水体中硼的去除方法研究进展

硼是人体与动、植物必需的一种微量元素。然而,当水中硼浓度超过最大允许值,将对人体和部分动、植物产生严重的负面影响。硼独特的物化性质导致常规水处理方法对硼的去除效果较差。论述了各种水处理除硼方法,包括化学沉淀、吸附、离子交换、液液萃取、纳滤、反渗透、正渗透、膜蒸馏、组合工艺和其他方法;分析了各种除硼方法的分离过程、影响因素和优缺点等;展望了水处理除硼方法发展趋势,认为开发出能在中性p H条件下快速高效除硼的膜,以及具有高硼吸附量、易再生和回收硼的特效硼吸附剂是除硼水处理技术的发展方向。     

基于非对称流场流分离技术的纳米银分离监测方法

以纳米银(AgNPs)作为典型的纳米颗粒物,利用非对称流场流分离技术构建纳米颗粒物的分离监测方法。制备了柠檬酸盐稳定的AgNPs分散液,采用透射电镜、紫外可见分光光度计、Zeta电位分析仪对AgNPs分散液进行了表征。结果表明,AgNPs半径多数小于10 nm,最大吸收波长为400 nm,Zeta电位为-42.56 m V。采用非对称流场流分离仪对AgNPs进行粒径分离,得到UV-Vis信号谱图,并收集得到半径小于10 nm、10~30 nm、30~50 nm、50~70 nm、70~100nm范围的AgNPs颗粒,结合电感耦合等离子体质谱仪测定每个粒径范围内AgNPs的质量浓度。结果表明,该方法重现性良好,AgNPs在半径小于10 nm的范围内达到了UV-Vis吸收峰值,响应信号最高为0.022 5~0.027 5 V,表明半径小于10 nm的AgNPs浓度较高。半径小于10 nm、10~30 nm、30~50 nm、50~70 nm、70~100 nm范围内AgNPs的质量浓度分别为(1 021.86±61.74)μg/L、(323.23±45.83)μg/L、(72.90±32.14)μg/L、(44.64±9.28)μg/L、(39.12±5.04)μg/L,回收率为43.96%±0.84%。     

计算流体力学技术在膜分离过程中的应用与进展

计算流体力学（ComputationalFluidDynamics，CFD）技术近年被广泛地应用于膜分离过程模拟中。本文评述了CFD研究膜分离过程中流体力学、膜污染机理和浓差极化等现象，以及CFD技术在微滤、超滤、反渗透中的研究进展及待解决问题等。     

Separation of polycarbonate and acrylonitrile–butadiene–styrene waste plastics by froth flotation combined with ammonia pretreatment

The objective of this research is flotation separation of polycarbonate (PC) and acrylonitrile–butadiene–styrene (ABS) waste plastics combined with ammonia pretreatment. The PC and ABS plastics show similar hydrophobicity, and ammonia treatment changes selectively floatability of PC plastic while ABS is insensitive to ammonia treatment. The contact angle measurement indicates the dropping of flotation recovery of PC is ascribed to a decline of contact angle. X-ray photoelectron spectroscopy demonstrates reactions occur on PC surface, which makes PC surface more hydrophilic. Separation of PC and ABS waste plastics was conducted based on the flotation behavior of single plastic. At different temperatures, PC and ABS mixtures were separated efficiently through froth flotation with ammonia pretreatment for different time (13 min at 23 °C, 18 min at 18 °C and 30 min at 23 °C). For both PC and ABS, the purity and recovery is more than 95.31% and 95.35%, respectively; the purity of PC and ABS is up to 99.72% and 99.23%, respectively. PC and ABS mixtures with different particle sizes were separated effectively, implying that ammonia treatment possesses superior applicability.     

水处理中膜分离技术种类及特性研究

随着时代进步,科技发展,中国的环境问题尤其是水污染日益严重,而饮用水质量紧密关系着人们的健康,所以保证饮用水的水质安全,是给水厂重要的使命与责任.膜分离技术由于兼有分离、浓缩、纯化和精制的功能,又有高效、节能、环保、分子级过滤及过滤过程简单、易于控制等特征具有自身独特的优势.给水厂的常规处理工艺已然不能满足水质的要求,深度处理虽能大大提高水质,但是国内逐渐发展起来的超滤技术在去除水中致病微生物方面效果显著.简要介绍膜分离技术的种类及在给水处理中的应用.     

炉渣在锅炉湿法除尘废水处理中的应用

利用燃煤炉渣直接过滤处理锅炉湿法除尘废水 ,可以提高出水水质 ,对废水中 SS、CODcr和HSO4- 有显著去除效果 ,出水可以满足循环回用要求     

电渗析法处理低浓度乙酸废液的研究

用电渗析法处理配制的乙酸质量分类为２．５％左右的乙酸水溶液，浓缩液乙酸质量分数达到２０％，稀相出水乙酸质量分数至０．０２％；对影响处理过程的因素进行了探讨。     

细水雾幕衰减热辐射的数值模拟研究

针对现有防火分隔技术的不足,以细水雾幕作为新的防火分隔技术,开展了不同细水雾幕雾特性对衰减热辐射影响的数值模拟研究。通过建立长通道模型,在火源和被保护物体中间设置细水雾幕系统,测量有无细水雾幕及不同细水雾特性条件下被保护侧温度及热辐射强度值,来定性定量研究细水雾幕衰减热辐射的效率。模拟结果表明:细水雾幕可以很好的降低被保护侧空间的温度和热辐射强度;衰减热辐射效率随雾滴粒径的减小,喷雾流量的增大,喷头排数增加而增大;另外,其衰减热辐射效率与喷头布置方式有关,上喷方式明显优于下喷方式。研究结果将对现有防火分隔技术的改善提供帮助和技术支持。     

Gas separation using porous cement membrane

Gas separation is a key issue in various industrial fields. Hydrogen has the potential for application in clean fuel technologies. Therefore, the separation and purification of hydrogen is an important research subject. CO2 capture and storage have important roles in ＂green chemistry＂. As an effective clean technology, gas separation using inorganic membranes has attracted much attention in the last several decades. Membrane processes have many applications in the field of gas separation. Cement is one type of inorganic material, with the advantages of a lower cost and a longer lifespan. An experimental setup has been created and improved to measure twenty different cement membranes. The purpose of this work was to investigate the influence of gas molecule properties on the material transport and to explore the influence of operating conditions and membrane composition on separation efficiency. The influences of the above parameters are determined, the best conditions and membrane type are found, it is shown that cementitious material has the ability to separate gas mixtures, and the gas transport mechanism is studied.     

Identifying the Institutional Decision Process to Introduce Decentralized Sanitation in the City of Kunming (China)

We conducted a study of the institutional barriers to introducing urine source separation in the urban area of Kunming, China. On the basis of a stakeholder analysis, we constructed stakeholder diagrams showing the relative importance of decision-making power and (positive) interest in the topic. A hypothetical decision-making process for the urban case was derived based on a successful pilot project in a periurban area. All our results were evaluated by the stakeholders. We concluded that although a number of primary stakeholders have a large interest in testing urine source separation also in an urban context, most of the key stakeholders would be reluctant to this idea. However, the success in the periurban area showed that even a single, well-received pilot project can trigger the process of broad dissemination of new technologies. Whereas the institutional setting for such a pilot project is favorable in Kunming, a major challenge will be to adapt the technology to the demands of an urban population. Methodologically, we developed an approach to corroborate a stakeholder analysis with the perception of the stakeholders themselves. This is important not only in order to validate the analysis but also to bridge the theoretical gap between stakeholder analysis and stakeholder involvement. We also show that in disagreement with the assumption of most policy theories, local stakeholders consider informal decision pathways to be of great importance in actual policy-making.