漆酶改性玉米秸秆髓的制备及其吸油特性

采用绿色生物酶技术改性玉米秸秆髓（CSP）,在CSP表面由漆酶催化接枝十八胺,以提高材料的亲油疏水性能,制得高效吸油剂LCSP.研究了改性温度、改性时间、TEMPO浓度、漆酶用量及十八胺浓度等因素对LCSP亲油疏水性能的影响,同时采用SEM、BET、XRD、接触角、FTIR、XPS等分析技术对改性前后CSP理化特性进行表征,并进行了吸油研究.结果表明,在35℃下,投加100U/g的漆酶、4.48mmol/LTEMPO、8.91mmol/L十八胺,改性CSP6h,制得的材料吸油量最大、吸水量最小,油吸附量从13.24g/g提升至40.82g/g,水吸附量从13.76g/g降至3.83g/g.吸附过程符合准二级动力学模型,吸附剂的重复利用实验表明本方法制备的材料具有良好回收再利用能力.     

Determination of Cd,Cr, Cu,Pb and Zn from various water samples with use of FAAS techniques after the solid phase extraction on rice bran

A facile and novel method has been developed for the determination of cadmium, chromium, copper, lead, and zinc from various water samples using FAAS. In the present investigation, a syringe was loaded with sorbent (rice bran) for the separation and enrichment of cadmium, chromium, copper, lead, and zinc, prior to their analysis by flame atomic absorption spectrometry which was described to substitute the batch and column techniques. The syringe was loaded with 2.0 g of sorbent in order to retain the analyte elements. Six milliliter of sample solution (pH 8.0 ± 0.2) was drawn into the syringe in 15 s and discharged over a period of 15 s. Then, 2.0 M HCl eluent was drawn into the syringe and ejected back to desorb the analyte elements. At the optimum conditions, the percentage recoveries of Cd, Cr, Cu, Pb, and Zn was in the range of 95.5–99.4% with SD of 0.10%. The elements could be concentrated by drawing and discharging several portions of sample successively. The detailed study of various interferences made the confirmation of the method highly selective. The risk of contamination is less than that with the column technique. The method was successfully applied for the determination of Cd, Cr, Cu, Pb, and Zn in spiked and natural water samples. The results obtained are in good agreement with the reported methods at the 95% confidence level.     

改性氢氧化钙粉体的研制及其特性

介绍了作为氯气清除剂的粉体应具有的特性,并对粉体的研制方法进行了简单叙述。同时,对改性氢氧化钙粉体特性作了详细介绍。不难看出,研制的改性氢氧化钙粉体具有高度活性,与氯气捕消器配合使用,将成为氯气泄漏时的抢险措施     

炉内喷钙脱硫技术及其主要影响因素简述

本文介绍国外炉内喷钙脱硫技术的最新发展,综述影响脱硫效率的各种因素.简介芬兰Tampella有限公司开发的LIFAC技术和国外有关利用吸收剂再循环等方式提高脱硫率和钙利用率的研究结果,展望了炉内喷钙脱硫技术的发展前景.     

Formation of sulfur oxide groups by SO2 and their roles in mercury adsorption on carbon-based materials

The presence of SO₂ display significant effect on the mercury (Hg) adsorption ability of carbon-based sorbent. Yet the adsorption and oxidation of SO₂ on carbon with oxygen group, as well as the roles of different sulfur oxide groups in Hg adsorption have heretofore been unclear. The formation of sulfur oxide groups by SO₂ and their effects on Hg adsorption on carbon was detailed examined by the density functional theory. The results show that SO₂ can be oxidized into SO₃ by oxygen group on carbon surface. Both C-SO₂ and C-SO₃ can improve Hg adsorption on carbon site, while the promotive effect of C-SO₂ is stronger than C-SO₃. Electron density difference analyses reveal that sulfur oxide groups enhance the charge transfer ability of surface unsaturated carbon atom, thereby improving Hg adsorption. The experimental results confirm that surface active groups formed by SO₂ adsorption is more active for Hg adsorption than the groups generated by SO₃.     

新型铁铜锰复合氧化物颗粒吸附剂As(Ⅲ)吸附行为与机制研究

以壳聚糖为黏合剂,采用包覆法制备了一种新型除砷吸附剂——颗粒状铁铜锰复合氧化物(GFCM). GFCM吸附剂为不完全球状,直径0.7～1.0 mm,可以有效地将As(Ⅲ)氧化成As(V),并对形成的As(V)具有良好的吸附效果. GFCM对As(Ⅲ)的最大吸附容量(pH 7.0)为56.5 mg·g~(-1),显著优于目前已报道的多数颗粒状除砷吸附剂.溶液pH在5.0～9.0范围内, GFCM对As(Ⅲ)均有较好的吸附效果,离子强度则对砷吸附效果影响较小.共存阴离子对As(Ⅲ)吸附具有抑制作用,影响的大小顺序为:PO■ SiO■ CO■ Cl~- SO■.吸附As(Ⅲ)后的GFCM可用NaOH溶液进行有效脱附再生,可重复使用.在As(Ⅲ)的去除过程中,吸附剂中锰氧化物的主要作用是氧化As(Ⅲ),铁氧化物与铜氧化物的主要作用是吸附As(Ⅲ)与氧化形成的As(V),且铜氧化物有助于增强GFCM的砷吸附性能.     

钙基CO2吸收剂的锆改性研究

实验采用共沉淀法以Ca(Ac)2·H2O作为CaO前驱体,经NH3·H2O沉淀、静置、醇洗、烘干制备锆改性钙基高温二氧化碳吸收剂,并考察锆添加量、反应温度及时间、CO2分压等因素列其吸收性能的影响.经锆改性后,吸收剂中掺杂ZrO2形成了良好的介孔结构,可维持较高的碳酸化转化率,提高吸收剂的循环热稳定性.测试结果表明,当...     

中温烟气脱硫中蒸汽活化对钙基脱硫剂孔结构影响的实验研究

采用将脱硫剂搭载在多孔的玻璃棉上,避免了传统的流化过程所导致的脱硫剂的磨损和破碎.分析了蒸汽活化后脱硫剂孔隙结构的变化,证实了中温条件下蒸汽活化改善了孔的结构,增加了中孔的数量,并使脱硫剂发生明显的破碎,从而减弱了产物层的扩散阻力,使SO2和CaO的接触和反应变得有利.并证实了对脱硫反应贡献最大的是100～5000nm的中孔,而不是导致比表面积迅速增加的微孔,同时还发现,600℃时的脱硫反应比300℃情况下使脱硫剂产生更大量的破碎,导致更多的孔间隙.因此从物理结构上也解释了脱硫反应在600℃时的钙利用率要高于300℃时的情况.     

基于密相半干法脱硫工艺的生石灰消化及改性

以某公司生产的生石灰作为脱硫剂,密相半干法脱硫工艺在某炼铁厂烧结烟气脱硫工程的应用为例,对生石灰的消化反应和调质改性进行实验,考察其满足脱硫要求的最佳消化条件和烧结机头灰作为改性剂的比重。实验表明,当水灰比在1.5～1.7、生石灰粒径在200μm以下、消化温度在55℃左右、搅拌轴转速在15～25 r/min的范围内,可以保证生石灰有最佳的转化率,烧结机头灰占比重的5%时为最佳改性剂量;同时对实验的工程运行成本和脱硫效果进行分析,使用自制改性脱硫剂即可以节约运行成本和水电资源,又能提高脱硫效果,为脱硫设备的长期稳定运行提供了可靠依据。