有机溶剂中温法溶出光伏组件封装材料乙烯-醋酸乙烯酯

采用有机溶剂邻二氯苯中温法溶出模拟光伏组件的封装材料乙烯-醋酸乙烯酯(EVA),探究了不同条件下EVA的溶出率及模拟组件的分离率,通过正交实验确定了有机溶剂中温法处理EVA的最佳条件.实验结果表明,在反应温度160℃、固液比(光伏组件个数与邻二氯苯体积之比,个/mL)4:100、搅拌转速800 r/min、反应时间24...     

郑州园林绿化树木低温寒冻害空间分布特征研究

绿化树木是园林景观的主体部分,同样也是园林建设中的目标植物.然而,绿化植物容易受到低温寒冻害的影响,进而影响园林布局美观.基于此,该文提出郑州园林绿化树木低温寒冻害空间分布特征研究方法,统计郑州园林绿化树木类型,对各样本按照乔木层与灌木层进行分类整理,将频度、显著度、密度等作为计算树木多样性的指标,分析比较结果,根据获...     

水环境质量评价3种方法的应用对比

从众多水质评价方法中选取单项指数法、加权均值型指数法、模糊数学法进行介绍,并通过运用这3种方法对大汶河某年监测数据的平均值进行评价.经对比分析发现,加权均值型指数法是一种比较实用的水质评价方法,模糊数学法可以作为必要的补充.     

基于红外热成像的隧道火焰检测技术研究

精准的火焰检测是有效避免火灾发生的关键,针对传统的火灾探测算法在公路隧道等大空间环境中存在及时性与准确性相互制约的问题,通过研究隧道火焰初期在图像中呈现的静态和动态特征,提出了一种基于红外热成像的公路隧道火灾初期火焰检测方法。利用温度阈值获取疑似火焰区域,根据红外图像在引导滤波器作用下降噪,同时利用区域增长法分割疑似火焰区域;从疑似区域中提取的特征值构成特征向量,进行数据归一化提高SVM收敛速度;利用人工蜂群算法优化参数。结果表明：ABC-SVM能够实现公路隧道火灾初期的火焰识别,检测正确率相较于RBF方法提升了2.26%,运行时间缩短了2.29 ms;检测正确率相较于SVM方法提升了0.87%,运行时间缩短了2.22 ms。本方法可以对初期隧道火灾进行快速、有效检测,并有良好的环境适用性。     

基于无人机多传感吊舱系统的火点实时定位方法

林火定位是林火智能监测设备的核心技术。提出了一种基于激光雷达、红外热像仪及组合惯导多数据融合的火点定位方法。首先设计了一个通用的无人机吊舱系统,并基于ROS框架实现数据采集、数据处理和数据传输等功能;其次提出了一个基于无人机吊舱系统的火点全局定位方案,根据红外热像仪成像特性识别火点,同时将密集点云与红外图像进行数据融合,估计出火点的三维空间位置;然后根据无人机位姿提出了一种基于墨卡托投影的火点全局定位方案,得到了火点的GPS位置。最后通过试验得到了该方案的全局定位精度：在实验中经度最大误差为2.36×10^-5°,纬度最大误差为1.84×10^-5°,高程最大误差为0.926 1 m,为其他林火定位方案提供了技术支持。     

Improvement of an efficient separation method for chemicals in diesel exhaust particles: analysis for nitrophenols

GOAL, SCOPE, AND BACKGROUND: Diesel exhaust is believed to consist of thousands of organic constituents and is a major cause of urban pollution. We recently reported that a systematic separation procedure involving successive solvent extractions, followed by repeated column chromatography, resulted in the isolation of vasodilatory active nitrophenols. These findings indicated that the estimation of the amount of nitrophenols in the environment is important to evaluate their effect on human health. The isolation procedure, however, involved successive solvent extractions followed by tedious, repeated chromatography, resulting in poor fractionation and in a significant loss of accuracy and reliability. Therefore, it was crucial to develop an alternative, efficient, and reliable analytical method. Here, we describe a facile and efficient acid-base extraction procedure for the analysis of nitrophenols. MATERIALS AND METHODS: Diesel exhaust particles (DEP) were collected from the exhaust of a 4JB1-type engine (ISUZU Automobile Co., Tokyo, Japan). Gas chromatography-mass spectrometry (GC-MS) analysis was performed with a GCMS-QP2010 instrument (Shimadzu, Kyoto, Japan). RESULTS: A solution of DEP in 1-butanol was extracted with aqueous NaOH to afford a nitrophenol-rich oily extract. The resulting oil was methylated with trimethylsilyldiazomethane and subsequently subjected to GC-MS analysis, revealing that 4-nitrophenol, 3-methyl-4-nitrophenol, 2-methyl-4-nitrophenol, and 4-nitro-3-phenylphenol were present in significantly higher concentrations than those reported previously. DISCUSSION: Simple acid-base extraction followed by the direct analysis of the resulting extract by GC-MS gave only broad peaks of nitrophenols with a poor detection limit, while the GC-MS analysis of the sample pretreated with (trimethylsilyl)diazomethane gave satisfactorily clear chromatograms with sharp peaks and with a significantly lowered detection limit (0.5 ng/ml, approximately 100 times). CONCLUSION: The present method involving an acid-base extraction, in situ derivatization, and GC-MS analysis has shown to be a simple, efficient, and reliable method for the isolation and identification of the chemical substances in DEP.     

碱熔融法合成NaA和NaX型粉煤灰沸石的品质表征

以粉煤灰为原料采用碱熔融法合成了2种单一沸石矿物种的NaA和NaX型沸石,并对产物的结构、性能和应用指标进行了详细表征.经x射线衍射和IR光谱分析,表明合成产物是无杂晶生成的NaA和NaX型沸石相;在扫描电镜观察下,产物分别具有NaA和NaX型沸石的立方体和八面体晶体骨架结构.DTA分析表明了合成产物中沸石水的存在,且产物热稳定性较好.通过对比,粉煤灰合成的NaA和NaX型沸石的比表面积达到了相应商品沸石的66.9%和83.6%;孔容为41.1%和70.2%;阳离子交换容量(CEC,cation exchange capacity)为82.93%和84.31%.通过比较化学组成表明,大规模应用合成产物不会对环境造成危害.     

面向灾害应用的遥感影像融合统一理论体系设计

由于缺乏统一的理论体系指导,目前遥感影像融合研究相对比较混乱。针对像素级融合统一理论框架的思想,指出了遥感影像融合研究的方向和思路,将像素级融合统一理论框架逐步向特征级和决策级推广,着重发展了一套遥感影像融合统一理论体系。在统一体系下,面向灾害监测应用,按照理论研究、方法研究和应用研究的3个层次进行该理论体系的设计。     

抑制斑点噪声的SAR与多光谱图像融合方法

通过将主成分变换与IHS变换相结合,避免了会导致SAR信息量损失的滤波过程,实现了一种可降低SAR斑点噪声影响的遥感影像融合算法。与主成分变换融合方法、IHS变换融合方法在主观视觉效果分析和客观统计参数两方面进行比较,新方法不仅很好地保留了多光谱影像的光谱信息,增强了结果影像的空间细节表现能力,而且有效地抑制了SAR斑点噪声,提高了结果影像的信息量与清晰度。     

Extended geometric method: a simple approach to derive adsorption rate constants of Langmuir-Freundlich kinetics

A new and simple equation has been presented here for calculation of adsorption and desorption rate constants of Langmuir-Freundlich kinetic equation. The derivation of new equation is on the basis of extension and correction to the geometric method which has been presented by Kuan et al. [Kuan, W.-H., Lo, S.-L., Chang, C.M., Wang, M.K., 2000. A geometric approach to determine adsorption and desorption kinetic constants. Chemosphere 41, 1741-1747] for the kinetics of adsorption/desorption in aqueous solutions. The correction is to consider that the concentration of solute is not constant and changes as adsorption proceeds. The extension is that we applied Langmuir-Freundlich kinetic model instead of Langmuir kinetic model to consider the heterogeneity and therefore it is more applicable to the real systems. For solving Langmuir-Freundlich kinetic model, some geometric methods and also Taylor expansion were used and finally a simple and novel equation was derived (Eq. (20)) for calculation of adsorption rate constant. This new method was named "extended geometric method". The input data of the obtained equation can be simply derived from initial data of adsorption kinetics. Finally the adsorption of methyl orange onto granular activated carbon was carried out at dynamic and equilibrium conditions and the capabilities of extended geometric method were examined by the experimental data.