矿渣与工业废渣改良黄土的性能与机理研究进展

黄土在世界上分布面积较广,在我国也有约60×104 km2的分布,具有湿陷性是其区别于其它区域性土的最显著特点,并由此引发造成各种地质灾害和工程问题.采用石灰、水泥或高分子材料等对其进行改性以达到消除湿陷性或提高黄土强度的目的,是岩土工程领域的重要课题.选用矿渣和工业废渣作为改性参料,用以研究改性黄土的力学特性变化和改...     

高浓度废液纳滤膜分离工艺设计

当进行高浓度废液纳滤膜分离工艺设计时,必须首先进行纳滤膜分离工艺试验,通过工艺试验确定：纳滤膜型号,完成膜的筛选工作;确定纳滤膜分离规律、分离模型、膜污染规律。利用获得的数学关系式确定主要操作运行压力、浓缩液流量、膜面积、组件数目、膜组件排列方式、冷却循环系统设计、纳滤膜污染的预测与清洗系统设计。纳滤膜清洗系统与自控系统应该根据试验结果并考虑纳滤膜生产商提供的数据进行设计。     

垃圾填埋场渗滤液运移规律分析与模拟

基于多孔介质流体力学、多相流以及土壤水动力学理论,利用理论分析和数值模拟相结合的方法,研究了垃圾填埋场中渗滤液运移过程的基本规律,并对填埋场底部可渗和不可渗2种情况下渗滤液的运移规律进行了模拟比对,研究成果可为填埋场渗滤液控制系统的设计和管理提供科学的理论依据和技术支持。     

浙江省危险废物和污泥处置现状及加强全过程监管工作的探讨

随着近几年经济发展水平的提高,浙江省的危险废物和污泥产生量呈不断增长趋势,它们的产生、贮存、转运和处置过程中的监管压力也逐年增大。总结了浙江省的危险废物产生现状,分析了存在的主要问题,对比了发达国家的相关管理经验,提出了进一步完善浙江省危险废物和污泥全过程监管工作的建议。     

Study of Trace Elements and Soot in Aerosols from a Coal-Fired Power Plant in Northern Vietnam

Two measurement campaigns were conducted in two sampling sites, An Thinh and Duy Minh, in northern Vietnam during the months of November–December 2000 and November 2001–February 2002 in order to investigate the extend of the particulate air pollution from the Pha Lai coal fired power plant. Fine particle samples were analyzed by Energy Dispersive X-Ray Fluorescence spectrometry and soot samples were analyzed by reflectometer. The result showed that high concentration of soot and elements mostly coincided with the air masses originating from the power plant. Sea spray aerosol was found to be the major source of chlorine at both sites. Ratios of specific elements and principal component analysis (PCA) revealed that coal combustion was the main contributor to the air pollution at both sites. PCA also indicated that there were other sources responsible for the elements emission, probably the influence of long distance transport and Asian Brown Cloud.     

Groundwater Pollution Around an Industrial Area in the Coastal Stretch of Maharashtra State, India

The main objective of this paper is to examine pollution threat, especially to the groundwater resources, around Tarapur industrial area (also called the Tarapur MIDC area) located on the Arabian Sea Coast in Thane District of Maharashtra State, India and suggest remedial measures that may also be relevant to other industrial areas on the Indian Sea Coast. One hundred and thirty one samples were collected from various sources, such as dugwells, borewells, dug-cum-borewells, effluent sumps, drainage channels (effluent channels), creeks and ocean, for chemical analyses. These analyses show that the area in general is characterized by hard water and high salinity hazard, possibly due to its proximity and hydraulic connection with the sea. Although the potability of groundwater is questionable in certain pockets, it is good enough for irrigation purposes at present. Low pH value and high heavy metal contents in the adjoining Muramba creek water is a matter of great concern and may be attributed to the indiscriminate disposal of industrial effluents to the drainage channels connecting the creek. Muramba Creek is well connected with the Arabian Sea, and there are evidences of seawater intrusion around this creek. Because of the fact that Muramba Creek is highly polluted, and is hydraulically connected with the dugwells and borewells surrounding the creek, it cannot be ruled out that the groundwater around this creek is susceptible to contamination. Unless measures are not taken immediately to stop the indiscriminate disposal of the solid wastes and liquid effluents in open ground and drainage channels, and measures are not taken to maintain the appropriate pH values at the effluent treatment facilities before their disposal, the problem would indeed be formidable one day, and it will be too late then for the authorities to take care of the resulting maladies. Few suggestions have been given for controlling and managing the industrial pollution around the Tarapur MIDC area. These suggestions are relevant to other industrial areas situated on the 7,000 km long Indian Sea Coast.     

Relation of waste generation and composition to socio-economic factors: a case study

To develop an effective waste management strategy for a given region, it is important to know the amount of waste generated and the composition of the waste stream. Past research has shown that the amount of waste generated is proportional to the population and the average mean living standards or the average income of the people. In addition, other factors may affect the amount and composition of waste. These are climate, living habits, level of education, religious and cultural beliefs, and social and public attitudes. This paper presents the findings of a study carried out in a suburban municipal area in Sri Lanka to determine the solid waste generation rate and waste composition based on field surveys and to determine the related socio-economic factors. A database was developed that included information on the quantity and composition of waste generated in a sample of households in the study area over a time period. The collected data was analysed to relate waste generation and composition data to various socio-economic factors. Over 400 sample households were selected for the study using a stratified random sampling methodology based on municipal wards and property values. A technique that considers both the number of households in a particular income group (property value range) and the standard deviation of property values within a given income group was used to determine the appropriate sample size for each municipal ward. Through category and regression analyses, the quantities of waste and waste composition were related to several socio-economic factors. The paper describes the basis for the sample selection, the methodology adopted for data collection, the socio-economic parameters used for the analysis, and the relationships developed from the analysis.     

生物过滤技术在大气污染控制中的应用

生物过滤是控制大气污染的经济有效技术,具有较好的发展前景。本文介绍了生物过滤技术处理废气的研究,应用历史,现状,和生物过滤理论,分析了工艺的使用范围,设计及运行控制要点,列举了应用的范例。     

HAN基ECSP凝胶模型的构建与分子动力学模拟

目的 从微观分子的角度对硝酸羟胺(HAN)基电控固体推进剂(Electrically Controlled Solid Propellants,ECSP)的性能参数进行模拟与计算。方法 利用分子表面静电势(ESP)对HAN分子2种可能的构型进行优化和稳定性分析。通过真空非周期性分子动力学模拟得到聚乙烯醇(PVA)分子稳定构型,并以HAN基ECSP的主要成分按一定比例构建凝胶模型。基于RESP(Restrained Electrostatic Potential)电荷生成更准确的凝胶模型拓扑文件,并进行凝胶模型的分子动力学模拟、模型稳定分析以及模型参数计算。结果 凝胶模型总能量相对平均值的周期性波动不超过7%。由于三维PVA链的包裹,H2O分子的扩散系数被大幅削弱。氢键分析和径向分布函数表明氢键键长主要分布在0.282 6 nm附近,PVA与H2O间的氢键较少,H2O与HAN、H2O与H2O之间的氢键较多。模型密度为1.405 g/cm³,与实验值吻合度高。在283、293、303 K下,HAN基ECSP凝胶模型的拉伸模量依次降低,剪切模量先增后减。在15 K/600 ps冷却速率下,HAN基ECSP凝胶模型的拉伸模量和剪切模量均增大。结论 ECSP制备结束后,冷却过程中的环境温度不宜过高,否则容易造成ECSP力学性能的快速下降,快速冷却可以提高ECSP的力学性能。     

拉伸加载下老化复合固体推进剂的损伤演化定量分析

目的 定量分析老化对拉伸加载下复合固体推进剂细观损伤演化的影响规律。方法 开展不同老化时间（0、32、74、98 d）下三组元端羟基聚丁二烯（HTPB）复合固体推进剂的热加速老化试验,以及老化后推进剂的微型哑铃形试验件在不同拉伸应变水平（0、5%、10%、20%、40%、50%）下的微CT扫描观测试验,并对扫描重构图像进行定量分析,获得老化对推进剂细观损伤演化的影响规律。结果 随拉伸应变增加,老化前后推进剂微CT图像的灰度均方差、平均孔隙率和图像的分形维数均呈非线性增加趋势,图像的灰度均值呈非线性减小趋势。在较低应变水平（<10%）下,上述参数受老化时间的影响不显著,但随拉伸应变增加（≥10%）和老化时间增长,灰度均方差、平均孔隙率、孔隙率增量和分形维数的数值整体增高,而灰度均值随老化时间的增长而降低,且不同老化时间下,分形维数与平均孔隙率之间存在正线性关系。结论 重构得到微CT图像的灰度均值、平均孔隙率和分形维数可作为表征参数,用于定量分析老化复合固体推进剂在拉伸载荷下的细观损伤和损伤的动态演化规律,推进剂的初始损伤和小应变下的损伤程度受老化的影响较弱,而老化时间对推进剂细观损...