厌氧序批式反应器内挥发性脂肪酸积累特性研究

小试规模的厌氧序批式反应器（ASBR）,通过人工配水,研究了启动3个月时间以及一个运行周期内反应器内挥发性脂肪酸（VFA）的积累情况,并通过分析期间产甲烷活性的变化说明了控制VFA积累的重要性。经过近120 d的运行,乙酸和丙酸的最大比产甲烷活性分别提高了1.8和2.2倍,说明反应器的启动过程即是微生物群落的优化和选择的过程,ASBR的抗冲击的能力较强说明随启动的进行和种群的优化,活性污泥凝聚性能增强,对VFA的降解能力增强。     

Effects of tree size and spatial distribution on growth of ponderosa pine forests under alternative management scenarios

Forest ecosystems may be actively managed toward heterogeneous stand structures to provide both economic (e.g., wood production and carbon credits) and environmental benefits (e.g., invasive pest resistance). In order to facilitate wider adoption of possibly more sustainable forest stand structures, defining growth expectations among alternative management scenarios is crucial. To estimate the effect of tree size and spatial distributions on growth for forest structures commonly considered in uneven-aged forest stand management, large (0.2 ha+) plots were established in 14 uneven-aged ponderosa pine stands in eastern Montana. All study trees were stem-mapped and measured for diameter and 10-year sapwood and basal area increment. A generalized growth model was developed to predict both total and merchantable 10-year basal area increment for nine hypothetical stand structures [three diameter distributions (reverse-J, irregular, flat) × three spatial distributions (clumpy, partial clumpy, uniform)]. Results indicate that the size and spatial distributions of individual trees have a considerable effect on overall stand growth. The greatest total stand growth was in stands with reverse “J” shaped tree size distributions, while the greatest merchantable stand growth was in stands with “flat” diameter distributions and uniform spatial distributions. Through better comprehension of generalized uneven-aged stand growth dynamics, forest managers may better assess the effects of alternative stand structures on stand growth while providing forest stand structures that may be more resilient in a changing climate.     

Urbanization and its impact on groundwater: a remote sensing and GIS-based assessment approach

The perils of unplanned urbanization and increasing pressure of human activities on hydro-geomorphologic system often result in modification of the existing recharge mechanism, which leads to many environmental consequences. In the present research, an attempt has been made to investigate the applicability of remote sensing and geographical information system (GIS) in dealing with spatial and temporal variability of dynamic phenomena, like urbanization and its impact on groundwater. This paper covers primarily, quantitative and qualitative impacts of urban growth on the behavior of aquifer in Ajmer city (India). Urban growth of the Ajmer city in last 17 years has been estimated from the satellite images. Database related to urbanization and groundwater has been created in GIS. Groundwater recharge has been computed using a water balance approach known as Water Level Fluctuation Methodology. Recharge estimation methodology has been implemented in GIS to introduce the spatial variability of hydro-geological characteristics. Further, temporal and spatial variations in groundwater quality and quantity have been correlated with urban growth using overlay analysis in GIS. The study reveals a general decline in water table and quality with urbanization. Further, remote sensing and GIS technologies have been found useful in assessment of spatial and temporal phenomena of urbanization and its impact on groundwater system.     

Reclamation and revegetation of fly ash disposal sites - Challenges and research needs

Coal-fired power generation is a principal energy source throughout the world. Approximately, 70-75% of coal combustion residues are fly ash and its utilization worldwide is only slightly above 30%. The remainder is disposed of in landfills and fly ash basins. It is desirable to revegetate these sites for aesthetic purposes, to stabilize the surface ash against wind and water erosion and to reduce the quantity of water leaching through the deposit. Limitations to plant establishment and growth in fly ash can include a high pH (and consequent deficiencies of Fe, Mn, Cu, Zn and P), high soluble salts, toxic levels of elements such as B, pozzalanic properties of ash resulting in cemented/compacted layers and lack of microbial activity. An integrated organic/biotechnological approach to revegetation seems appropriate and should be investigated further. This would include incorporation of organic matter into the surface layer of ash, mycorrhizal inoculation of establishing vegetation and use of inoculated legumes to add N. Leaching losses from ash disposal sites are likely to be site-specific but a sparse number of studies have revealed enriched concentrations of elements such as Ca, Fe, Cd, Pb, and Sb in surrounding groundwater. This aspect deserves further study particularly in the longer-term. In addition, during weathering of the ash and deposition of organic matter during plant growth, a soil will form with properties vastly different to that of the parent ash. In turn, this will influence the effect that the disposal site has on the surrounding environment. Nevertheless, the effects of ash weathering and organic matter accumulation over time on the chemical, physical and biological properties of the developing ash-derived soil are not well understood and require further study.     

区域性煤矿百万吨死亡率指标的宏观预测研究

为了对煤矿安全状况进行宏观预测,提出区域性煤矿安全状况评价指标体系并建立了以煤矿百万吨死亡率指标标征区域性煤矿安全状况的灰色预测模型。在对煤矿综合机械化采煤率、大型煤矿产量比例、原煤全员效率指标预测分析的基础上,利用多元回归法综合预测煤矿百万吨死亡率指标。实例计算证明:建立的预测模型具有输入数据少、建模简单、计算快捷等优点;客观地反映出区域性的煤矿安全状况;该模型可进行煤矿安全的短期预测,并为制定煤矿安全控制指标提供理论依据。     

激波诱导下煤粉的爆炸压力测试

因气体爆炸导致沉积粉尘的二次爆炸的威力远大于单纯的气体或者粉尘爆炸产生的威力,利用自制的装置,诱导煤粉爆炸的激波由甲烷气体爆炸产生,对激波诱导下煤粉的爆炸压力Pmax、爆炸压力上升速率(dp/dt)max进行了实验研究。该实验分别研究煤粉浓度及煤粉粒度对爆炸指数的影响,其结果表明:对于不同的煤粉浓度,存在一个理想煤粉浓度值,在这个浓度下的煤粉爆炸压力值最大;随着煤粉粒度的减小,其爆炸压力不断升高。     

Fecal source tracking by antibiotic resistance analysis on a watershed exhibiting low resistance

The ongoing development of microbial source tracking has made it possible to identify contamination sources with varying accuracy, depending on the method used. The purpose of this study was to test the efficiency of the antibiotic resistance analysis (ARA) method under low resistance by tracking the fecal sources at Turkey Creek, Oklahoma exhibiting this condition. The resistance patterns of 772 water-isolates, tested with nine antibiotics, were analyzed by discriminant analysis (DA) utilizing a five-source library containing 2250 isolates. The library passed various representativeness tests; however, two of the pulled-sample tests suggested insufficient sampling. The resubstitution test of the library individual sources showed significant isolate misclassification with an average rate of correct classification (ARCC) of 58%. These misclassifications were explained by low antibiotic resistance (Wilcoxon test P < 0.0001). Seasonal DA of stream E. coli isolates for the pooled sources human/livestock/deer indicated that in fall, the human source dominated (P < 0.0001) at a rate of 56%, and that human and livestock respective contributions in winter (35 and 39%), spring (43 and 40%), and summer (37 and 35%) were similar. Deer scored lower (17–28%) than human and livestock at every season. The DA was revised using results from a misclassification analysis to provide a perspective of the effect caused by low antibiotic resistance and a more realistic determination of the fecal source rates at Turkey Creek. The revision increased livestock rates by 13–14% (0.04 ≤ P ≤ 0.06), and decreased human and deer by 6–7%. Negative misclassification into livestock was significant (0.04 ≤ P ≤ 0.06). Low antibiotic resistance showed the greatest effect in this category.     

Physicochemical substance properties as indicators for unreliable exposure in microplate-based bioassays

In the last years many efforts were made to transform standardized algal test protocols into low-cost microplate assays. While advantages were pointed out frequently, limitations are not systematically addressed, thus hindering a widespread utilisation. In this study a group of organic substances with a wide distribution of volatility (log K_AW from −6.53 to −2.13) and lipophilicity (log K_OW from 1.26 to 4.92) was investigated with respect to the influence of these physicochemical properties on their algal toxicity in different assays. Therefore the EC₅₀ values were determined with a microplate assay based on ISO 8692 protocol and the results were compared with those of an established algal growth inhibition test conducted in air tight glass vessels. Using the ratio of the EC₅₀ values, a clear connection between biological response and volatility as well as lipophilicity of test substances could be detected. Chemicals with a log K_OW higher than 3 or a Henry coefficient log K_AW higher than −4 were identified as less effective in the microplate assay than in the comparative assay. The loss in nominal concentration due to physicochemical properties could be shown to contribute to this using HPLC analysis. Consequently, when using microplate assay’s one should be aware that lipophilic and volatile chemicals might be underestimated in their toxicity, which could be indicated from evaluating related physicochemical properties modelled from structural information prior to an experimental investigation.     

Extended geometric method: a simple approach to derive adsorption rate constants of Langmuir-Freundlich kinetics

A new and simple equation has been presented here for calculation of adsorption and desorption rate constants of Langmuir-Freundlich kinetic equation. The derivation of new equation is on the basis of extension and correction to the geometric method which has been presented by Kuan et al. [Kuan, W.-H., Lo, S.-L., Chang, C.M., Wang, M.K., 2000. A geometric approach to determine adsorption and desorption kinetic constants. Chemosphere 41, 1741-1747] for the kinetics of adsorption/desorption in aqueous solutions. The correction is to consider that the concentration of solute is not constant and changes as adsorption proceeds. The extension is that we applied Langmuir-Freundlich kinetic model instead of Langmuir kinetic model to consider the heterogeneity and therefore it is more applicable to the real systems. For solving Langmuir-Freundlich kinetic model, some geometric methods and also Taylor expansion were used and finally a simple and novel equation was derived (Eq. (20)) for calculation of adsorption rate constant. This new method was named "extended geometric method". The input data of the obtained equation can be simply derived from initial data of adsorption kinetics. Finally the adsorption of methyl orange onto granular activated carbon was carried out at dynamic and equilibrium conditions and the capabilities of extended geometric method were examined by the experimental data.