Hyperspectral Characteristics of Canopy Components and Structure for Phenological Assessment of an Invasive Weed

Spectral reflectance values of four canopy components (stems, buds, opening flowers, and postflowers of yellow starthistle (Centaurea solstitialis)) were measured to describe their spectral characteristics. We then physically combined these canopy components to simulate the flowering stage indicated by accumulated flower ratios (AFR) 10%, 40%, 70%, and 90%, respectively. Spectral dissimilarity and spectral angles were calculated to quantitatively identify spectral differences among canopy components and characteristic patterns of these flowering stages. This study demonstrated the ability of hyperspectral data to characterize canopy components, and identify different flowering stages. Stems had a typical spectral profile of green vegetation, which produced a spectral dissimilarity with three reproduction organs (buds, opening flowers, and postflowers). Quantitative differences between simulated flower stages depended on spectral regions and phenological stages examined. Using full-range canopy spectra, the initial flowering stage could be separated from the early peak, peak, and late flowering stages by three spectral regions, i.e. the blue absorption (around 480 nm) and red absorption (around 650 nm) regions and NIR plateau from 730 nm to 950 nm. For airborne CASI data, only the red absorption region and NIR plateau could be used to identify the flowering stages in the field. This study also revealed that the peak flowering stage was more easily recognized than any of the other three stages.     

Sustainable development conflict over freeway construction

Environmental disputes arise due to opposing views of various groups about their environmental concerns and their economic or developmental interests. Development and protection of the environment constitute two main contradictory objectives within the sustainable development paradigm, which are often in conflict. The decision support system, GMCR II, which implements the graph model for conflict resolution, is employed to model and analyze an environmental dispute arising over the construction of a new freeway between the Iranian capital, Tehran, and the city of Chalous located in the north of the country. This study demonstrates that the graph model for conflict resolution can be used as a methodology to promote a reasonable balance between economic development and environmental protection from a strategic viewpoint. In addition to systematically modelling the conflict by putting the existing information into proper perspective, it is shown how conflict analysis can be used for comparing alternative scenarios and predicting possible future outcomes. Readers should send their comments on this paper to: BhaskarNath@aol.com within 3 months of publication of this issue.     

Carbon dioxide emissions from cities in China based on high resolution emission gridded data

Based on the China high resolution emission gridded data (1 km spatial resolution), this article is aimed to create a Chinese city carbon dioxide (CO₂) emission data set using consolidated data sources as well as normalized and standardized data processing methods. Standard methods were used to calculate city CO₂ emissions, including scope 1 and scope 2. Cities with higher CO₂ emissions are mostly in north, northeast, and eastern coastal areas. Cities with lower CO₂ emissions are in the western region. Cites with higher CO₂ emissions are clustered in the Jing-Jin-Ji Region (such as Beijing, Tianjin, and Tangshan), and the Yangtze River Delta region (such as Shanghai and Suzhou). The city per capita CO₂ emission is larger in the north than the south. There are obvious aggregations of cities with high per capita CO₂ emission in the north. Four cities among the top 10 per capita emissions (Erdos, Wuhai, Shizuishan, and Yinchuan) cluster in the main coal production areas of northern China. This indicates the significant impact of coal resources endowment on city industry and CO₂ emissions. The majority (77%) of cities have annual CO₂ emissions below 50 million tons. The mean annual emission, among all cities, is 37 million tons. Emissions from service-based cities, which include the smallest number of cities, are the highest. Industrial cities are the largest category and the emission distribution from these cities is close to the normal distribution. Emissions and degree of dispersion, in the other cities (excluding industrial cities and service-based cities), are in the lowest level. Per capita CO₂ emissions in these cities are generally below 20 t/person (89%) with a mean value of 11 t/person. The distribution interval of per capita CO₂ emission within industrial cities is the largest among the three city categories. This indicates greater differences among per capita CO₂ emissions of industrial cities. The distribution interval of per capita CO₂ emission of other cities is the lowest, indicating smaller differences of per capita CO₂ emissions among this city category. Three policy suggestions are proposed: first, city CO₂ emission inventory data in China should be increased, especially for prefecture level cities. Second, city responsibility for emission reduction, and partitioning the national goal should be established, using a bottom-up approach based on specific CO₂ emission levels and potential for emission reductions in each city. Third, comparative and benchmarking research on city CO₂ emissions should be conducted, and a Top Runner system of city CO₂ emission reduction should be established.     

The structure of the fire fighting foam surfactant Forafac®1157 and its biological and photolytic transformation products

For several decades, perfluorooctane sulfonate (PFOS) has widely been used as a fluorinated surfactant in aqueous film forming foams used as hydrocarbon fuel fire extinguishers. Due to concerns regarding its environmental persistence and toxicological effects, PFOS has recently been replaced by novel fluorinated surfactants such as Forafac®1157, developed by the DuPont company. The major component of Forafac®1157 is a 6:2 fluorotelomer sulfonamide alkylbetaine (6:2 FTAB), and a link between the trade name and the exact chemical structure is presented here to the scientific community for the first time. In the present work, the structure of the 6:2 FTAB was elucidated by ¹H, ¹³C and ¹⁹F nuclear magnetic resonance spectroscopy and high-resolution mass spectrometry. Moreover, its major metabolites from blue mussel (Mytilus edulis) and turbot (Scophthalmus maximus) and its photolytic transformation products were identified. Contrary to what has earlier been observed for PFOS, the 6:2 FTAB was extensively metabolized by blue mussel and turbot exposed to Forafac®1157. The major metabolite was a deacetylated betaine species, from which mono- and di-demethylated metabolites also were formed. Another abundant metabolite was the 6:2 fluorotelomer sulfonamide. In another experiment, Forafac®1157 was subjected to UV-light induced photolysis. The experimental conditions aimed to simulate Arctic conditions and the deacetylated species was again the primary transformation product of 6:2 FTAB. A 6:2 fluorotelomer sulfonamide was also formed along with a non-identified transformation product. The environmental presence of most of the metabolites and transformation products was qualitatively demonstrated by analysis of soil samples taken in close proximity to an airport fire training facility.     

气相色谱-高分辨双聚焦磁质谱测定水中超痕量多氯萘

采用固相萃取法处理水样,气相色谱-高分辨双聚焦磁质谱法测定水中超痕量多氯萘,同位素内标法定量,并对样品前处理条件和仪器条件进行优化。试验表明：方法在0．500 ng/L～500 ng/L范围内线性良好;当取样体积为1 L时,方法检出限为0．005 ng/L～0．01 ng/L;对实际水样进行2个质量浓度水平的加标回收试验,平行测定6次的 RSD为2．7％～8．7％,回收率为70．2％～110％。方法适用性试验表明,水样中复杂的基质对测定无影响。     

DECISION-MAKING PROCESS ON THE DANUBE AND THE PLATTE1

ABSTRACT: Two case studies highlighting the institutional arrangements and decision-making processes used to attempt to allocate water on large scale river systems in two countries are presented. In both cases the implementation of river plans has been blocked by conflicts between those who wish to use water for irrigation, hydropower, or municipal purposes and those who wish to maintain instream flows for fish and wildlife. To date conflict has blocked the implementation of a large hydropower scheme on the Danube River, downstream from Vienna, Austria, and the construction of municipal and agricultural projects, as well as the relicensing of an existing hydropower facility on the Platte River in Nebraska. Analysis of the decision-making processes and institutional settings of both cases led to the identification of problem areas and development of recommendations that would support the achievement of compromise solutions for management.     

The Colorado,USA, Joint Review Process: an initial evaluation of its success as a permit reform by key participants

Colorado, USA, developed the Joint Review Process (CJRP) in 1978 to coordinate the application and review of permits required for major development projects. Since then, the state has used the process on over 20 projects. This study examined whether the CJRP has achieved its primary goals—enhanced coordination of agencies, enhanced public participation, and strengthened communication between agencies and project sponsors— and several related secondary goals. The success of the process was measured through a survey of 54 key people who had been directly involved with the process. Those surveyed included federal and state agency staff, local agency managers, corporate officers, private consultants, and environmental leaders. All groups, with one exception, agreed that the process achieved its primary goals and that it should be retained. Environmental leaders were neutral about whether the process enhanced public participation and about retaining the process. The report concludes with a review of recommended improvements to and applications of the CJRP.     

EFFECTS OF STATSGO AND SSURGO AS INPUTS ON SWAT MODEL'S SNOWMELT SIMULATION1

ABSTRACT: Soil data comprise a basic input of SWAT (Soil and Water Assessment Tool) for a watershed application. For watersheds where site specific soil data are unavailable, the two U.S. Department of Agriculture (USDA) soil databases, the State Soil Geographic (STATSGO) and Soil Survey Geographic (SSURGO) databases, may be the best alternatives. Although it has been noted that SWAT models using the STATSGO and SSURGO data may give different simulation results for water, sediment, and agricultural chemical yields, information is scarce on the effects of using these two databases in predicting streamflows that are predominantly generated from melting snow in spring. The objective of this study was to assess the effects of using STATSGO versus SSURGO as an input for the SWAT model's simulation of the streamflows in the upper 45 percent of the Elm River watershed in eastern North Dakota. Designating the model as SWAT‐STATSGO when the STATSGO data were used and SWAT‐SSURGO when the SSURGO data were used, SWAT‐STATSGO and SWAT‐SSURGO were separately calibrated and validated using the observed daily streamflows. The results indicated that SWAT‐SSURGO provided an overall better prediction of the discharges than SWAT‐STATSGO, although both did a good and comparable job of predicting the high streamflows. However, SWAT‐STATSGO predicted the low streamflows more accurately and had a slightly better performance during the validation period. In addition, the discrepancies between the discharges predicted by these two SWAT models tended to be larger at upstream locations than at those farther downstream within the study area.     

OPTIMIZING WELL PLACEMENT IN A COASTAL AQUIFER: OUTER CAPE COD,MASSACHUSETTS1

ABSTRACT: An inverse‐simulation approach is used to determine optimal strategies for developing public water‐supply systems in a shallow, coastal aquifer on the outermost arm of the Cape Cod peninsula in Massachusetts. Typically a forward simulation (or “trial and error”) approach is used to find best pumping strategies, but the chances of finding success with this tact diminish as the number of potential options grows large. Well locations and pumping rates are optimized with respect to: (1) providing sufficient water to areas of water‐quality impairment, (2) minimizing impacts to nearby surface waters, (3) preventing saltwater contamination due to overpumping, and (4) minimizing financial cost of well development. Potential well sites and water‐supply scenarios are separated into “politically‐based” and “resource‐based” categories to gain insight into the degree that pre‐existing political boundaries hinder best management practices. The approach provides a promising tool in transboundary water‐resources settings because it allows stakeholders to find solutions that best meet everyone's goals, as opposed to pursuing options that will create conflict, or are less than optimal.     

Understanding Dispute Resolution Processes for American and Australian Public Wildlands: Towards a Conceptual Framework for Managers

/ The last 20 years have seen the successful application of environmental dispute resolution processes, where people voluntarily negotiate toward mutually acceptable solutions, to many environmental disputes. The effects of contextual influences, such as the number of parties and presence of deadlines, on outcomes are known and frequently described. Less well documented and understood are the interaction processes themselves. This paper draws on two case studies to develop a conceptual framework describing these processes. Disputes associated with management planning for the Bob Marshall Wilderness Complex in the United States and Fitzgerald River National Park in Australia provided the cases. The conceptual framework derived had eight sequential stages: (1) joint definition of problems, (2) uncertainty about what to do, (3) agreement on group procedures, (4) realization of interdependence, (5) enthusiasm about collective possibilities, (6) commitment to working together, (7) consolidation of the group, and (8) implementation of a resolution. The framework provides new insights for managers of public wildlands, especially the need for varying but ongoing managerial involvement in dispute resolution processes. High levels of involvement and influence are essential at the beginning in problem definition and group procedure design and at the end in implementing resolutions. Conversely, agency members must be willing to exert less influence, while still being involved and committed to collective purposes, during the middle stages. Also apparent from the conceptual framework is the importance of developing shared understandings and of allowing sufficient time for understanding to develop, if successful resolution is to be achieved. KEY WORDS: Environmental dispute resolution; Conceptual framework; Public wildlands; Shared understandings; Australia