胞外聚合物磷酸盐形态对生物除磷过程的影响研究

以不同DO条件下污泥龄(SRT)分别为10 d和30 d的两组实验室A/O-SBR反应器活性污泥为研究对象,探讨了胞外聚合物(EPS)磷酸盐形态对生物除磷过程的影响.结果表明,污泥絮体中的磷主要分布于EPS中,PO3-4-P和聚磷酸盐(Poly-P,包括低分子量聚磷酸盐LMW PolyP和高分子量聚磷酸盐HMW Poly-P)是EPS磷的主要形态;EPS对生物除磷的影响明显大于细菌细胞,EPS磷的厌氧降低量和好氧升高量为胞内磷变化量的2.8~6.4倍.EPS中的LMW Poly-P和HMW Poly-P含量均表现厌氧降低和好氧升高的变化规律;对于相同SRT的污泥,中DO(2.5~3.5 mg·L-1)条件较低DO(0.7~1.0 mg·L-1)条件下EPS的LMW Poly-P和HMW Poly-P有更大的厌氧降低量和好氧升高量,对应着更明显的生物除磷过程,说明EPS不仅是生物除磷过程的中转站,而且参与了生物聚磷过程.     

树脂基固态胺吸附剂室温下对低浓度CO2的吸附性能研究

以大孔甲基丙烯酸酯吸附树脂为载体,聚乙烯亚胺(PEI)为有机胺,采用液相浸渍法制备出固态胺吸附剂,并研究了其在室温下对低浓度CO2的吸附行为.同时,利用氮气吸附、热重分析和扫描电镜表征了材料的物理化学性质,并采用热重法和固定床吸附法考察了材料的CO2吸附性能.结果表明,大孔树脂担载50%PEI(质量分数)时吸附性能最佳,对纯CO2的最大吸附量为175 mg·g-1;CO2的吸附行为由扩散动力学与吸附热力学共同决定,低温有利于提高吸附容量;吸附剂对400 ppm~15%浓度的CO2都具有优异的动态吸附性能,其中对400 ppm CO2的吸附量达到86 mg·g-1,对15%CO2的吸附量达到150 mg·g-1;湿度对吸附起促进作用,相对湿度为10%时,对400 ppm CO2的吸附量提高至139mg·g-1;吸附剂具有优异的循环性能,具有直接空气捕集CO2的潜力.     

固相萃取-高效液相色谱法测定水中丙烯酰胺研究

采用固相萃取-高效液相色谱法对水中的丙烯酰胺定性、定量分析。结果显示:丙烯酰胺含量在20μg/L~400μg/L之间呈良好线性关系,回归方程Y=0.476 8X+0.845 4,相关系数R为0.997 72,检出限0.1μg/L,样品回收率在71.85%~92.28%之间,相对标准偏差为3.4%~10.9%。该方法减少了有机溶剂用量,缩短了有机溶剂暴露时间,降低污染,且能满足地表水环境质量标准(GB 3838-2002)限值要求,是水中丙烯酰胺含量准确稳定的检测方法。用该方法测定了呼和浩特市引黄入呼左岸、右岸、中浅和中深4个断面水样,均未检出丙烯酰胺。     

生活垃圾源头沥水的减量提质效应研究

针对我国生活垃圾厨余组分含量高、含水率高和热值低的特点,提出以降低厨余组分含水率为主要手段,实现生活垃圾源头减量和提质为主要目标的源头沥水和选择性分质收集模式.在苏州市两个居民小区进行了为期10个月的项目试点,监测结果显示,居民家庭采取源头沥水措施后,生活垃圾产生量减少6.47%,含水率降低2.23%,低位热值提高10.94%.生活垃圾源头沥水的减量提质效应良好,有助于提高后续焚烧及填埋处理设施运行效率和二次污染控制水平,降低运输及处理成本.     

澳门城市垃圾焚烧底灰的重金属淋溶及其遗传毒性评价

应用美国国家环境保护局推荐的毒性特性溶出程序(toxicitycharacteristicleachingprocedure,TCLP),以及ICP-MS和ICP-AES技术研究了澳门城市垃圾焚烧底灰中重金属的淋溶,并结合蚕豆根尖微核试验评价了其潜在的生态与健康风险.结果显示,该底灰淋溶出来的重金属元素:铝(Al)、锰(Mn)、钴(Co)和汞(Hg)的浓度低于0.01mg·L-1,铁(Fe)、铜(Cu)和钼(Mo)的浓度低于0.1mg·L-1,而铬(Cr)、锌(Zn)、硒(Se)、锶(Sr)、钡(Ba)和铯(Cs)的浓度在0.11mg·L-1￣2.19mg·L-1之间.需要注意的是淋溶液中铅(Pb)的浓度异常高,最高可达19.06mg·L-1,超过了美国相关标准的上限(5mg·L-1);对比不同条件下底灰中重金属的淋溶情况,表明溶解作用和淋溶液的pH值是影响其淋溶的2个重要因素.蚕豆根尖微核试验显示各淋溶液处理组根尖细胞微核率明显升高,与阴性对照组相比具有显著性差异(p<0.05),表明各淋溶液具有遗传毒性;随着淋溶液中重金属浓度的增加,蚕豆根尖细胞所表现出来的毒性效应增强,表明重金属是淋溶液具有遗传毒性的重要原因.     

微波技术在固体废弃物处理中的应用

介绍了微波加热的基本原理,综述了微波技术在工业污泥、医疗垃圾、废旧轮胎、电子垃圾以及建筑垃圾等固体废弃物处理中的应用现状,展望了微波技术在污染控制领域的应用前景.     

Pyrolysis of rice husk and sawdust for liquid fuel

The paper is focused on studying how to convert rice husk and sawdust into liquid fuel. Rice husk, sawdust and their mixture were pyrolyzed at the temperature between 420℃ and 540℃, and the main product of liquid fuel was obtained. The experimental result showed that the yield of liquid fuel heavily depended on the kind of feedstock and pyrolysis temperature. In the experiments, the maximum liquid yields for rice husk, sawdust and their mixture were 56% at 465 ℃, 61% at 490℃ and 60% at 475℃ respectively. Analysis with GC-MS and other apparatus indicated that the liquid fuel is a complicated organic compound with low caloric value and can be directly used as fuel oil without any up-grading. As a crude oil, the liquid fuel can be refined to be vehicle oil.     

某基岩区工业固体废物填埋场地递进式场地环境调查实例

针对某基岩区简易封场后的固体废物填埋场,采用多层次、递进式调查策略,配合使用地球物理探测、直压式土壤快速取样、现场快速检测等技术,分3个阶段开展填埋场及其周边环境调查。第1阶段,调查地质环境特征,开展地球物理探测;第2阶段,调查填埋物、渗滤液主要组分及对周边积水、农田土壤、民用井水的污染情况;第3阶段,划定重点污染区域,开展土壤和地下水污染调查。调查结果显示,填埋区已发生明显渗漏,对邻近区域土壤、地下水及地表积水造成了一定污染,但未对周边农用地土壤、民用井水质等产生不利影响,总体处于可控范围。提出,通过削减污染源,切断污染物迁移、暴露途径,消除已有污染影响,长期跟踪监测等多项管控治理措施进行综合整治。     

Fruit Stones from Industrial Waste for the Removal of Lead Ions from Polluted Water

Lead, one of the earliest metals recognized and used by humans, has a long history of beneficial use. However, it is now recognized as toxic and as posing a widespread threat to humans and wildlife. Treatment of lead from polluted water and wastewater has received a great deal of attention. Adsorption is one of the most common technologies for the treatment of lead-polluted water. This technique was evaluated here, with the goal of identifying innovative, low-cost adsorbent. This study presents experiments undertaken to determine the suitable conditions for the use of peach and apricot stones, produced from food industries as solid waste, as adsorbents for the removal of lead from aqueous solution. Chemical stability of adsorbents, effect of pH, adsorbents dose, adsorption time and equilibrium concentration were studied. The results reveal that adsorption of lead ions onto peach stone was stronger than onto apricot stone up to 3.36% at 3 h adsorption time. Suitable equilibrium time for the adsorption was 3–5 h (% Pb adsorption 93% for apricot and 97.64% for peach). The effective adsorption range for pH in the range was 7–8. Application of Langmuir and Freundlich isotherm models show high adsorption maximum and binding energies for using these adsorbents for the removal of lead ions from contaminated water and wastewater.     

我国危险废物特性鉴别技术体系研究

详细深入地调查分析了国外危险废物鉴别技术体系的特点和适用条件,以及我国危险废物管理的特点.在借鉴国内外经验与教训的基础上,提出了我国危险废物特性鉴别的技术路线及危险废物鉴别的环境保护目标,建立了危险废物鉴别技术的方法学.在充分研究的基础上,编制完成了全新的<国家危险废物名录>和<危险废物鉴别标准>,以及相应的规范和方法标准.这些技术文件形成了我国独特、完整的危险废物鉴别技术体系,为全面开展危险废物无害化管理提供了有力的技术支持.