高效液相色谱法检测与化感现象相关的5种酚酸

建立了香草酸、对羟基苯甲酸、丁香酸、香豆酸和阿魏酸等5种酚酸的高效液相色谱测定方法,利用本方法在土壤溶液和残茬腐解产物中进行5种酚酸的检测,结果表明,大豆生长一段时间后,在灭菌土壤中、未灭菌土壤中和不同茬口的土壤中,均检测到丁香酸,在残茬腐解产物中检测到香草酸、丁香酸、香豆酸和阿魏酸。     

养分(磷)吸收机理模型的应用研究──Ⅱ.模型参数的敏感性分析

采用Claassen的养分吸收机理模型探讨了玉米与大豆幼苗磷吸收过程中的参数敏感性,结果表明：在一般土壤与施肥条件下,玉米与大豆幼苗吸收磷的高度敏感性参数或重要限制因素为根系伸长速率与根半径;在相同土壤供磷条件下,供试大豆幼苗根系的磷摄取能力远低于玉米幼苗根系的磷摄取能力,其原因归结于两者在根系最大养分流Imax与根系伸长速率K两个敏感性参数上的差异;玉米与大豆幼苗磷吸收过程中三种根毛参数的敏感性均较低,这主要与土壤供磷水平较高有关;土壤含水量在玉米幼苗磷吸收过程中表现了极高的敏感性,当土壤含水量降低时,土壤养分供应参数对玉米幼苗磷吸收的敏感性与限制作用均增大。     

不同改良措施对煤矸石污染土壤上大豆生长的影响

采用盆栽试验,通过添加粉煤灰和牛粪对煤矸石污染土壤进行改良,并研究了不同改良措施对大豆生长、光合特性和产量的影响。结果表明,添加粉煤灰0.07 kg.kg-1(T1)、添加牛粪0.07 kg.kg-1(T2)、添加粉煤灰和牛粪各0.07 kg.kg-1(T3)3种土壤改良措施对大豆的株高、叶面积和单株根瘤数均有显著影响,不同生育期株高、叶面积和单株根瘤数均表现为T3>T2>T1>CK。在花期和鼓粒期,3种土壤改良措施下大豆的叶绿素含量和光合速率均显著高于对照,且T3处理显著高于T2和T1。与对照相比,不同土壤改良措施对大豆的单株荚数、百粒重、单株粒重和产量均有显著影响,T3、T2和T1处理的大豆产量较对照分别提高68.47%、40.99%和30.63%。     

铀胁迫对大豆与玉米幼苗细胞DNA损伤的彗星试验研究

以铀浓度为1000 μmol·L-1、800 μmol·L-1、600 μmol·L-1、400 μmol·L-1、200μmol·L-1和100μmol·L-1的6组铀溶液和对照组(0μmol·L-1)培养大豆和玉米幼苗,采用彗星试验研究铀胁迫对大豆和玉米幼苗细胞DNA的损伤情况.试验结果表明,铀浓度为1 000 μ...     

氚化水(HTO)气态释放后在大豆中的积累和转化研究

为了研究气态氚化水(Tritiated water,HTO)事故释放情况下其在植物中的迁移转化情况,选取盆栽大豆作为研究对象,分别在苗期、花荚期、灌浆期和成熟期模拟气态氚化水短期释放1 h,分不同时期采集样品测量大豆叶片和籽粒中的组织自由水氚(Tissue free water tritium,TFWT)和有机氚(Organically bound tritium,OBT)浓度,研究了TFWT和OBT的变化情况.结果表明,如果暴露试验在苗期和成熟期进行,叶片中的TFWT与周围空气中氚化水达到平衡的时间大于1 h,而花荚期和灌浆期则小于1 h.总的来说,随着时间的推移,大豆叶片和籽粒中的TFWT和OBT均呈现降低的趋势,与暴露试验结束后相比,差异达极显著水平.4个不同生育期进行暴露试验,收获时叶片中TFWT浓度分别为暴露试验结束时的 0.122%、0.0234%、0.0948%和75.87%,OBT的浓度分别为暴露试验结束时的 2.47%、4.32%、3.67%和31.68%;花荚期、灌浆期和成熟期进行暴露试验收获时籽粒中TFWT的浓度与暴露试验结束时TFWT的浓度相差倍数分别为6486、7902和4,OBT的浓度分别为暴露试验结束时的31.48%、32.03%和116.73%.4个不同生育期进行暴露试验,收获时大豆籽粒中的OBT与TFWT的浓度比率分别为5、9、34和0.4,说明摄入剂量中OBT的贡献大于TFWT,但气态氚化水在大豆成熟期释放,TFWT在摄入剂量的贡献中要大于OBT.因此,在植物氚浓度预测模型中,应根据气态氚化水事故释放时植物所处的不同生育期确定相应的参数,这样才能更为准确和客观的评价氚的摄入剂量.     

Gear oil formulation designed to meet bio-preferred criteria as well as give high performance

A bio-based gear oil was developed from soybean oil (SBO). The SBO was first thermally polymerised and then mixed with additives and diluents. The effect of pour point depressants, co-base oils, antioxidants and anti-wear additives is reported. Lubricity, viscosity index and oxidation stability of the final formulation of the bio-based gear oil are compared with commercially available gear oils. The final formulation of bio-based gear oil gives test results: viscosity index 165, four-ball wear scar 0.375 mm. These numbers are comparable to or better than the commercially available gear oils tested for comparison. The oxidation onset temperature of the bio-based gear oil, 220°C, is lower than the evaluated commercial products, but still at an acceptable range for gear oil.     

Polyols and Polyurethanes from Hydroformylation of Soybean Oil

This paper compares physical and mechanical properties of polyurethanes derived via the hydroformylation approach and is a part of our study on the structure–property relationships in polyurethanes created from vegetable oils. The double bonds of soybean oil are first converted to aldehydes through hydroformylation using either rhodium or cobalt as the catalyst. The aldehydes are hydrogenated by Raney nickel to alcohols, forming a triglyceride polyol. The latter is reacted with polymeric MDI to yield the polyurethane. Depending on the degree of conversion, the materials can behave as hard rubbers or rigid plastics. The rhodium-catalyzed reaction afforded a polyol with a 95% conversion, giving rise to a rigid polyurethane, while the cobalt-catalyzed reaction gives a polyol with a 67% conversion, leading to a hard rubber having lower mechanical strengths. Addition of glycerine as a cross-linker systematically improves the properties of the polyurethanes. The polyols are characterized by DSC. The measured properties of polyurethanes include glass transition temperatures, tensile strengths, flexural moduli, and impact strengths.     

曝气时间对模拟豆制品废水处理效果影响

大豆营养丰富,保健功能强,其蛋白质含量高达36%以上,而胆固醇含量极低,因此已成为人们摄取植物性蛋白的主要来源之一。为了提高国民素质,根据《中国食物结构改革与发展纲要》,中国己于1996年9月正式启动了大豆行动计划,发展大豆生产,积极引导消费,鼓励国民特别是中小学生饮用豆奶,食用豆制品。随着大豆计划的实施,豆制品生产的供与求将越来越大,相应地其废水排放量也越来越大,因此豆制品废水的处理显得十分紧迫[1-4],采用厌氧好氧法处理模拟豆制品废水,考察曝气时间对厌氧处理后废水处理效果的影响。实验结果表明:进水COD为420 mg/L～580 mg/L,对废水中的COD、NH4+-N、PO34--P有较好的去除能力。该系统运行稳定,工艺可行。     

SBR法处理豆制品废水工艺条件的研究

用SBR法处理豆制品废水的试验表明，该系统具有较好的抗负荷冲击能力，进水COD在300—2000mg／L之间变化，对系统不造成任何影响；考察了曝气时间、曝气量和污泥浓度等对去除效果的影响，试验结果表明，曝气时间和曝气量对处理效果影响很大。确定该反应系统最佳曝气时间是8h，适宜的曝气量是800L／h，而污泥浓度控制在4000mg／L左右时，处理效率最高，采用进水顶出水的排水方式是可行的，确定系统的最佳排水比是3／5。厌氧段的插入可以减少剩余污泥的产量。     

Characteristics for the hybrid cell Foaz obtained from the  protoplast fusion between yeast and photosynthetic bacteria in soybean processing wastewater

The optimal pH and temperature, maximum specific degradation rate, half rate constant and flocculation rate for the hybrid cell Foaz were measured in the reaction for the degradation of soybean processing wastewater(SPW) in this study. The optimal pH and temperature for Foaz in SPW were the same as those of its parental strains Saccharomyces cerevisiae Y9407 and Rhodobacter sphaeroides P9479, but the flocculation rate, the maximum specific degradation rate and the half rate constant for Foaz were higher than those of its parental strains. The results suggest that the characteristics of the inter kingdom fusant Foaz constructed from the protoplast fusion between the eukaryote cell yeast S.cerevisiae and the prokaryote cell photosynthetic bacteriaR. sphaeroides may favor degrading organic pollutant in SPW and removing biomass from the effluent.