Study of sorptive properties of trap systems for selective enrichment of volatile organic compounds from tobacco smoke samples

There is a dearth of data on the consumer product concentrations of iron, lead, and nickel for accurate comparison to be made. The levels of these elements were determined in 85 samples of six different classes of personal care products commonly used in Nigeria using atomic absorption spectrophotometry. The results of the analysis showed that the range of the mean concentrations of Fe was 0.485–1.108 ppm, Pb ND–0.163 ppm, and Ni ND-0.160 ppm. The analytical data have demonstrated that the selected consumer products are possible sources of iron, lead, and nickel exposure. Users can be exposed to these metals directly through dermal contact or inhalation. The regulations relating to cosmetic products give no limit values for heavy metals in cosmetic products, hence, it was difficult to establish if the values obtained in this study are safe or not. Prolonged use of soaps, creams, and detergent containing these elements may pose threat to human health and the environment. This could be responsible for various skin diseases such as allergic skin, follicular and pigmentary disorders, which are common among the users (exposed groups) of these products in Nigeria. A body of evidence has presented a rare example of systemic allergic dermatitis caused by topical application of a mercury-containing cosmetic to the upper lip of a 32-year-old Turkish patient.     

钙基CO_2吸收剂循环特性影响因素分析

利用小型固定床反应器研究了循环煅烧/碳酸化过程中,煅烧温度、煅烧气氛、碳酸化温度、压力等对钙基CO2吸收剂循环特性的影响,确定了影响钙基CO2吸收剂循环特性的主要因素。结果表明:随循环次数的增加,吸收剂的转化率明显下降,循环10次后,其基本都下降到20%左右;煅烧温度是影响吸收剂循环特性最重要的因素;煅烧气氛中存在CO2对吸收剂活性保持不利;吸收压力和温度也对吸收剂的循环特性有一定影响,较高的吸收压力和吸收温度有利于吸收剂转化。     

新型氨化菌丝体吸附剂的制备及吸附典型内分泌干扰物的研究

以产黄青霉(Penicillium chrysogenum)菌丝体为原料,通过2步化学反应将含有大量氨基的聚乙烯亚胺(PEI)嫁接到菌丝体表面,优化反应条件,得到最佳的氨化菌丝体吸附剂.该氨化吸附剂的等电点为pH 10.2,是一种表面带正电荷的菌丝体吸附剂,能有效吸附水中的阴离子内分泌干扰物五氯酚钠(PCP)、2,4二氯苯氧乙酸(2,4-D)和全氟辛烷磺酸钾(PFOS).3种污染物的吸附等温线符合Langmuir方程,15℃时最大吸附量分别为342.9、234.1、1725.6 mg/g.热力学计算表明,3种污染物的吸附均是自发发生的,2,4-D和PFOS的吸附是吸热反应,而PCP是放热反应.     

Effect of steam hydration on performance of lime sorbent for CO2 capture

Lime is considered a feasible sorbent for the capture of CO₂ from large stationary sources. The positive attributes of a natural source material, low cost and lack of harmful by-products are offset by rapid deterioration in performance and high regeneration temperature. Performance can be improved by hydrating the lime using steam. We investigate a steam hydration process wherein lime is hydrated for 5 min at 300 °C and atmospheric pressure in a mixture of steam and CO₂. The experiments consisted of 10 capture cycles with 60% of the lime active at the end. Extrapolation using a decay model suggests a residual carbonation level of 48%, significantly higher than the 8% achieved by dry lime cycles. The cost of replacement sorbent under these conditions is less than $1/t of CO₂ captured. The hydrated lime process also reduces the thermal load, for heating and cooling, by half as well as the inventory, and therefore solids handling, by a factor 5 over dry lime. The introduction of the hydration reaction provides another exothermic reaction for heat management.     

绿色木霉改性玉米秸秆溢油吸附剂的制备及其性能研究

利用绿色木霉对玉米秸秆进行固态发酵,通过单因素改性实验(改性时间、固液比和改性温度)制备溢油吸附剂TCS(Trichoderma viride modified corn stalk),并模拟溢油环境测定TCS的吸油量.研究表明,25℃下,改性6 d、固液比1∶4时,制得的TCS吸油量最大,达到13.84 g.g-1,相对原材料RCS(Raw corn stalk,吸油量为6.58 g.g-1)提高了110.33%.对RCS和TCS进行扫描电子显微镜(SEM)分析显示制得的TCS表面变得更加粗糙;傅里叶红外光谱分析(FT-IR)表明玉米秸秆纤维素组分被部分降解;X射线衍射分析(XRD)得到改性后的材料结晶度降低;纤维素、半纤维素和木质素等组分测定进一步表明生物改性降低了玉米秸秆中纤维素及半纤维素的含量,这些均说明改性后材料吸油量增加的原因.吸附动力学及保油性能测试表明,TCS具有快速的吸油速率,80 r.min-1条件下振荡1 h后即达到吸附平衡;且在吸附饱和后滴淌10 min仍能保持最初吸油量的74.87%,具有良好的保油性能.     

分级燃烧工况下高岭土对煤中微量元素排放的影响研究

通过在一维煤粉燃烧炉上进行肥煤、无烟煤添加高岭土吸附剂的燃烧实验 ,研究了肥煤、无烟煤及其燃烧产物中 18种微量元素的含量和分布 ;计算了高岭土在分级燃烧工况条件下对每种微量元素的吸附率 .结果表明 :高岭土对中、低挥发性微量元素具有不同的吸附作用 ,吸附效率与煤种、元素种类、燃烧温度等因素有关 ,无烟煤燃烧比肥煤燃烧吸附效果更好 .     

炉内喷钙脱硫的模拟

煤粉炉内喷钙脱硫是应用较为广泛的脱硫技术，运用逾渗理论建立氧化钙脱硫模型，用来模拟煤粉炉喷钙脱硫过程，并对脱硫影响因素：ＳＯ２浓度、温度、Ｃａ／Ｓ比等进行了研究，模拟计算显示了这些因素对脱硫效果的影响，其结果与试验数据相一致。通过该模型计算可以优化脱硫过程，对煤粉炉内喷钙脱硫有重要的指导意义。     

调质碳酸钙硫化机理的实验研究

对经Na2CO3溶解调质后石灰石煅烧、硫化特性进行了研究，发现调质后石灰石比未经调质石灰石具有更快的煅烧分解速率。CO2浓度变化对调质CaO硫化效果的影响程度要比未经调质CaO更为明显。调质CaO比调质前具有更高的最终钙转化率，但脱硫剂微观结构测定表明，调质CaO比表面积和孔隙率均小于同等条件下获得的未经调质CaO比表面积和孔隙率。利用X－衍射技术对CaO晶体结构进行了测定，对比晶格畸变度等参数并综合煅烧、硫化及脱硫剂孔特性，提出了调质CaO硫化反应机理为：前期为化学反应控制阶段，后期为离子扩散控制阶段。应用分形理论对CaO分形维数进行了计算，发现随CO2浓度的增加，无论调质与否得到的CaO，分形维数均呈下降趋势。     

廉价吸附剂处理重金属离子废水的研究进展

随着现代工业的迅速发展，生产过程中排出的有害重金属离子废水日益增加。寻找较为廉价的废水净化材料，对其中有害重金属离子的有效处理已成为环境保护中亟待解决的问题。廉价吸附剂的使用取代了目前成本较高的从溶液中回收重金属离子的方法，同时吸附剂改性会大大提高其吸附量。阐述了壳聚糖、海泡石、膨润土、海藻和泥炭等结构组成、吸附和离子交换性能等，报道廉价吸附剂对一些重金属离子的最大吸附量是：796mgPb／g壳聚糖，1123mgHg／g壳聚糖。92mgcr（Ⅲ）／g壳聚糖，76mgCr（Ⅲ）／g泥炭，41mgPb／g膨润土，558mgCd／g壳聚糖，215mgCd／g海藻。由此展现了廉价吸附剂在重金属离子废水处理过程中的巨大优势和良好的发展前景。     

交联壳聚糖吸附剂的制备及处理含铬废水的研究

探讨了交联壳聚糖吸附剂各成分的最优配比及处理含铬废水的最佳工艺条件。按最优配比制得的交联壳聚糖吸附剂处理总铬废水,在pH值3.5～4.5,接触时间8h,可使浓度为13.2mg/L的含铬废水中总铬的去除率高达99%以上。