Hexabromocyclododecanes in limnic and marine organisms and terrestrial plants from Tianjin,China: Diastereomer- and enantiomer-specific profiles,biomagnification, and human exposure

To interpret the distribution of hexabromocyclododecanes (HBCDs) in various organisms, we measured the concentrations and diastereomer and enantiomer profiles of HBCDs in 21 different species of limnic and marine cohorts from Tianjin, China. The concentration ranges of HBCDs in limnic and marine organisms were 64.3–1111 ng g⁻¹ lw and 85.5–989 ng g⁻¹ lw, respectively. Living habitat and feeding habits had important impacts on HBCD diastereomer distribution. Most of the species appeared to preferentially select (+)-α-, (−)-β- and (−)-γ-HBCD. There is a tendency that the total and α-HBCDs were magnified as trophic level increased with trophic magnification factors (TMFs) around 2. The concentrations of HBCDs in the limnic and marine fishes were highest in the liver, followed by the gill, skin, and muscle. In terrestrial plants, the highest concentrations of HBCDs were observed in the leaf, followed by the root and the rhizosphere soil. Plants showed enantioselectivity for HBCD enantiomers, which varied with plant species and organs (leaf vs. root) of the same plant. Higher estimated daily intakes (EDIs) of HBCDs were observed from fish than from wheat.     

Swine wastewater treatment in a two stage sequencing batch reactor using real‐time control

Abstract

A laboratory scale two‐stage sequencing batch reactor (TSSBR) was used to study the effectiveness of pH as a real‐time control parameter in swine wastewater treatment. A Ringlace media was inserted into the A/O (Anoxic/Oxic) reactor for bacteria immobilization. The TSSBR was subjected to three levels of organic loading. The pH and ORP (Oxidation Reduction Potential) patterns obtained were consistent with distinct features, enabling the real‐time control strategy to effectively set a flexible aeration time pending on influent concentration, hence resulting in flexible cycle time and HRT (Hydraulic Retention Time) for the system. The real‐time process ensured a removal efficiency of over 99% and 95%, respectively, for ammonia and TOC (Total Organic Carbon). For NO₃ ^‐‐N and PO₄ ^‐3, the run with influent TOC = 4,000 mg/L yielded the most efficient removal of 61% and 95%, respectively. Test results suggest that pH can be a viable tool for on‐line real‐time control of a biological treatment process.     

Growth and Foliar Nitrogen Status of Four Plant Species Exposed to Atmospheric Ammonia

A chamber study was conducted to evaluate the growth response and leaf nitrogen (N) status of four plant species exposed to continuous ammonia (NH₃) for 12 weeks (wk). This was intended to evaluate appropriate plant species that could be used to trap discharged NH₃ from the exhaust fans in poultry feeding operations before moving off-site. Two hundred and forty bare-root plants of four species (Juniperus virginiana (red cedar), Gleditsia triacanthos var. inermis (thornless honey locust), Populus sp. (hybrid poplar), and Phalaris arundinacea (reed canary grass) were transplanted into 4- or 8-L polyethylene pots and grown in four environmentally controlled chambers. Plants placed in two of the four chambers received continuous exposure to anhydrous NH₃ at 4 to 5 ppm while plants in another two chambers received no NH₃. In each of the four chambers, 2 to 4 plants per species received no fertilizer while the rest of the plants were fertilized with a 100 ppm solution containing 21% N, 7% phosphorus, and 7% potassium. The results showed that honey locust was the fastest-growing species. The superior growth of honey locust among all species was also supported by its total biomass, root, and root dry matter (DM) weights. For all species there was a trend for plants exposed to NH₃ to have greater leaf DM than their non-exposed counterparts at 6 (43.0 vs. 30.8%; P = 0.09) and 12 wk (47.9 vs. 36.6%; P = 0.07), and significantly greater (P ≤ 0.05) leaf N content at 6 (6.44 vs. 3.67%) and 12 wk (7.05 vs. 3.51%) when exposed to NH₃. Numerically greater leaf DM due to NH₃ exposure was also consistently measured in poplar at both sampling periods. Hybrid poplar, as well as honey locust and reed canary grass, deposited 1.5 to 2-fold greater N in their leaves than red cedar tissues as a result of NH₃ exposure compared to non-exposed plants. Regardless of the effect of NH₃ on foliar color and damage score of the plants, the increase of foliar N content (g 100 g^?1 of fresh foliage weight) after NH₃ exposure at 6 and 12 wk was 0.45 and 0.87 for grass,1.25 and 1.34 for locust, and 2.67 and 6.09 for poplar. However, only honey locust likely benefited from ambient NH₃ as indicated by its consistent leaf color quality and lower damage score, compared with other species that were adversely affected by atmospheric NH₃.     

The conversion of chicken manure to biooil by fast pyrolysis I. Analyses of chicken manure,biooils and char by 13C and 1H NMR and FTIR spectrophotometry

Fast pyrolysis of chicken manure produced two biooils (Fractions I and II) and a residual char. All four materials were analyzed by chemical methods, ¹³C and 1H Nuclear Magnetic Resonance Spectrometry (¹³C and 1H NMR), and Fourier Transform Infrared Spectrosphotometry (FTIR). The char showed the highest C content and the highest aromaticity. Of the two biooils Fraction II was higher in C, yield and calorific value but lower in N than Fraction I. The S and ash content of the two biooil fractions were low. The Cross Polarization Magic Angle Spinning (CP-MAS) ¹³C NMR spectrum of the initial chicken manure showed it to be rich in cellulose, which was a major component of sawdust used as bedding material. Nuclear Magnetic Resonance (NMR) spectra of the two biooils indicated that Fraction I was less aromatic than Fraction II. Among the aromatics in the two biooils, we were able to tentatively identify N-heterocyclics like indoles, pyridines, and pyrazines. FTIR spectra were generally in agreement with the NMR data. FTIR spectra of both biooils showed the presence of both primary and secondary amides and primary amines as well as N-heterocyclics such as pyridines, quinolines, and pyrimidines. The FTIR spectrum of the char resembled that of the initial chicken manure except that the concentration of carbohydrates was lower.     

A full-scale sequencing batch reactor system for swine wastewater treatment

A full-scale sequencing batch reactor (SBR) system was evaluated for its ability to remove carbon and nitrogen from swine wastewater. The SBR was operated on four, six-hour cycles each day, with each cycle consisting of 4.5 hours of “React,” 0.75 hours of “Settling”, 0.75 hours for “Draw” and “Fill.” Within each cycle, an amount of wastewater equivalent to about 5% of the reactor volume (5,500 litres) was removed and added. The SBR system was able to remove 82% of biochemical oxygen demand (BOD) and more than 75% of nitrogen. Even though the SBR effluent, with an average effluent BOD₅ of about 588 mg L^{? 1}, did not meet the discharge criteria, it enabled a reduction of the land base required for land application of swine wastewater by about 75%. Results indicated that the SBR system was a viable method for the treatment of swine wastewater.     

Acetaldehyde residue in polyethylene terephthalate (PET) bottles

A simple sample preparation technique was developed for rapid analysis of acetaldehyde residue in Polyethylene Terephthalate (PET) bottles. A laboratory-built heating system was used and coupled with gas chromatography-flame ionization detector (GC-FID) at optimized conditions. The results were a tremendous reduction of the sample preparation time from 24 hours, for the conventional method, to only one hour. The analysis took only 1.5 min with other good analytical performances i.e. a low detection limit, 0.3 ng mL^{? 1} and a wide linear dynamic range, 0.3 ng mL^{? 1} to 6.6 μ g mL^{? 1} with R² > 0.99.Acetaldehyde residue in freshly blown bottles were analyzed and found in the range of 0.4 to 1.1 ng mL^{? 1}. The results were good agreement with the conventional 24-hour airspace method (P < 0.01). The PET-bottle sampling technique was also developed to minimize the complication of sample transportation and pre-concentration. A purge and trap technique was found to be the most suitable. Then, it was implemented and compared, the results showed no significant difference (P < 0.01) with and without purge and trap.     

Dust Storms are an Indication of an Unhealthy Environment in East Asia

Dust storms frequently occur in Mongolia and in northern China. Each year there are 30 to 120 dusty days in source regions of Mongolia and 14–20 dusty days on the Korean Peninsula. Intense sand storms and associated dust falls produce environmental impacts in East Asia. This paper discusses the environmental degradation in Mongolia and the social, economic and atmospheric impacts of dust storms in the sink area. The impact of dust storms on environmental compartments as well as their direct and indirect consequences to basic resources like water and energy demand and supply is explained. Governments are encouraged to take appropriate action in specified regions. For monitoring dust storms there is a need for international cooperation to combat growing environmental and human security concerns.     

Spatial Characterization and Prioritization of Heavy Metal Contaminated Soil-Water Resources in Peri-Urban Areas of National Capital Territory (NCT), Delhi

Due to rapid industrialization and urbanization during last two decades, contamination of soils by heavy metals is on an increase globally. Lands under peri-urban agriculture are the worst affected. In NCT, Delhi about 14.4% of land area is chemically degraded. In order to take care of this problem, recently the Supreme Court of India ordered to shift various non-confirming (about 39,000 units) industries to regions outside NCT, Delhi. However in spite of this, there have been several reports and parliamentary debates on the phyto-toxicity and extensive accumulation of heavy metals in the region. Literature review revealed that the basis of these debates is a few studies on some point locations in/around Delhi. It was further observed that information on the distribution and extent of heavy metal pollution problem in the region was completely missing. The present study was thus basically aimed at assessing the spatial distribution/extent and type of heavy metal pollution in the study area, for enabling future designing of appropriate site-specific management measures by the decision makers.For this, detailed spatial information on bio-available heavy metal concentrations in the soils and surface/sub-surface waters of NCT (Delhi) was generated through actual soil/water surveys, standard laboratory methods and GIS techniques. The study showed that concentration of all micronutrients (viz. Zn: 0.05–0.18 ppm; Cu: in traces; Fe: 0–0.5 ppm; and Mn: 0–1.2 ppm) and most heavy metals (viz. Ni: 0–0.7 ppm; Pb: 0–0.15 ppm and Cd: in traces) in the surface/sub-surface irrigation waters were well within permissible limits. However Cr concentrations in irrigation waters of Alipur and Shahdara blocks were far above their maximum permissible limit of 1 ppm. It was further observed that Ni and Cr concentrations in the drinking waters of almost entire test area were far above maximum permissible levels of 0.02 and 0.01 ppm, respectively. Bio-available concentrations of several heavy metals (viz. Pb: 0.1–2 ppm; Cd: traces; Ni: 0.05–2 ppm and Cr: 0–0.4 ppm) in the study area soils were also observed to be well within the maximum permissible limits. However there were point Cu contaminations (5–10 ppm) in the sewage-sludge amended soils of vegetable growing areas near south Shahdara block. This was attributed to increased Cu availability due to oxidized acidic conditions generated by over-irrigation of agricultural lands. Available Mn concentrations in Kanjhawala, western Najafgarh and Alipur soils were also observed to be above maximum permissible limit of 10 ppm. This was observed to be mainly due to the geology (i.e. presence of Mn rich sedimentary rocks) and prevalence of reduced acidic conditions, due to paddy cultivation, in these areas. It was further observed that there is acute zinc (Zn) deficiency (< 0.6 ppm) in paddy growing soils of north Kanjhawala, Alipur and some parts of Najafgarh and Shahdara blocks due to extensive leaching of available Zn fractions to lower soil horizons. Similar available Zn deficiencies in high pH (8.5) soils of areas around Bamnoli village in E-Najafgarh block were also observed.     

Spatial Patterns and Rankings of Contaminant Concentrations in Herring Gull Eggs from 15 Sites in the Great Lakes and Connecting Channels, 1998–2002

Mean values of eight contaminants in Herring Gull (Larus argentatus) eggs were calculated for 15 Great Lakes sites for the 5 year period 1998–2002. The sites were ranked according to the concentrations of each of seven compounds relative to fish flesh criteria for the protection of piscivorous wildlife, and a single overall rank of contamination was calculated for each site. Based on this weighted ranking scheme, we found that sum PCBs, dioxin and DDE contributed the most (60.2, 30.5% and 8.5%, respectively) to the overall rankings. The weighted ranking scheme showed that eggs from Channel-Shelter Island (Saginaw Bay, Lake Huron), Strachan Island (St. Lawrence River) and Gull Island (northern Lake Michigan) ranked as the three most contaminated sites, while Agawa Rocks (eastern Lake Superior), Chantry Island (southern Lake Huron) and Port Colborne (eastern Lake Erie) ranked as the three least contaminated sites. Two of the three most contaminated sites are Areas of Concern; none of the three least contaminated sites are Areas of Concern.     

Cancer and Non-Cancer Health Risk from Eating Cassava Grown in Some Mining Communities in Ghana

Food crops such as cassava, cocoyam and other tuber crops grown in mining communities uptake toxic or hazardous chemicals such as arsenic, and cadmium, from the soil. Cassava is a stable food for Ghanaians. This study evaluated human health risk from eating cassava grown in some mining communities in Ghana such as Bogoso, Prestea, Tarkwa and Tamso, which are important mining towns in the Western Region of Ghana. The study evaluated cancer and non-cancer health effects from eating cassava grown in the study areas in accordance with US Environmental Protection Agency’s Risk Assessment guidelines. The results of the study revealed the following: cancer health risk for Tamso, 0.098 (RME – Reasonable Maximum Exposure) and 0.082 (CTE – Central Tendency Exposure). This means that approximately 10 and 8 out of 100 resident adults are likely to suffer from cancer related cases by RME and CTE parameters respectively. For Prestea, we have 0.010 and 0.12, which also means that approximately 1 out of 100 and 10 resident adults out of 100 are also likely to suffer from cancer related diseases by RME and CTE parameters. The results of the study obtained were found to be above the acceptable cancer risk range of 1× 10⁻⁶ to 1× 10⁻⁴, i.e., 1 case of cancer out of 1 million or 100,000 people respectively.