种组分。数据表明:机动车排放颗粒物PM10中含量丰富的组分为OC、EC、NH+4、NO-3和SO2-4;柴油车排放PM10中OC和EC的质量分数为49.08%,是汽油车(38.38%)的1.3倍,汽油车的OC/EC(2.36)是柴油车(0.78)的3倍;汽油车排放PM10中的二次转化产物(SO42-+NH4++NO3-)的质量分数为19.37%,是柴油车(3.57%)的5.4倍;汽油车排放NH+4是柴油车的5.3倍。     

ICP-MS在环境分析中的质谱干扰及其消除

针对环境领域20个无机元素的ICP-MS分析,总结了同量异位素、氧化物和双电荷、多原子离子等质谱干扰,探讨了影响质谱干扰的因素,提出了消除或降低每个元素质谱干扰的方法:选取合适的同位素、编辑校正方程、选择合适的模式、设置合理的等离子条件等,为建立ICP-MS相关环境标准方法提供参考。     

对氨基偶氮苯盐酸盐溶液色度与吸收光谱的关系

本文研究了对氨基偶氮苯盐酸盐水溶认的色度与吸收光度谱的关系。着重探讨了利用吸鹛光谱确定的溶液的色度。     

青岛东风盐场中极端嗜盐古细菌的特性

从青岛东风盐场分离到3株嗜盐古细菌（编号：ZDA－1,ZDA－2和ZDA－5）,细胞为多形态杆状（0．7～15μm×2．0～50μm）,最适生长NaCl浓度为3．4mol／L,含有甘油二醚脂,类胡萝卜素色素和极性脂TGD－2（三糖基二醚脂）,x（C＋C）分别为63．7％,62．7％,和64．3％,据此,这3株菌可归入嗜盐小盒苗属（Hchoarcula）;但它们不水解淀粉,明胶不液化,不水解酪蛋白等生理生化特性不同于该属中现已正式承认的两个种,因此,本工作分离的3株菌可能是嗜盐小盒菌属一个新种.     

塑料管中氧化-气相分子吸收光谱法测定水中氨氮

建立了塑料管中氧化-气相分子吸收光谱测定水中氨氮的方法,消除了玻璃容器中杂质的干扰。方法空白值低,检出限为0．006mg／L,测定实际水样的精密度≤3.0％,加标回收率为98.4％～104％,与次溴酸盐氧化-分光光度法作比对,结果基本一致。