鄂尔多斯盆地马家沟组马五_1亚段地层水特征及对CO_2地质封存的意义

CO_2地质封存技术是实现碳减排的有效措施,对鄂尔多斯盆地马家沟组马五_1亚段地层水特征进行研究,是下一步实施工程化CO_2封存的首要前提。本文依据对深部钻井取样的直观观察与实验测试,采用单项指标分类评价和多项指标综合评价的方法深入分析了马家沟组马五_1亚段地层水的物理性质、化学性质、地层水类型和水化学特征参数。结果表明:马家沟组马五_1亚段地层水密度较大、矿化度极高,属于卤水,含量最多的离子是Cl~-,其次是Ca~(2+),地层水是CaCl_2型。钠氯系数、氯镁系数、脱硫系数和镁钙系数的分析表明马五_1亚段地层水封闭性极好,处于较强的还原环境。综合分析认为马家沟组马五_1亚段地层水具备实施CO_2封存的良好条件,非常适宜进行CO_2封存。     

重庆市主城区大气中NO2浓度时空分布特征

利用2017年1月1日～2017年12月31日重庆市主城区17个国控空气质量监测站24 h自动连续采样的二氧化氮(NO_2)浓度小时数据,探讨九个主城区大气中NO_2浓度的时空分布特征、与气象参数之间的关系和气团运动的影响。结果表明,主城区大气NO_2浓度全年北碚区达标率较高(76.16%),渝中区达标率低(3.84%),日均浓度呈夏季前下降、夏季后上升的趋势;月均浓度表现为冬季月份浓度高,其次为春季、秋季和夏季月份;周六、周日、周一和周二的浓度均值较高,周三、周四和周五的较低;小时浓度基本呈5:00～11:00和16:00～20:00上升、其余时间段下降的变化趋势;大气NO_2浓度空间分布差异显著,西北地区(北碚)大气NO_2浓度偏低、渝中区及其附近区域浓度偏高。影响大气中的NO_2浓度的主要气象因素有:气温、降水量、气压、日照和相对湿度;四季气流输送中,春冬季气流轨迹相似,主要源自西部、西北部气流,春季气流轨迹的ρ(NO_2)最高,夏季最低。研究结果可为今后重庆市大气的治理提供研究基础。     

2005~2016年中国大气边界层SO2的时空变化趋势

利用臭氧观测仪（OMI）卫星遥感反演的大气边界层（PBL）SO₂柱含量（PBL SO₂）数据分析了自2005年以来中国PBL SO₂柱含量数据的空间分布特征、变化趋势及其影响的原因.从长时间尺度上,PBL SO₂柱含量呈现明显的下降趋势.2005年中国区域年平均PBL SO₂柱含量为0.317DU,2016年为0.276DU,减少了0.041DU,大约为13.2%.SO₂柱含量呈现明显的周期变化特征.冬季浓度较高,夏季较低,最小值和最大值分别出现在7和12月,分别为0.246和0.404DU.小波分析显示SO₂的变化在10个月的尺度水平上存在明显的主振荡周期,在40个月的尺度水平上存在明显的次周期变化.中国区域SO₂污染严重的高值区主要出现在京津冀鲁环渤海地区、关中平原（山西省和陕西省）、河南省大部分地区、四川盆地、长江三角洲地区和珠江三角洲.最大的SO₂柱含量值可达1.1DU以上.京津冀鲁环渤海地区的高值区已经延伸到长江三角洲地区,有向南延伸和珠江三角洲连在一起的趋势.由于地形和天气特征的影响,四川盆地地区SO₂出现次高值区.在青藏高原和西北地区,SO₂浓度较低,呈现背景值特征,多年平均的SO₂约在0.05DU的水平.中国区域SO₂变化趋势在空间分布上存在明显的区域差异,变化的范围在-0.70~0.15DU之间.SO₂出现逐渐减少的地区主要是在高值区,如京津冀鲁环勃海地区、关中平原、四川盆地,长江中下游和珠江三角洲.减幅最大的是四川盆地和珠江三角洲,大约减少了61%.四川盆地2005~2016年约减少了0.55DU;珠江三角洲约减少了0.45DU.出现增长的地区主要是西部和北部地区,以及东南沿海除珠三角外的大部分区域,最大增长大约为0.15DU.     

有机物对SAD的影响及其数学模拟

通过血清瓶批式实验,研究了不同C/N下葡萄糖和乙酸钠对厌氧氨氧化耦合反硝化系统（SAD）污泥活性及脱氮性能的影响.耦合系统颗粒污泥为在亚硝态氮充足的UASB连续流反应器中培养得到,具有较高的厌氧氨氧化活性和反硝化活性.以葡萄糖为碳源,C/N分别为1,2,4时,厌氧氨氧化活性差异不大,反硝化活性逐渐增加,亚硝态氮最大降解速率分别为0.265,0.345,0.453kgN/（kgVSS·d）;以乙酸钠为碳源,C/N分别为1、2、4时,厌氧氨氧化活性和反硝化活性都无明显差别.相同C/N下,耦合系统以葡萄糖为碳源时的厌氧氨氧化活性较高,以乙酸钠为碳源时的反硝化活性较高.C/N分别为1,2,4时,以葡萄糖为有机物的氨氮最大降解速率分别为乙酸钠的1.15,1.19,1.58倍,以乙酸钠为有机物时反应的亚硝态氮最大降解速率分别为葡萄糖的1.89,1.48,1.15倍.实验的数学模拟结果表明,通过模型的模拟,能较为准确地预测实验过程中氮素的变化趋势,在C/N为1~4时耦合系统中颗粒污泥的厌氧氨氧化活性无较大变化.     

酰胺基两性分子对二硫化钨吸附铀容量的影响机制

含铀废水中铀的回收主要是基于材料与[UO₂(H₂O)₅]²⁺中UO₂ ²⁺之间的络合,但H₂O的电偶极矩对络合有显著弱化作用。采用酰胺基两性分子N,N-二甲基-9-癸烯酰胺（NADA）氢键作用与[UO₂(H₂O)₅]²⁺形成UO₂[(H₂O)_xC₁₂H₂₃NO]_n ^*（x<5,UO₂-Coordination Compound,简称UO₂-CC）,选取惰性物质WS₂为吸附材料,通过静态吸附试验（不同pH、接触时间、浓度和温度）分别研究其对UO₂ ²⁺和UO₂-CC的吸附量。动力学拟合结果表明,二者的吸附反应是化学吸附过程,UO₂ ²⁺经NADA重构后,吸附时间从240 min缩短至180 min,准二级动力学吸附常数提高1.35倍。等温吸附研究结果表明,WS₂与UO₂-CC络合过程符合Langmuir吸附等温模型,且NADA的加入使吸附由自发吸热过程转变为自发放热过程,吸附反应过程有序度增加。NADA原位重构[UO₂(H₂O)₅]²⁺后,WS₂对UO₂ ²⁺的平衡吸附量由45.03 mg/g（WS₂/UO₂ ²⁺体系）提高到122.14 mg/g（WS₂/UO₂-CC体系）。采用光谱分析（X射线光电子能谱法）从分子水平深入研究NADA原位重构[UO₂(H₂O)₅]²⁺后在WS₂上的吸附机制,揭示静电、氢键和U—S共价键等作用力对吸附的贡献,特别是NADA的氢键作用。

     

纳米二氧化钛与磷互作对莱茵衣藻砷累积与生物转化的影响

纳米材料因其较大的比表面积以及较强的反应活性,对砷（As）的环境行为具有一定的调控作用,而这可能对微藻As吸收代谢产生潜在的影响。以模式生物莱茵衣藻（Chlamydomonas reinhardtii）为研究对象,探究不同磷酸盐（PO₄ ³⁻）浓度下,纳米二氧化钛（nano-TiO₂）对莱茵衣藻中As(Ⅴ)累积和生物转化的影响。结果表明：暴露初期（第1天）nano-TiO₂作为载体显著促进了0.013、0.100和0.500 mmol/L PO₄ ³⁻处理组藻细胞对As的累积,但随着暴露时间的延长,nano-TiO₂的载体效应呈下降趋势;暴露结束后（第8天）,nano-TiO₂添加组中,进入藻细胞的As(Ⅴ)除了还原成As(Ⅲ)及甲基化成二甲基砷外,还能进一步转化为一种可能为砷糖的未知化合物,且随着PO₄ ³⁻浓度的降低,藻细胞内这种砷糖所占比例逐渐增加,这可能会抑制As(Ⅲ)的外排;暴露结束后（第8天）,培养基中主要检测到的As形态为As(Ⅴ)和As(Ⅲ),1.0和0.5 mmol/L处理组还有少量二甲基砷。nano-TiO₂的添加降低了培养基中As(Ⅲ)的浓度,尤其是0.5和1.0 mmol/L PO₄ ³⁻处理组。研究结果表明,纳米材料与PO₄ ³⁻的互作可显著改变微藻As的累积与代谢过程。

     

Enhanced cyanogen chloride formation after UV/PS and UV/H2O2 pre-oxidation and chlorination in natural river water

Ultraviolet/persulfate (UV/PS) and Ultraviolet/hydrogen peroxide (UV/H₂O₂) have attracted much attention in recent years as advanced oxidation processes for water treatment. However, it is not all clear how these two methods affect the formation of cyanogen chloride (CNCl) in the subsequent water chlorination process. In this study, it was found that both UV/H₂O₂ and UV/PS pre-oxidation promoted the formation of CNCl in six actual water samples collected from urban rivers. Glycine, uric acid, arginine and histidine were investigated as the model compounds to explore the effects of different methods on the production of CNCl. The results showed that compared with chlorination alone, pre-oxidation by UV/H₂O₂ and UV/PS can reduce the production of CNCl for glycine and uric acid by up to 95% during post-chlorination process. However, they can greatly promote the formation of CNCl for arginine and histidine by up to 120-fold. In a more detailed investigation, pre-oxidation of histidine formed highly reactive intermediates to chlorine, leading to increased CNCl formation and chlorine consumption. The results showed that the precursors of CNCl was altered after pre-oxidation, and need to be re-evaluated.     

Strategies for improving the photocatalytic performance of metal-organic frameworks for CO2 reduction: A review

Photocatalytic CO₂ reduction is an appealing strategy for mitigating the environmental effects of greenhouse gases while simultaneously producing valuable carbon-neutral fuels. Numerous attempts have been made to produce effective and efficient photocatalysts for CO₂ reduction. In contrast, the selection of competitive catalysts continues to be a substantial hindrance and a considerable difficulty in the development of photocatalytic CO₂ reduction. It is vital to emphasize different techniques for building effective photocatalysts to improve CO₂ reduction performance in order to achieve a long-term sustainability. Metal-organic frameworks (MOFs) are recently emerging as a new type of photocatalysts for CO₂ reduction due to their excellent CO₂ adsorption capability and unique structural characteristics. This review examines the most recent breakthroughs in various techniques for modifying MOFs in order to improve their efficiency of photocatalytic CO₂ reduction. The advantages of MOFs using as photocatalysts are summarized, followed by different methods for enhancing their effectiveness for photocatalytic CO₂ reduction via partial ion exchange of metal clusters, design of bimetal clusters, the modification of organic linkers, and the embedding of metal complexes. For integrating MOFs with semiconductors, metallic nanoparticles (NPs), and other materials, a number of different approaches have been also reviewed. The final section of this review discusses the existing challenges and future prospects of MOFs as photocatalysts for CO₂ reduction. Hopefully, this review can stimulate intensive research on the rational design and development of more effective MOF-based photocatalysts for visible-light driven CO₂ conversion.     

Heterojunctioned CuO/Cu2O catalyst for highly efficient ozone removal

In recent years, near surface ozone pollution, has attracted more and more attention, which necessitates the development of high efficient and low cost catalysts. In this work, CuO/Cu₂O heterojunctioned catalyst is fabricated by heating Cu₂O at high temperature, and is adopted as ozone decomposition catalyst. The results show that after Cu₂O is heated at 180°C conversion of ozone increases from 75.2% to 89.3% at mass space velocity 1,920,000 cm³/(g·hr) in dry air with 1000 ppmV ozone, which indicates that this heterojunction catalyst is one of the most efficient catalysts reported at present. Catalysts are characterized by electron paramagnetic resonance spectroscopy and ultraviolet photoelectron spectroscopy, which confirmed that the heterojunction promotes the electron transfer in the catalytic process and creates more defects and oxygen vacancies in the CuO/Cu₂O interfaces. This procedure of manufacturing heterostructures would also be applicable to other metal oxide catalysts, and it is expected to be more widely applied to the synthesis of high-efficiency heterostructured catalysts in the future.     

Experimental and theoretical studies on NO selective catalytic oxidation over α-MnO2

Based on the experimental and theoretical methods, the NO selective catalytic oxidation process was proposed. The experimental results indicated that lattice oxygen was the active site for NO oxide over the $\mathrm{\alpha }$-MnO₂(110) surface. In the theoretical study, DFT (density functional theory) and periodic slab modeling were performed on an $\mathrm{\alpha }$-MnO₂(110) surface, and two possible NO oxidation mechanisms over the surface were proposed. The non-defect $\mathrm{\alpha }$-MnO₂(110) surface showed the highest stability, and the surface O_s (the second layer oxygen atoms) position was the most active and stable site. O₂ molecule enhanced the joint adsorption process of two NO molecules. The reaction process, including O₂ dissociation and O=N-O-O-N=O formation, was calculated to carry out the NO catalytic oxidation mechanism over $\mathrm{\alpha }$-MnO₂(110). The results showed that NO oxidation over the $\mathrm{\alpha }$-MnO₂(110) surface exhibited the greatest possibility following the route of O=N-O-O-N=O formation. Meanwhile, the formation of O=N-O-O-N=O was the rate-determining step.