热解析-固相微萃取-气相色谱法测定空气样品中挥发性有机化合物

建立了热解析-固相微萃取-气相色谱法测定空气样品中挥发性有机化合物的分析方法,并对色谱分离条件、玻璃针筒保存样品的稳定性、固相微萃取萃取纤维、萃取时间、色谱进样时间等条件进行了优化,9种挥发性有机化合物的峰面积与其质量浓度在所测范围内有较好的线性关系,相对标准偏差＜8.8%,检出限为0.05～0.75 μg/100 mL,满足实际空气样品测定需要。     

青藏高原地区准好氧填埋单元试验研究

为研究准好氧填埋技术在海拔高、空气稀薄、气温低、昼夜温差大、蒸发强、降雨少的青藏高原地区的适用性,在青藏高原不冻泉地区开展了为期14个月的准好氧填埋单元试验研究.试验结果表明,准好氧填埋单元的渗滤液COD浓度由3307 mg/L降低到403 mg/L,氨氮由135.4 mg/L降低到0.04 mg/L,渗滤液量大幅减少.研究为青藏高原地区提供了一种垃圾处理方式.     

城市垃圾焚烧飞灰中重金属的形态及酸浸出性研究

研究了城市垃圾焚烧飞灰中重金属形态在不同粒径上的分布,以及HNO3对飞灰中重金属的浸出性.结果表明:飞灰中重金属主要以残渣态存在,可交换离子态含量很少;易挥发性的重金属在较大粒径上有较高分布,亲石性重金属Cr和Ni的分布与粒径的相关性不大,在各粒径上的分布较均匀;飞灰中以碳酸盐结合态存在的重金属对酸不稳定,易被HNO3浸出,而残渣态部分对酸较稳定,不易被HNO3浸出.     

Transformations of particles, metal elements and natural organic matter in different water treatment processes

Characterizing natural organic matter （NOM）, particles and elements in different water treatment processes can give a useful information to optimize water treatment operations. In this article, transformations of particles, metal elements and NOM in a pilot-scale water treatment plant were investigated by laser light granularity system, particle counter, glass-fiber membrane filtration, inductively coupled plasma-optical emission spectroscopy, ultra filtration and resin absorbents fractionation. The results showed that particles, NOM and trihalomethane formation precursors were removed synergistically by sequential treatment of different processes. Preozonation markedly changed the polarity and molecular weight of NOM, and it could be conducive to the following coagulation process through destabilizing particles and colloids; mid-ozonation enhanced the subsequent granular activated carbon （GAC） filtration process by decreasing molecular weight of organic matters. Coagulation-flotation and GAC were more efficient in removing fixed suspended solids and larger particles; while sand-filtration was more efficient in removing volatile suspended solids and smaller particles. Flotation performed better than sedimentation in terms of particle and NOM removal. The type of coagulant could greatly affect the performance of coagulation-flotation. Pre-hydrolyzed composite coagulant （HPAC） was superior to FeCl3 concerning the removals of hydrophobic dissolved organic carbon and volatile suspended solids. The leakages of flocs from sand-filtration and microorganisms from GAC should be mitigated to ensure the reliability of the whole treatment system.     

Non-UV based germicidal activity of metal-doped TiO2 coating on solid surfaces

A stain-based screening method was developed to screen different catalyst coatings for their germicidal activity. A Baclight dead/live bacteria viability kit （invitrogen, molecular probes） was used for staining the cell. The screening was carried out following a standard procedure. This included loading cell suspension to solid surface and maintaining contact for 30 min, then staining with a mixture containing dyes. The stained cells were observed using an epifluorescent microscope and photographed with a CCD camera under UV. Metal-doped TiO2 coatings on AI plates were prepared and tested for non-UV germicidal activity without using UV. It was tested using model microorganisms such as Bakers Yeast （Saccharomyces cerevisiae）, Bacillus subtilis, Pseudomonas putida, and Escherichia coli. On the basis of the germicidal activity of catalyst and the degree of damage caused to the cells, the stained cells may appear green （viable）, green with red or yellow nuclei and yellow （compromised） or red （nonviable）. According to their stained color, cells were counted to calculate the percentage of dead, live, and compromised cells. Compromised cells are cells that grow very slowly after reculturing indicating a degree of reversible cell damage. Screening the germicidal activity using this staining method is accurate and efficient, and requires less time than the culture-based method. A modification to the procedure for measuring germicidal activity of rough surfaces or fibrous coatings was developed. Both TiO2 and metal-doped TiO2 （Ag, Pt, Au, Cu） possess non-UV based germicidal activity. The germicidal activity of TiO2 was found to be related with its wetting property and can be improved by UV irradiation before testing. It is not greatly affected by contact time, indicating a fast acting germicidal activity.     

固体废物全过程管理中固体废物鉴别研究

对固体废物应进行全过程管理,固体废物鉴别是固体废物全过程管理的基础和关键,包括依据产生来源鉴别和过程鉴别两种方法,依据产生来源鉴别包括丧失原有利用价值的物质、在生产过程中产生的副产物、环境治理和污染控制过程中产生的物质、其他物质四类,在每一类中详细地列举了属于该产生来源的具体固体废物种类名称,便于理解和增强可操作性。过程鉴别包括在固体废物再生利用过程和处置过程中的固体废物鉴别两类,其中在再生利用过程的固体废物鉴别中明确指出了固体废物再生利用产物只有同时满足产品质量标准要求、国家污染控制标准要求以及有实际市场需求、固定用户等条件时,才不作为固体废物管理,在处置过程的固体废物鉴别中具体地列出了处置固体废物全过程中仍然作为固体废物管理的国际惯用处置方式。同时,给出了清晰的"原料—产品—固体废物—处置或产品"全过程中固体废物的产生节点和相应的固体废物类别图,为固体废物鉴别工作提供参考,使固体废物全过程管理有的放矢,有效防止固体废物对环境和人体健康造成的危害。     

Vermicomposting as an advanced biological treatment for industrial waste from the leather industry

The leather industry (tanneries) generates high amounts of toxic wastes, including solid and liquid effluents that are rich in organic matter and mineral content. Vermicomposting was studied as an alternative method of treating the wastes from tanneries. Vermicompost was produced from the following tannery residues: tanned chips of wet-blue leather, sludge from a liquid residue treatment station, and a mixture of both. Five hundred earthworms (Eisenia fetida) were added to each barrel. During the following 135 days the following parameters were evaluated: pH, total organic carbon (TOC), organic matter (OM), cation exchange capacity (CEC), C:N ratio, and chromium content as Cr (III) and Cr (VI). The results for pH, TOC and OM contents showed decreases in their values during the composting process, whereas values for CEC and total nitrogen rose, indicating that the vermicompost reached maturity. For chromium, at 135 days, all values of Cr (VI) were below the detectable level. Therefore, the Cr (VI) content had probably been biologically transformed into Cr (III), confirming the use of this technique as an advanced biological treatment. The study reinforces the idea that vermicomposting could be introduced as an effective technology for the treatment of industrial tannery waste and the production of agricultural inputs.     

Olive oil mill wastewater for soil nitrogen and carbon conservation

In this work the application of two levels of N fertilizer (NH₄NO₃) dissolved in water or olive oil mill wastewater (OOMW) diluted 10 or 20 times in water, has been studied in relation to the properties of two soils (Loam and Silt-Clay-Loam). Also, the effect of irrigation water bubbled with CO₂ (Dissolved Inorganic Carbon, DIC) was studied. Nitrate N, ammonium N, total N, organic C (OC), and CaCO₃ contents were determined in the soil as well as pH, electrical conductivity (EC), oxidation–reduction potential (ORP), and absorbance at 250 and 360 nm.     

生物反应器填埋的沉降加速效应

通过实验室填埋柱模拟实验,研究了生物反应器填埋操作方式对填埋层沉降的影响。结果表明：与传统卫生填埋方式相比,回灌经厌氧生物处理后渗滤液的生物反应器填埋方式能够加速填埋层的沉降,140 d内沉降提高比例达10%以上。我国填埋垃圾高含水率、高易腐有机物含量的特性,使得其填埋层的次沉降系数高于文献值。填埋垃圾有机物降解量及其引起的垃圾水分排出量与填埋层沉降有显著相关性,表明有机物降解是引起填埋层沉降的重要因素,也是造成生物反应器填埋与传统卫生填埋方式初期沉降差异的主要原因。     

The effect of recycling price uncertainty on municipal waste management choices

This paper analyzes the effect of price uncertainty and irreversible investment on the decision of municipalities to switch from landfill waste disposal to recycling by developing a model to predict recycling adoption behavior and applying it to empirical data. It is shown that uncertainty regarding the price of recycled materials may induce a risk neutral municipality to prefer landfill disposal, even when recycling is less expensive. A model is developed to describe the switching process and estimate its parameters using empirical data from 79 municipalities in Israel. The model is then used to predict municipalities' recycling adoption decisions under various assumptions regarding price uncertainty. The results support the hypothesis that price uncertainty is a major obstacle for recycling. Finally, several options for price stabilization are sketched and it is argued that these policies may be effective in establishing viable recycling markets.