A GFP-based bacterial biosensor with chromosomally integrated sensing cassette for quantitative detection of Hg(II) in environment

A mercury biosensor was constructed by integrating biosensor genetic elements into E. coli JM109 chromosome in a single copy number, using the attP/attB recombination mechanism of λphage. The genetic elements used include a regulatory protein gene (merR) along with operator/promoter (O/P) derived from the mercury resistance operon from pDU1358 plasmid of Serratia marcescens. The expression of reporter gene gfp is also controlled by merR/O/P. Integration of the construct into the chromosome was done to increase the stability and precision of the biosensor. This biosensor could detect Hg(II) ions in the concentration range of 100-1700 nmol/L, and manifest the result as the expression of GFP. The GFP expression was significantly different (P ≤ 0.05) for each concentration of inducing Hg(II) ions in the detection range, which reduces the chances of misinterpretation of results. A model using regression method was also derived for the quantification of the concentration of Hg(II) in water samples.     

pH-dependent leaching behaviour and other performance properties of cement-treated mixed contaminated soil

Portland cement has been widely used for stabilisation/solidification (S/S) treatment of contaminated soils. However, there is a dearth of literature on pH-dependent leaching of contaminants from cement-treated soils. This study investigates the leachability of Cu, Pb, Ni, Zn and total petroleum hydrocarbons (TPH) from a mixed contaminated soil. A sandy soil was spiked with 3000 mg/kg each of Cd, Cu, Pb, Ni and Zn, and 10,000 mg/kg of diesel, and treated with ordinary Portland cement (CEM I). Four different binder dosages, 5%, 10%, 15% and 20% (m/m) and different water contents ranging from 13%-19% dry weight were used in order to find a safe operating envelope for the treatment process. The pH-dependent leaching behaviour of the treated soil was monitored over an 84-day period using a 3-point acid neutralisation capacity (ANC) test. The monolithic leaching test was also conducted. Geotechnical properties such as unconfined compressive strength (UCS), hydraulic conductivity and porosity were assessed over time. The treated soils recorded lower leachate concentrations of Ni and Zn compared to the untreated soil at the same pH depending on binder dosage. The binder had problems with Pb stabilisation and TPH leachability was independent of pH and binder dosage. The hydraulic conductivity of the mixes was generally of the order, 10^-8 m/sec, while the porosity ranged from 26%-44%. The results of selected performance properties are compared with regulatory limits and the range of operating variables that lead to acceptable performance described.     

Efficiency and degradation products elucidation of the photodegradation of mefenpyrdiethyl in water interface using TiO2 P-25 and Hombikat UV100

The photodegradation of mefenpyrdiethyl (MFD), an herbicide safener, was investigated in aqueous suspensions by using Degussa P-25 and Hombikat UV100 titanium oxide under simulated sunlight irradiation. The effects of initial concentration of the herbicide, pH, catalysts and hydrogen peroxide doses as well as their combinations were studied and optimized. Accordingly, the kinetic parameters were determined and the effectiveness of the processes was assessed by calculating the rate constants. A pseudo first-order kinetics was observed. Under experimental conditions, the degradation rate constants were strongly influenced using P-25 and no noticeable effect was observed for Hombikat UV100. DFT calculations with B3LYP/6-311+G(2d,p)//B3LYP/6-31+G(d,p) level of theory were performed to check whether significant conformational changes occur when the charge state of the MFD substrate changes and whether these changes could play a role in the dependency of photodegradation rate constant on the studied pH. High resolution mass spectrometry (FT-ICR/MS) was implemented to identify the main degradation products.     

Seasonal trend of ambient PCDD/Fs in Tianjin City, northern China using active sampling strategy

The spatial concentrations, seasonal trends, profiles and congener pairs of ambient polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) were investigated within a seasonally active sampling scheme during Jun 2008 and Jan 2009 in Tianjin City, northern China. The PCDD/F concentrations ranged 14.2-172 fg I-TEQ/m³ (average 69.3 fg I-TEQ/m³) in summer and (89.8-1.01) × 10³ fg I-TEQ/m³ (average 509 fg I-TEQ/m³) in winter, respectively, except for the E-waste dismantling site where much higher values were observed (1.04 × 10³ fg I-TEQ/m³ in summer and 7.123 × 10³ fg I-TEQ/m³ in winter). The results indicated a significantly seasonal trend with higher TEQ values in winter as compared with summer, which could be related to increased emission sources and seasonal variations of the atmospheric boundary layer height. 2,3,4,7,8-PeCDF was the dominant contributor to the total PCDD/F toxic equivalents, and 2,3,7,8-TCDD was detected at almost all the sampling sites in winter. Most of the similarly substituted PCDD/F congener pairs exhibited high correlations, suggesting that they might have similar environmental fate or sources. But different seasonal and spatial distributions of PCDD/F concentrations indicated that the emission sources might be intermittent.     

广州市不同功能区大气二噁英含量和分布特征研究

应用气相色谱-高分辨率质谱仪(GC-HRMS)对广州市秋冬季6个区域环境空气样品中的17种2,3,7,8-氯代二英含量进行了检测.结果表明,广州市各观测区域大气中二英毒性当量浓度范围为0.151～2.230pg.m-3,均值为0.418pg.m-3.各观测区域空气中二英毒性当量浓度分布存在一定的差异,本研究的背景区、居民住宅区和商业区二英毒性当量浓度较低且水平相近,分别为(0.294±0.099)、(0.305±0.115)、(0.308±0.102)pg.m-3.交通枢纽区、郊区和工业区二英毒性当量浓度相对较高,分别为(0.342±0.049)、(0.423±0.113)和(0.838±0.704)pg·m-3.广州市不同功能区二英毒性当量浓度呈现背景区<住宅区<商业区<交通枢纽区<郊区<工业区的分布特点.与2004年相比,广州市城区二英毒性当量浓度有所下降,郊区毒性当量浓度有所上升.     

Adsorption characteristics and mechanism of Cr （Ⅵ） on chitoan-yttrium porous microsphere

以壳聚糖和Y2（OH）5NO3为原料通过乳液交联法制备了壳聚糖-钇（Ch—Y）复合微球,通过扫描电镜、透射电镜、X射线衍射、红外光谱等方法对其表面形貌、结构进行了表征.探讨了溶液的pH值、反应时间、投加量、离子初始浓度对其吸附性能的影响.研究结果表明,壳聚糖-钇（Ch—Y）复合微球在pH值为3的酸性环境中对Cr（Ⅵ）保持了较高的吸附能力,吸附容量为52.39mg·g-1,其吸附行为符合Langmuir吸附等温模型;通过吸附机理的研究,发现壳聚糖-钇（Ch—Y）对Cr（Ⅵ）吸附是化学吸附静电吸附协同氧化Cr（Ⅵ）离子作用来实现的.     

植物释放挥发性有机物(BVOC)向二次有机气溶胶(SOA)转化机制研究

利用自制玻璃生态罩,研究植物挥发性有机物（BVOC）的释放机制.在紫外光诱导条件下,BVOC经历一系列的光氧化反应,最终产生了二次有机气溶胶（SOA）.运用固相微萃取（SPME）和气相色谱-质谱联用（GC-MS）技术,对目标植物（驱蚊草）释放出的BVOC进行采样分析,共检测出7种主要化合物,其中主要为单萜类、倍半萜类、醇类和酮类物质.研究发现,在紫外光的照射下,这些BVOC可以发生光氧化反应转化为SOA.利用串联差分淌度分析仪（TDMA）测定SOA的粒径分布和SOA颗粒物的吸湿性.结果表明粒径范围大致是50～320 nm,吸湿性研究发现这些SOA具有吸湿性,生长因子可以从1.05增长到1.11.     

工业园区TVOC和恶臭的电子鼻检测技术研究

根据工业园区中TVOC和恶臭可能存在的主要气体组分,筛选传感器阵列,构建用于检测工业园区内TVOC和恶臭的电子鼻系统.本研究设计了TVOC污染指数（TPI）和恶臭污染指数（OPI）及基于电子鼻的现场检测方法.在此基础上,结合嘉兴市乍浦港区内化工园区污染情况分析,选择6个检测点进行现场检测,各传感器响应值经PCA分析,提取了2个主成分即可将8个传感器分为2类：TVOC型（S1）和恶臭型（S2～S8）.将现场采集的气体样品用GC/MS进行定性分析,各采样点TVOC物质积分面积百分比在10%以上的累积起来大多都占总面积的90%以上,而恶臭类物质则大多都在10%以下.结果表明：①选用合适的传感器阵列,结合PCA分析,可以初步反映工业园区内TVOC和恶臭的污染情况;②结合电子鼻测得的污染指数与GC/MS定性分析结果,可以大体得出工业园区TVOC和恶臭总体污染情况及各种污染物分布情况;③电子鼻和GIS技术综合应用到工业园区TVOC和恶臭的检测,能初步用于评估工业园区空间污染情况.     

铁氮掺杂碳纳米管/纤维复合物制备及其催化氧还原的效果

阴极催化剂是影响微生物燃料电池(microbial fuel cell,MFC)性能的关键因素.通过研究制备成本低廉、氧还原反应(ORR)催化活性高的阴极催化剂来替代Pt/C对于实现MFC规模化应用具有重大意义.研究采用化学气相沉淀法,以三聚氰胺作为碳氮前驱物、以黑珍珠2000或乙炔炭黑作为碳源,外加醋酸亚铁作为铁前驱物,合成了两种铁氮掺杂碳纳米管/纤维复合物(FeNCB和FeNCC),作为MFC的阴极催化剂.通过循环伏安法和旋转圆盘-环电极分析FeNCB、FeNCC和Pt/C的ORR催化活性的差异,并用MFC验证其差异.结果表明,FeNCB性能与Pt/C相当,优于FeNCC,其催化路径是通过4电子途径催化氧还原反应;MFC-FeNCB性能略优于MFC-Pt/C,显著优于MFC-FeNCB有助于MFC的扩大化,其最大功率密度为1 212.8mW·m~(-2),开路电压为0.875 V,电池稳定电压为(0.500±0.025)V.用X射线衍射、X射线光电子光谱、拉曼光谱等进一步分析显示,复合物中碳纳米管管径的大小、铁氮掺杂的类型和含量以及氧含量是引起制备的复合物催化氧还原性能差异的原因所在.     

遗体火化二(口恶)英类排放水平及影响因素

采用现场监测方式调查了国内13台火化机烟气中PCDD/Fs排放情况,分析火化炉型、烟气处理设施和随葬品等因素对其排放水平的影响,提出相关污染控制措施和管理措施的建议. 结果表明,各样品的PCDD/Fs毒性当量浓度(以I-TEQ计,下同)差异较大,范围为0.027~15.8 ng·m^-3,平均值为3.2 ng·m^-3. PCDD/Fs排放因子范围为45.9~22236 ng·具^-1,均值为4738 ng·具^-1. 平板炉PCDD/Fs排放水平总体低于捡灰炉,达标率高于捡灰炉. 火化烟气中17种PCDD/Fs异构体分布特征存在一定差异. 部分火化机PCDD/Fs排放浓度仍处于较高水平,有必要从源头上减少污染、提高污染控制技术、加强政府监管,如将随葬品另炉火化、增设二燃室、配备布袋除尘器和活性炭喷射处理设施等.