Fe2+浓度对生物产氢动力学的影响

研究了Fe²⁺在0～1 500 mg/L 范围内对混合细菌发酵产氢动力学的影响.结果表明,以葡萄糖为底物,在35℃ 和初始pH为7.0时,当Fe²⁺浓度为0～300 mg/L 时,混合细菌发酵葡萄糖的最大累积产氢量和平均产氢速率都随着Fe²⁺浓度的增加而增加;当Fe²⁺浓度为300 mg/L 时,最大累积产氢量和平均产氢速率最高,分别为302.3 mL和30.0 mL/h .当Fe²⁺浓度为0～350 mg/L 时,比产氢率随着Fe²⁺浓度的增加而增加,当Fe²⁺浓度为350 mg/L 时,最大比产氢率为311.2 mL/g .修正的Logistic模型能很好地描述累积产氢量随时间的变化规律.修正的Han-Levenspiel模型能很好地描述Fe²⁺浓度对平均产氢速率的影响.     

亚热带土壤反硝化过程中NO-3-N对CH4排放的影响

研究了发育于不同成土母质和不同土地利用方式下的45个亚热带土壤样本,在反硝化严格厌氧培养条件下（密闭、淹水、充N₂）,加入KNO₃的处理（加入N量为200 mg·kg^-1）和不加KNO₃的空白对照对CH₄产生和排放的影响.结果表明,厌氧培养条件下无论加入KNO₃与否,CH₄的产生和排放首先取决于土壤有机碳总量水平及其有效性.对照土壤中花岗岩母质发育的土壤和KNO₃处理土壤中稻田利用方式下的土壤CH₄排放量最高.加入KNO₃显著抑制了CH₄的产生和排放,NO^-₃-N对CH₄产生的抑制效应可能较N₂O对CH₄产生的抑制效应更大.加入KNO₃处理中厌氧培养第1周内的NO^-₃-反硝化量和降低速率是决定CH₄排放量的关键因素.不加KNO₃的对照土壤中,73％的土样表现为 Fe²⁺的产生和CH₄的排放之间呈指数关系增长,表明Fe³⁺和CO₂的还原可同步进行.NO^-₃-N不仅显著抑制了CH₄的产生和排放,也抑制了Fe³⁺的还原.     

改性TiO2的制备、表征及光解水制氢性能研究

以陶粒为载体,采用改进的溶胶-凝胶法制备B、Ni共掺杂陶粒负载纳米TiO2光催化剂。利用XRD,TG-DTA,FT-IR等手段对其组成、结构等进行分析和表征。以250 W紫外灯为光源,三乙胺为目标污染物和电子给体,考察了B-Ni2O3-TiO2/陶粒合成体降解污染物耦合光解水制氢的光催化性能;结果表明：所制得的B-Ni2O3-TiO2/陶粒催化剂具有较高的产氢效率,并探讨了焙烧温度、三乙胺溶液初始浓度等对催化剂光催化活性的影响。     

Acid deposition critical loads modeling for the simulation of sulfur exceedance and reduction in Guangdong, China

The current acid deposition critical loads in Guangdong, China were calculated using the PROFILE model with a 3 km × 3 km resolution. Calculations were carried out for critical loads of potential acidity, actual acidity, sulfur and nitrogen, with values in extents of 0–3.5, 0–14.0, 0–26.0 and 0–3.5 kmol/(hm2·year), respectively. These values were comparable to previously reported results and reflected the influences of vegetation and soil characteristics on the soil acid buffering capacity. Simulations of S...     

Isolation of Cr(VI) reducing bacteria from industrial e uents and their potential use in bioremediation of chromium containing wastewater

The present study is aimed at assessing the ability of Bacillus sp.JDM-2-1 and Staphylococcus capitis to reduce hexavalent chromium into its trivalent form.Bacillus sp.JDM-2-1 could tolerate Cr(Ⅵ) (4800 μg/mL) and S.capitis could tolerate Cr(Ⅵ) (2800 μg/mL).Both organisms were able to resist Cd2+ (50 μg/mL),Cu2+ (200 μg/mL),Pb2+ (800 μg/mL),Hg2+ (50 μg/mL) and Ni2+ (4000 μg/mL).S.capitis resisted Zn2+ at 700 μg/mL while Bacillus sp.JDM-2-1 only showed resistance up to 50 μg/mL.Bacillus sp.JDM-2-1 and S.capitis showed optimum growth at pH 6 and 7,respectively,while both bacteria showed optimum growth at 37℃.Bacillus sp.JDM-2-1 and S.capitis could reduce 85% and 81% of hexavalent chromium from the medium after 96 h and were also capable of reducing hexavalent chromium 86% and 89%,respectively,from the industrial effluents after 144 h.Cell free extracts of Bacillus sp.JDM-2-1 and S.capitis showed reduction of 83% and 70% at concentration of 10 μg Cr(Ⅵ)/mL,respectively.The presence of an induced protein having molecular weight around 25 kDa in the presence of chromium points out a possible role of this protein in chromium reduction.The bacterial isolates can be exploited for bioremediation of hexavalent chromium containing wastes,since they seem to have the potential to reduce the toxic hexavalent form to its nontoxic trivalent form.     

Influences of working pressure on properties for TiO2 films deposited by DC pulse magnetron sputtering

TiO2 films were deposited at room temperature by DC pulse magnetron sputtering system.The crystalline structures,morphological features and photocatalytic activity of TiO2 films were systematically investigated by X-ray diffraction (XRD),atomic force microscopy and ultraviolet spectrophotometer,respectively.The results indicated that the working pressure was the key deposition parameters influencing the TiO2 film phase composition at room temperature,which directly affected its photocatalytic activity.With increasing the working pressure,the target self-bias decreases monotonously.Therefore,low temperature TiO2 phase (anatase) could be deposited with high working pressure.The anatase TiO2 films deposited with 1.4 Pa working pressure displayed the highest photocatalytic activity by decomposition of Methyl Orange solution,which the degradation rate reached the maximum (35%) after irradiation by ultraviolet light for 1 h.     

纳米TiO_2/SiO_2复合颗粒催化性能研究

为了提高纳米TiO2粒子的光催化性能和可回收性,采用溶胶-凝胶法制备了纳米TiO2/SiO2复合颗粒。利用XRD与比表面积测试仪,考察了热处理温度对复合颗粒的比表面积和其中纳米TiO2的粒度与晶型的影响情况,发现纳米TiO2的锐钛矿型转变温度由常规的350℃升高到600～700℃。研究了不同热处理温度的复合颗粒、不同Ti/Si比及其添加量对其光催化性能的影响,发现700℃下热处理2h,Ti/Si比为1.5的复合颗粒对100mg/mL的甲基橙溶液的光催化性能最好,其最佳使用量仅约为1.5g/L。     

Au/SnO_2/TiO_2催化氧化CO性能的研究

通过煅烧制备TiO2,用浸渍法负载SnO2,沉积沉淀法负载Au,制备不同SnO2含量的Au/SnO2/TiO2催化剂。采用BET、SEM、XRD等手段对催化剂样品进行表征并考察煅烧温度、SnO2的添加量等对Au/SnO2/TiO2催化剂催化CO氧化活性的影响。结果表明:Au/SnO2/TiO2催化活性比Au/TiO2明显提高;海绵钛在400℃煅烧后负载10%SnO2和1%的Au催化活性较好,在124℃左右能使气体中含量为2.94%的CO基本完全转化。     

CeO_2/Fe_2O_3对高浓度苯酚废水微波诱导的氧化催化

对高浓度苯酚废水提出了用复合催化剂CeO2/Fe2O3进行微波诱导催化氧化的降解方法,并与单一催化剂Fe2O3的催化氧化效果进行了比较,对两者的表观反应动力学进行了分析,结果表明复合催化剂的催化效果比单一催化剂的催化效果高15%以上,其主要原因是CeO2/Fe2O3复合物具有很强的催化能力和较高的干电流变活性,有利于电子的迁移和羟基自由基·OH的形成,从而有利于苯酚的氧化降解。     

钻井废液的O_3/H_2O_2深度氧化处理研究

针对钻井废液COD高,成分复杂,难降解的特点,对经过破胶分离后的废水进行O3预氧化-中间混凝-O3/H2O2深度氧化处理工艺,考察了处理过程中pH值、O3与H2O2的加量、反应时间等。结果表明,当体系pH值为12,O3流量0.2m3/h,H2O2的加量700mg/L,反应时间50min时,原水COD由1462mg/L降至142mg/L,去除率高达90.28%。