Random walk modeling of wake dispersion for the exhaust tower of an underground tunnel in urban area

ＩｎｔｒｏｄｕｃｔｉｏｎＲｅｃｅｎｔｌｙ，ｓｏｍｅｉｎｓｔａｌｌａｔｉｏｎｓｗｉｔｈｓｐｅｃｉａｌｃｏｎｓｔｒｕｃｔｉｏｎｆｏｒｅｘｔｒａｃｔｉｎｇｃｏｎｔａｍｉｎａｎｔｇａｓ，ｓｕｃｈａｓａｎｅｘｈａｕｓｔｔｏｗｅｒｏｆｔｈｅｕｎｄｅｒｇｒｏｕｎｄｔｕｎｎｅｌ，ｅｔｃ．ｗｅｒｅｓｅｔｕｐｉｎｕｒｂａｎａｎｄｉｎｄｕｓｔｒｉａｌｃｏｍｐｌｅｘａｒｅａｓ．Ｔｈｅｅｆｆｅｃｔｓｏｆｔｈｅｓｅｃｏｎｓｔｒｕｃｔｉｏｎｓｏｎｔｈｅｆｌｏｗａｎｄｔｈｅｒｅｂｙｏｎｔｈｅｌｏｃａｌｄｉｓｐｅｒｓｉｏｎｏｆｔ…     

氧化塘离散数的研究

对模型氧化塘离散数d进行了相似分析,结果表明,模型塘的离散数d可以推广到原型中去.在试验资料基础上,提出了计算氧化塘离散数d值的经验公式,该公式反映了氧化塘内的极慢流动特征.应用该公式预测了有横向导流墙时氧化塘内的离散数,与试验结果符合较好.     

显像管玻壳铅尘污染特性的研究

以石家庄市显像管玻壳厂排放的铅尘为研究对象，通过在该玻壳厂周围土壤布点采样，较系统地研究了铅尘在大气和周围土壤中的迁移和转化规律，研究表明，用高斯模式能成功地预测铅尘在大气中的迁移扩散规律，玻壳厂周围土壤表层铅含量较大值出现在当地年主导风向（SSE，N）下风向，铅在土壤中的分布主要集中在0－20cm的耕作层，在20－40cm深度范围内，铅含量呈下降趋势，最大降幅达50％。     

青藏高原北缘P波波形线性度的动态跟踪及其变化的物理机制初探

利用数字化近震Ｐ波波形资料，追踪研究了青藏高原北缘１９９０年２月～１９９５年８月Ｐ波波形时间线性度的变化过程。发现该区较大地震发生前线性度有一定程度的下降现象。分析认为：大震前孕震区应力场的不均匀分布可使通过孕震区及其周缘的地震波产生频散，可能是较大地震前波形时间线性度下降的物理本质     

工业企业事故性泄漏扩散模型

对工业企业的泄漏扩散模型的国内外研究情况进行了调查研究,在对各模型优缺点分析的基础上,针对目前工业企业的事故后果模拟评价中所采用泄漏扩散模型存在的问题和不足,提出应用PG扩散模型研究物质泄漏的扩散模式,结合某企业的物质扩散算例说明该模型的实际应用,为工业企业的事故后果模拟评价以及重大事故应急预案的编制提供了一定的参考.     

核事故中放射性核素扩散浓度的理论预测

在高斯烟羽模型的基础上,对核事故中放射性云团在大气中的扩散规律进行了研究。利用倾斜烟团模式,考虑实际过程中核素粒子的重力沉降、雨洗作用以及放射性衰变等因素的影响,提出一种迅速估算放射性核素扩散浓度的方法。该方法可计算核事故中连续点源和瞬时点源在不同气象、地形条件下的浓度分布,并可获得地面的干沉积率和湿沉积率。放射性核素浓度的确定是放射性事故抢险救援和辐射防护等工作的基础和前提,是放射性事故应急救援的重要组成部分。该结果在核事故的应急救援过程中,对救援人员划定警戒区和确定周围居民的疏散范围具有重要意义,并可为制定救援方案和应急决策提供科学依据。     

Application of tracer ratio and inverse dispersion methods with boat-based plume measurements to estimate ammonia emissions from seabird colonies

Ammonia emissions from two contrasting seabird colonies in Scotland were measured, based on the determination of atmospheric concentrations downwind of the colonies. Atmospheric concentrations of ammonia (NH₃) across the downwind plume were compared with the inverse application of a Gaussian dispersion model (ID) to calculate the modelled NH₃ emission that would generate the measured cross-wind-integrated plume concentration. In parallel, a tracer gas (sulphur hexafluoride, SF₆) was released from the colonies with air samples taken to allow determination of SF₆ concentrations. On the basis of the known emission rate of SF₆, the magnitude of ammonia emissions was estimated by the cross-wind-integrated tracer ratio (TR) of NH₃/SF₆ concentrations. Coupled with data on annual bird attendance, the measurements indicate annual emissions from the Isle of May and the Bass Rock of 18 and 132 tonnes NH₃-N year^–1, respectively. The measured NH₃ emissions were compared with estimates of seabird nitrogen excretion to estimate the proportion of excreted N that is volatilised as NH₃ (F_Nr). The emission estimates of the two methods compared favourably, giving 4 and 6 kg NH₃-N h^–1 (F_Nr = 15%) for the Isle of May for the ID and TR methods, respectively, and 21 and 25 kg NH₃-N h^–1 (F_Nr = 50%) for the Bass Rock for the ID and TR methods, respectively. The results provide the first measurement-based estimates to allow regional up scaling of ammonia emissions from seabirds.     

Modelling nitrogen fluxes at the landscape scale

The distribution and impacts of different nitrogen pollutants are inextricably linked. To understand the problem fully, the interactions between the different pollutants need to be taken into account. This is particularly important when it comes to abatement techniques, since measures to reduce emissions of one nitrogen pollutant can often lead to an increase in another. This project represents a step towards greater understanding of these issues by linking together new and existing nitrogen flux models into a larger framework. The modelling framework has been constructed and some of the nitrogen flows between fields, farms and the atmosphere have been modelled for a UK study area for typical farm management scenarios.     

辽河三角洲土壤中石油类含量光谱分析初探

石油类物质对土壤的污染在油田区域内是一个普遍存在的问题。全面了解土壤中石油类物质含量是评价土壤石油污染的前提条件。对土壤石油污染评价的传统方法是在野外实地进行大量土壤采样,然后在试验室内分析石油类物质的含量。文中提出了利用少量野外土壤石油类物质样品,并结合野外光谱测量的方法对土壤中石油类物质进行分析的新方法。该方法应用于辽河三角洲,具有快速、省钱、省时、省力的特点,能对土壤中石油类物质含量进行宏观分析。满足了油田开发对土壤及环境污染评价的需要,并能为制定油田开发管理保护对策提供辅助信息。     

Ammonia large scale atmospheric dispersion experiments in industrial configurations

A programme of large-scale experiments for atmospheric dispersion was carried out by INERIS over a period extending from December 1996 to April 1997. The objectives of the test campaign were to measure anhydrous ammonia concentrations in a range of few meters to 2 km from the release, in order to generate data to be used to improve 2-phase discharge and dispersion modelling.

The discharges were released from a 6-tonne storage tank of pressurised liquid ammonia and through a discharge device with an outlet diameter of 2 in. Fifteen trials were carried out with various release configurations corresponding to industrial situations (impinging jets on the ground and on a wall at various distances, release through a flange without seal…). The quantity of ammonia discharged from the liquid phase varied according to the tests, from 1.4 to 3.5 tons for durations between 7 and 14 min and, therefore, at flow rates between 2 and 4.5 kg/s. Approximately 200 sensors were settled downwind to measure ammonia concentrations and temperature in the plume. These tests showed that for discharges with identical flow rates the distances corresponding to the same concentration vary a lot according to the configurations. These distances tend to be reduced by the presence of obstacles or retention dikes that collected liquid ammonia. In the paper, the main experimental results are presented. In order to enable the comparisons with numerical predictions, more detailed information are given in [Bouet R. (1999). Ammoniac—Essais de dispersion atmosphérique à grande échelle. INERIS rapport, ref INERIS-DRA-RBo-1999-20410 (available at http://www.ineris.fr/recherches/recherches.htm).