秦皇岛市太阳能开发利用发展对策研究

根据秦皇岛地理位置特点和城市定位,秦皇岛市开发利用太阳能主要从光伏发电、太阳能生态建筑、太阳能与风能协同进行海水淡化、太阳能与地热复合式空调系统和旅游场所综合利用太阳能等几方面进行发展。     

Investigation of modified horizontal wing cut twisted tapes fitted with rod and spacer at trailing edge on heat transfer properties in Double Glazing V-Trough solar water heaters

An experimental analysis of heat transfer efficiency in double glazing solar water heating system having full-length Horizontal wing cut twisted tapes having twist ratio 3 fitted with rod or spacer of dimensions 125 mm, 250 mm, and 500 mm as length at the trailing edges has been dealt in this work. The experimental results have been compared with a plain tube with similar operating conditions and concluded that variation in the Nusselt number, as well as friction factor, are ±12.56% and ±10.17%, respectively. The result of empirical correlation concludes that Nusselt number is maximal for horizontal wing cut twisted tapes having rod or spacer at its ends while comparing with full-length horizontal wing cut twisted tapes. The friction factor is low for full-length horizontal wing cut twisted tapes than the horizontal wing cut twisted tapes fitted with rod or spacer. The horizontal wing cut twisted tapes fitted with rod has superior performance than twist fitted with spacer.     

中国的太阳能资源及应用潜力

太阳能资源被认为是21世纪最引人注目的可再生能源和洁净能源，为了经济的可持续发展，应该把环境保护和长期利益作为研究目标，文章估算了中国14个城市的太阳能资源，分析了太阳能热水系统和PIVP系统的经济性，研究结果表明，中国的太阳能利用潜力很大，政府应该对其发展发挥重要作用。     

Model reactor for photocatalytic degradation of persistent chemicals in ponds and waste water

A laboratory scale flow-through model reactor for the degradation of persistent chemicals using titanium dioxide (TiO₂) as photocatalyst immobilized on glass beads is presented. In the test system with a volume of 18 L contaminated water is pumped to the upper part of the floating reactor and flows over the coated beads which are exposed to UV-radiation. The degradation of two dyes of different persistance was investigated. Primary degradation of methylene blue did not fit a first order kinetic due to coincident adsorption onto the photocatalyst and direct photolysis, resulting in a half-life of 6 h. A filtrate of a green algae suspension accelerated the colour removal. In contrast, reactive red 2 was degraded only by photocatalysis; neither adsorption nor direct photolysis led to a colour removal. The course of primary degradation followed a first order kinetic with a half-life of 18 h and a rate constant of 0.04 h⁻¹. Analysis of the degradation products indicated mineralization by detection of NO₂⁻ and NO₃⁻, accompanied by a decrease of pH and an increase of conductivity. A successful adaptation of the model reactor (scale 1:10) to dimensions required for surface waters and waste water treatment plants would be a costefficient and environmentally sustainable application of photocatalysis for the treatment of industrially polluted water and could be of relevance for third world contries, particularly those favoured by high solar radiation.     

相变储能光伏太阳能热泵干燥系统的研究

建立了相变储能光伏太阳能热泵干燥系统实验平台,介绍了系统的运行方式以及太阳能光伏集热蒸发器与直流压缩机的匹配计算,最后对实验数据进行了分析。结果表明,太阳能辐照量为800 W/m~2、光伏集热蒸发器面积为12 m~2的条件下,系统制热功率为10 k W,太阳能光伏集热蒸发器发电量为6.2 k W·h,大于直流压缩机的耗电量,满足供电要求;实验所得系统COP为3.25。相变储能可以解决太阳辐照波动导致的系统运行不稳定问题,具有显著的节能性和环保性。     

太阳电池阵基板原子氧防护膜试验评价研究

对太阳电池阵基板用涂有有机硅／SiO2杂化涂层的Kapton膜进行的工程化应用试验评价研究进行了介绍。通过真空下材料的出气试验,对材料的总质量损失（TML）和可凝挥发物（CVCM）进行了测试。进行了温度冲击试验、粒子辐照试验,对涂层的环境耐受性进行了研究。通过原子氧试验,对带涂层薄膜的原子氧剥蚀率进行了研究。此外还对涂层薄膜进行了力学性能试验和粘接性能试验,对带涂层薄膜的拉伸强度、胶接剪切性能及与基板胶接后的剥离性能进行了测试。试验结果表明防护涂层满足工程应用的技术要求。     

Perceptions towards solar mini‐grid systems in India: A multi‐stakeholder analysis

This study identifies and assesses the perspectives of four key stakeholder groups towards solar minigrids in rural India. The stakeholders considered are policymakers, minigrid developers and operators, development organizations, and national grid representatives. Recent state and national policies in India have increased the focus on minigrids and their services. In this study, stakeholder interviews were employed to identify the attitudes towards the recent electricity policy, the underlying context for minigrid development, the role of minigrids in rural electrification, and the inclusion of minigrid systems within the larger framework of electricity sector policies by the recent government minigrid policies. Results indicate that stakeholders agree that minigrids, as a rural electricity service, are currently viable to complement the national grid due to their high reliability, performance in remote regions, and diminishing cost per unit. However, stakeholders disagree on the future outcomes, with diverging views on the priority of minigrids as an electrification tool in the face of the expanding central grid, the ideal implementation strategy for minigrids, and the potential for grid‐minigrid interaction. Based on stakeholder feedback, the growth of minigrids in India is likely to be constrained by the confidence in recent policies, necessitating more frequent dialogue among decision makers and a solidified relationship to the national electricity grid.     

Experimental investigation on effect of an absorber plate covered by a layer of sand on the efficiency of passive solar air collector

A passive flat-plate solar air collector was constructed in the laboratory of New and Renewable Energy in Arid Zones, Ouargla University, South East Algeria. The absorber of the passive flat-plate solar air collector was laminated with a thin layer of local sand. This acted as a thermal packed bed with a collecting area of 0.5 m² (1 m × 0.5 m). Three series of experiments were performed. The first consisted of choosing the best sand brought from three different places of the Algerian desert. The second consisted of studying the effect of the thickness of the sand layer on the daily efficacy of the collector. The influence of the sand diameter was investigated in the third series. The experimental results showed that: All collectors covered with sand had higher efficiency than those without. It was noticed that, for a fixed mass of sand (given thickness of the sand layer), the improvement of the collector was inversely proportional to the sand particle diameters. The maximum efficiency approximates 62.1% for a particle diameter 0.063 mm, compared to 41.71% for a diameter 0.250 mm.The efficiency of the collector for a fixed particle diameter increases with the increase in the thickness of the sand layer. The collector with thickness sand layer 0.84 mm gave the best efficiency of 46.14% compared to 27.8% for 0.28 mm of thickness sand layer.     

Comparisons and critical assessment of global and diffuse solar irradiation estimation methodologies

Defining better methodologies of accurate predictions of the amount of monthly mean daily global and diffuse solar irradiation exposed is of utmost importance in order to determine the potential for utilizing the solar energy. This study compares and discusses the main methodologies, databases, and software that are used in estimating the solar irradiation to be used for the short- and long-term performances and feasibilities of solar energy systems, especially photovoltaic power plants in Turkey, and addresses the best one to be used to make the most accurate estimations. The comparisons are carried out between the recent methodologies developed by the authors, some models taken from the related literature that are concluded to be better, a widely used database, namely Meteonorm, and a widely used software, namely EU PVGIS. The reference data to develop the methodologies and to make comparison are provided from the State Meteorological Service of Turkey, which is the responsible body in Turkey to make measurements of solar irradiation. The comparisons are based on monthly mean daily values of global and diffuse solar irradiation and are carried out by statistical errors: mean bias error and root mean square error. The results showed that the methodology developed by the authors has shown better performances in estimating the monthly mean daily global and diffuse solar irradiation amount for Turkey.     

An investigation of double-glass-covered trapezoidal salt-gradient solar pond coupled with reflector

In the present study, a trapezoidal salt-gradient solar pond (TSGSP) has been investigated experimentally. The top surface of solar pond has been covered with double-glass cover in order to reduce the evaporative and convective losses from the top. This results in increase of temperature even in the top zone of the solar pond and leads to more volume utilization for heat storage in the pond. A reflector made of aluminium sheet has been used to enhance the solar intensity on the solar pond during sunny hours. A procedure, to determine optimum tilt angle of reflector in order to utilize maximum amount of solar energy at noon, has been proposed. The use of reflector enhanced the average solar intensity on the top surface of solar pond by 22%. The maximum average temperature of trapezoidal solar pond with glass cover and reflector has been observed to be 70.5°C. The thermal efficiencies of LCZ, NCZ and UCZ for the trapezoidal solar pond with double-glass cover and reflector have been estimated to be 32.73%, 23.22% and 5.30%, respectively. In addition to experimental investigation, the sunny area ratio of TSGSP has been theoretically computed and compared with the cuboid solar pond having same top surface area and depth in order to see the effect of pond shape on sunny area ratio. The average yearly sunny area ratio of trapezoidal solar pond has been determined to be 11% higher than that of cuboid one.