人工湿地系统处理污水新模式的探讨

本文简述了污水处理方法的概况，全面论述了人工湿地系统这一处理污水新模式的发展、工艺、基本原理。提出了设计的一般过程，结合实例说明了该系统投资省、运行费用低以及良好效果。通过总结该系统的一般特征，展示了该系统在处理污水方面具有广泛的应用前景。     

高速微涡活性污泥法提高氧利用效率的研究

概述了高速微涡活性污泥法的工艺特点，并对该法提高氧的转移及利用效率进行了研究和机理分析。     

水葱修复土壤镉污染潜力的研究

野外观察与研究发现水葱(Scirpus tabernaemontani G.)可以耐受土壤中高浓度的重金属污染,并对镉(Cd)有很高的生物富集量.实验室水培试验研究了两个主要因素,营养液pH与Cd含量,对水葱生物量以及Cd富集效果的影响.结果表明,它可耐受高浓度Cd (30 mg/L)和大范围pH变化 (3.7～7.7).当营养液pH为4.7, Cd为25 mg/L时,水葱富集的Cd达到最大值:地上部分264.71 mg/kg,地下部分234.39 mg/kg,平均转运系数1.13.这显示了它用于植物修复Cd污染土壤的潜力.     

基于第二次全国污染源普查质量保证的思考及体系建设初探

通过对清查数据的结果分析,确定第二次全国污染源入户普查的对象,基于企业填报、现场入户、资料收集审核、数据核查等具体工作的实施与开展,思考和归总普查工作中影响数据质量的现实问题和难点,初步构建污染源普查质量保证体系,以期为全国污染源普查数据质量保证提供有益参考。     

Time allocation between work and recreation and the associated injury risks among young people

PROBLEM: The purpose of this study was to examine the relationship between overall risk of injury and time use patterns between work and active recreation among adolescents and young adults. METHODS: Using a representative sample of 9,795 Canadians aged 15-24 years, a multivariate logistic regression on the likelihood of any medically attended injury was conducted, including sociodemographic, individual, and time factors. RESULTS: Young people who engaged in a combination of high work and high activity hours were twice as likely to sustain a medically attended injury compared to those who worked low hours, but did not participate in any recreational activity. Those respondents who were not in school had a 43% increase in injury risk compared to full-time students. SUMMARY: Our findings suggest that injury risk was not a simple function of fatigue and cumulative exposure time. Our findings suggest the importance of considering time use and the associated injury risk tradeoffs. IMPACT ON INDUSTRY: Relevant to state and federal work safety policy makers, our findings suggest the importance of understanding where youth might otherwise spend their time if constraint were placed on their employment opportunities, and the associated injury risk tradeoffs must be taken into consideration.     

酸碱改性活性炭吸附微污染水源水中的Ni2+

通过HNO3-KOH对活性炭进行改性,采用扫面电镜（SEM）、比表面积分析（BET）、红外光谱分析（FT-IR）和Boehm滴定法对改性前后的活性炭进行表征,研究了改性前后的活性炭在不同条件下对微污染水源水中Ni2+的吸附能力和动力学。结果表明：改性活性炭表面含氧酸性官能团数量增加,比表面积和总孔容均略有降低,孔径变化不明显。在Ni2+浓度为0.4 mg·L-1,改性活性炭投加量5.0 g·L-1,温度30 ℃时,反应1 h去除率可达95.55%,剩余Ni2+浓度为0.017 8 mg·L-1,达到《生活饮用水卫生标准》（GB5749-2006）中的要求。相同条件下,改性前活性炭对Ni2+的去除率仅为74.45%,剩余Ni2+浓度达不到标准要求。活性炭对Ni2+的等温吸附更符合Langmuir方程,吸附动力学数据符合准二级动力学方程。     

SBR法短程硝化处理纤维素乙醇废水的中试研究

针对纤维素产乙醇废水高有机物、高氨氮、难降解的特点,运用短程硝化反硝化脱氮工艺,基于序批式活性污泥反应器（SBR）的调试运行,研究反应器运行方式对COD去除和脱氮效能的影响,为日后纤维素乙醇废水处理的工程化提供借鉴。结果表明：通过控制DO（0.5 mg·L-1）、pH（7.6~8.5）和投加碳源等条件,可实现亚硝酸盐氮的积累和转化,最终三氮去除率稳定在70%以上;通过投加不同碳源对比实验,发现乙酸钠作为反硝化外加碳源比葡萄糖具有更高的效率;厌氧工艺处理过的纤维素乙醇废水经短程硝化反硝化工艺处理后,COD去除率维持在20%上下,表明废水可生化性极低,已不适应生物法处理,须利用化学氧化法才能进一步去除;通过周期实验,发现硝化阶段碱度过量对短程硝化进程影响并不明显,相反充足的碱度是保证硝化反应进行的必要条件。     

忻州市大气PM2.5的化学组成质量平衡特征及来源解析

于2013年9月（非采暖季）、2014年2-3月（采暖季）、2014年5月（风沙季）采集忻州市3个监测点（新城区、开发区和旧城区）的PM2.5样品,分析其中的39种元素、9种水溶性离子及2种碳组分,并对PM2.5的质量浓度进行重构。结果表明,重构后的化学组分分为5类：矿物尘、微量元素、有机物、元素碳和二次粒子,其中矿物尘、二次粒子及有机物是忻州PM2.5的主要组成,分别占到ρ（PM2.5）的24.0%~36.2%、19.2%~32.6%和12.9%~25.7%;化学组成质量分数具有较明显的季节变化特征,风沙季矿物尘质量分数高于采暖季和非采暖季,采暖季有机物质量分数高于其他两季,非采暖季二次粒子质量分数略高于其他两季;化学组分的空间变化显示会展中心站点的二次粒子和矿物尘质量分数明显高于其他2个站点。应用化学质量平衡（CMB）模型进行来源解析,结果显示忻州市PM2.5的主要来源是扬尘（21%~35%）、二次粒子（25%~26%）和机动车尾气（21%~26%）。     

基于SWAT模型的流域面源污染模拟影响分析

针对流域面源污染模型往往忽略或简化河道内污染物变化过程的缺陷,探讨了河道水质模型对流域面源污染模拟的影响.以太湖流域浙西区的西苕溪流域为研究对象,选取具有一定物理机制的分布式面源污染模型SWAT模型,分别以激活和不激活其嵌套的河道水质模型QUAL2E,即SWAT模型与QUAL2E模型紧密耦合和松散耦合两种情况进行模拟,并比较了对TN及TP的模拟效果.结果表明,丰水期与平水期的模拟结果并没有显著差别;但在枯水期,由于水量较小,河道内污染物变化过程对模拟结果影响较大.同时引入QUAL2K模型,分析认为改进河道水质模型对提高SWAT模型模拟精度有一定的效果.     

Field monitoring of volatile organic compounds using passive air samplers in an industrial city in Japan

Highly portable, sensitive, and selective passive air samplers were used to investigate ambient volatile organic compound (VOC) levels at multiple sampling sites in an industrial city, Fuji, Japan. We determined the spatial distributions of 27 species of VOCs in three campaigns: Mar (cold season), May (warm season), and Nov (mild season) of 2004. In all campaigns, toluene (geometric mean concentration, 14.0microg/m3) was the most abundant VOC, followed by acetaldehyde (4.76microg/m3), and formaldehyde (2.58microg/m3). The spatial distributions for certain VOCs showed characteristic patterns: high concentrations of benzene and formaldehyde were typically found along major roads, whereas high concentrations of toluene and tetrachloroethylene (PCE) were usually found near factories. The spatial distribution of PCE observed was extremely consistent with the diffusion pattern calculated from Pollutant Release and Transfer Register data and meteorological data, indicated that passive air samplers are useful for determining the sources and distributions of ambient VOCs.