Remote sensing water observation for supporting Lake Victoria weed management

This paper aims to assess the suitability of remote sensing for enhancing the management of water body resources and for providing an inexpensive way to gather, on a wide area, weed infestation extent and optical parameter linked to the water body status. Remotely sensed satellite images and ancillary ground true data were used to produce land cover maps, trough classification techniques, and water compounds maps, applying radiative transfer models. The study proposed within the framework of the cooperation between Italian Foreign Affair Ministry (through the University of Rome) and Kenyan Authorities has been carried out on the Kenyan part of the Lake Victoria. This lake is one of the largest freshwater bodies of the world where, over the last few years environmental challenges and human impact have perturbed the ecological balance affecting the biodiversity. The objective of this research study is to define the thematic products, retrievable from satellite images, like weed abundance maps and water compound concentrations. These products, if provided with an appropriate time frequency, are useful to identify the preconditions for the occurrence of hazard events like abnormal macrophyte proliferation and to develop an up-to-date decision support system devoted to an apprised territory, environment and resource management.     

PCB边角料的成分与热重-差热分析研究

在温度为380℃、N₂∶O₂=7∶3（体积比）的条件下,对PCB边角料进行的化学成分分析实验结果表明：4种PCB边角料中SiO₂+CaO+Al₂O₃大约在32%～38%之间,金属含量在22%～28%之间,其余为树脂,大约为45%左右;热重差热分析在氮气气氛、升温速率为20℃/min的条件下进行,其结果为：失重在12%～36%之间,热值在13～19 MJ/kg左右,失重主要发生在300～400℃之间,约占总失重的70%～90%,300℃以下质量基本上没有变化,400～1 200℃之间,质量约占10%～30%：并分析了TG-DTA曲线的影响因素,为工业回收废弃PCB提供了有价值的基础数据。     

测压法测定BOD的研究与应用

对采用差压式直读测定装置测定生化需氧量(BOD)的方法进行了研究,该方法操作简单、直观性好,简化了大量烦琐操作并可连续测定BOD。通过测压法与稀释接种法(测定BOD的国家标准方法)的对比及差异性统计检验,表明这两种方法没有显著性差异。经对实际水样的分析并与标准稀释法的分析结果进行比较,该方法准确度较高。     

脉冲伏安法测定乳品废水中的Cd(Ⅱ)和Pb(Ⅱ)离子

采用差分脉冲伏安法在CH3COOH-CH3COONa底液中测定乳品工业废水中的Cd2 和Pb2 等金属离子,并讨论了支持电解质、pH值的影响及部分离子的干扰等.在pH值为3-4范围内,铅的出峰电位为-0.36V.在正确是的条件下,对乳品废水中铅和镉的回收率分别为94%-106.5%和97%-103.5%.     

密度场干涉测量及其条纹处理计算

本文将普通纹影仪改造成激光差分干涉仪,并用于火焰等密度场的显示与测量。编制了条纹预处理和细化软件系统,并对干涉条纹进行了处理和细化计算。另外,针对细化后的条纹,编制了密度场的计算软件,并对蜡烛火焰和超声速轴对称绕流流场进行了计算,得到了密度场定量的结果。     

化学发光法和DOAS测定NOx的对比研究

分析了化学发光法和差分吸收光谱法(DOAS)测定环境中氮氧化物的原理及相应分析仪器的系统结构,指出了化学发光法氮氧化物分析仪的技术瓶颈及差分吸收光谱法的难点和关键技术。并对两种方法的优缺点及发展趋势进行分析。实验表明,化学发光法与差分吸收光谱法测定的结果具有很好的相关性。     

A comparison of numerical solutions of partial differential equations with probabilistic and possibilistic parameters for the quantification of uncertainty in subsurface solute transport

Traditionally, uncertainty in parameters are represented as probabilistic distributions and incorporated into groundwater flow and contaminant transport models. With the advent of newer uncertainty theories, it is now understood that stochastic methods cannot properly represent non random uncertainties. In the groundwater flow and contaminant transport equations, uncertainty in some parameters may be random, whereas those of others may be non random. The objective of this paper is to develop a fuzzy-stochastic partial differential equation (FSPDE) model to simulate conditions where both random and non random uncertainties are involved in groundwater flow and solute transport. Three potential solution techniques namely, (a) transforming a probability distribution to a possibility distribution (Method I) then a FSPDE becomes a fuzzy partial differential equation (FPDE), (b) transforming a possibility distribution to a probability distribution (Method II) and then a FSPDE becomes a stochastic partial differential equation (SPDE), and (c) the combination of Monte Carlo methods and FPDE solution techniques (Method III) are proposed and compared. The effects of these three methods on the predictive results are investigated by using two case studies. The results show that the predictions obtained from Method II is a specific case of that got from Method I. When an exact probabilistic result is needed, Method II is suggested. As the loss or gain of information during a probability–possibility (or vice versa) transformation cannot be quantified, their influences on the predictive results is not known. Thus, Method III should probably be preferred for risk assessments.     

活性污泥模型参数结构可识别性研究方法进展

参数估计是活性污泥模型应用的前提,可识别性研究是参数估计的第一步。本文以异养菌生长模型为例,论述了目前适用于活性污泥模型参数结构可识别性研究的几种方法,可以看出这些方法都存在着某些缺陷,因此寻求两种或多种方法的耦合方法成为以后理论研究的方向。     

基于Ansys APDL的废旧印刷电路板基板破碎分析

为解决废旧印刷电路板资源化中的粗碎问题,利用Ansys APDL模块和CATIA V5三维设计模块,运用以点代线的方法对电路板受力进行了数值模拟;并根据废旧印刷电路板破碎实验,对数值模拟结果进行验证;同时利用实验测得的数据对辊齿进行数值模拟与分析,验证辊齿在破碎过程中的可靠性。结果显示,铜和复合材料在一点的应力均大于其许用应力,判断其发生了断裂;废旧印刷电路板基板在两齿辊差速运行工况下破碎效果最好,证明以点代线方法可靠;辊齿根部的应力小于其许用应力,可靠性良好。为废旧印刷电路板的粗碎方法研究提供参考。其他差速工况(如9~18 r/min)对破碎效果的影响以及齿辊直径对产量的影响仍有待研究。     

Ultrasensitive determination of carbendazim in water and orange juice using a carbon paste electrode

A carbon paste electrode was used for the electrochemical quantification of carbendazim in water and orange juice samples. Carbendazim oxidation on the electrode surface was found to be controlled by adsorption. The novel electrochemical procedure for carbendazim quantification employed differential pulse voltammetry using a carbon paste electrode under optimal conditions. Carbendazim oxidation currents were linear at concentrations of 2.84 to 45.44 µg L^?1, with a limit of detection of 0.96 µg L^?1. The proposed method was applied to carbendazim quantification in ultrapurified water, river water, and orange juice. Recovery rates in water and orange juice samples were in the 97%–101% range, indicating that the method can be employed to determine carbendazim in these matrices, with advantages including shorter analysis time and lower cost than routine methods such as chromatography or spectroscopy. The electrode showed good reproducibility, remarkable stability, and especially good surface renewability by simple mechanical polishing. The recovery rates observed were highly concordant with those obtained for high-performance liquid chromatography, having a relative standard deviation of less than 1.3%.