Decomposition of 2,2',4,4',5,5'-hexachlorobiphenyl with iron supported on an activated carbon from an ion-exchange resin

An activated carbon (AC) containing a high concentration (374 mg g⁻¹) of Fe was prepared by carbonization of an ion-exchange resin. To examine its chemical reactivity as a catalyst to decompose 2,2′,4,4′,5,5′-hexachlorobiphenyl (PCB-153), the decomposition parameters of temperature and time were varied under air or N₂. Decomposition at 350 °C was achieved within 15 min under air and 30 min under N₂, and the efficiency of PCB-153 decomposition was 99.7% and 98.0%, respectively. An analysis of inorganic chloride ions revealed that PCB-153 was mineralized effectively during the decomposition. The Brunauer-Emmett-Teller (BET) surface area and pore volume of the AC were measured to assess the adsorption capacity before and after the decomposition. The differences between decomposition under air and N₂ reflected the differences in the BET surface and pore volume measurements. A decomposition pathway was postulated, and the reactive characteristics of chlorine atoms loaded on the benzene rings followed the order of para > meta > ortho, which agrees with the calculated results from a density functional theory study.     

Influences of redox transformation, metal complexation and aggregation of fulvic acid and humic acid on Cr(VI) and As(V) removal by zero-valent iron

This study investigated the removal kinetics and mechanisms of Cr(VI) and As(V) by Fe(0) in the presence of fulvic acid (FA) and humic acid (HA) by means of batch experiments. The focus was on the involvements of FA and HA in redox reactions, metal complexation, and iron corrosion product aggregation in the removal of Cr(VI) and As(V) removal by Fe(0). Synthetic groundwater was used as the background electrolyte to simulate typical groundwater. The results showed faster Cr(VI) removal in the presence of HA compared to FA. Fluorescence spectroscopy revealed that no redox reaction occurred in the FA and HA. The results of the speciation modeling indicate that the free Fe(II) concentration was higher in the presence of HA, resulting in a higher removal rate of Cr(VI). However, the removal of As(V) was inhibited in the HA solution. Speciation modeling showed that the concentration of dissolved metal-natural organic matter (metal-NOM) complexes significantly affected the aggregation of the iron corrosion products which in turn affected the removal of As(V). The aggregation was found to be induced by gel-bridging of metal-NOM with the iron corrosion products. The effects of metal-NOM on the aggregation of the iron corrosion products were further confirmed by TEM studies. Larger sizes of iron corrosion products were formed in the FA solution compared to HA solution. This study can shed light on understanding the relationships between the properties of NOM (especially the content of metal-binding sites) and the removal of Cr(VI) and As(V) by Fe(0).     

Zero-valent iron and iron oxide-coated sand as a combination for removal of co-present chromate and arsenate from groundwater with humic acid

The combination of zero-valent iron (Fe⁰) and iron oxide-coated sand (IOCS) was used to remove Cr(VI) and As(V) from groundwater in this study. The efficiency and the removal mechanism of Cr(VI) and As(V) by using this combination, with the influence of humic acid (HA), were investigated using batch experiments. Results showed that, compared to using Fe⁰ or IOCS alone, the Fe⁰-IOCS can perform better on the removal of both Cr(VI) and As(V). Metal extraction studies showed that As(V) was mainly removed by IOCS and iron corrosion products while Cr(VI) was mainly removed by Fe⁰ and its corrosion products. Competition was found between Cr(VI) and As(V) for the adsorption sites on the iron corrosion products. HA had shown insignificant effects on Cr(VI) removal but some effects on As(V) removal kinetics. As(V) was adsorbed on IOCS at the earlier stage, but adsorbed/coprecipitated with the iron corrosion products at the later stage.     

Assessment of aided phytostabilization of copper-contaminated soil by X-ray absorption spectroscopy and chemical extractions

Field plots were established at a timber treatment site to evaluate remediation of Cu contaminated topsoils with aided phytostabilization. Soil containing 2600 mg kg⁻¹ Cu was amended with a combination of 5 wt% compost and 2 wt% iron grit, and vegetated. Sequential extraction was combined with extended X-ray absorption fine structure (EXAFS) spectroscopy to correlate changes in Cu distribution across five fractions with changes in the predominant Cu compounds two years after treatment in parallel treated and untreated field plots. Exchangeable Cu dominated untreated soil, most likely as Cu(II) species non-specifically bound to natural organic matter. The EXAFS spectroscopic results are consistent with the sequential extraction results, which show a major shift in Cu distribution as a result of soil treatment to the fraction bound to poorly crystalline Fe oxyhydroxides forming binuclear inner-sphere complexes.     

酸碱改性对氧化铁脱硫剂脱硫性能影响的研究

通过酸碱改性制备了酸式和碱式2种不同表面性质的常温氧化铁脱硫剂,并采用FT-IR技术对其表面酸碱性质和净化硫化氢废气活性进行了研究.结果表明,表面酸碱件质不同的脱硫剂其脱硫反应行为也不同,在脱硫过程中硫化氢氧化生成的硫酸及亚硫酸会影响脱硫剂的表面酸碱性质,造成酸式脱硫剂的表面酸性更强,从而抑制了硫化氢分子在酸式脱硫剂表...     

改性纳米零价铁的制备及其去除水中的四环素

对聚乙烯吡咯烷酮(PVP-K30)改性纳米零价铁(NZVT)用于水中四环素(TC)的去除进行研究.通过XRD,TEM和BET对改性后的纳米铁性能进行表征.探讨不同反应条件对PVP-NZVI去除四环素的影响.实验结果表明,在制备过程中添加PVP-K30改性剂可以明显减小纳米铁颗粒粒径,增大比表面积,提高TC的去除率.当初...     

活性炭海绵动态膜生物反应器处理生活污水的研究

采用序批式活性炭海绵基材动态膜生物反应器处理模拟生活污水。在反应周期为6 h,好氧、厌氧时间比为2∶1,处理水量为18 L的条件下,讨论反应器及动态膜分别对COD、TN、NH3-N、TP的去除效果,并分析反应器中氮的去除机理。结果表明:活性炭海绵基材动态膜生物反应器对COD、TN、NH3-N和TP平均去除率分别为97.99%、84.24%、95.52%和78.94%,动态膜对COD、TN、NH3-N和TP平均去除率为8.96%4、.75%、1.30%和7.54%;好氧结束时,反应器中的氮主要以硝态氮形式存在,浓度稳定在16 mg/L左右,出水中的硝态氮和亚硝态氮平均含量相近,分别为4.10 mg/L和3.69 mg/L;滤饼层对浊度有很好的去除效果,稳定运行时出水浊度可降至2 NTU以下。     

用Fe3+掺杂锐钛矿型TiO2光催化剂降解孔雀石绿

以硫酸钛为原料,用水热法制备了Fe3+掺杂锐钛矿型TiO2(Fe3+ - TiO2)粉末,用扫描电子显微镜测定了试样的形貌.研究了自制的Fe3+ - TiO,光催化剂对孔雀石绿的光催化降解作用.实验结果表明,在孔雀石绿溶液质量浓度为2 mg/L、Fe3+ - TiO2加入量为1.616 g/L、Fe3+-TiO2中Fe...     

饮用水除砷材料吸附特性及影响因素分析

采用活性氧化铝、零价铁粉和载铁沸石作为吸附剂,通过静态吸附实验,研究3种饮用水除砷材料的吸附特性及影响因素。结果表明,在pH值为6.5,砷浓度为1 mg/L,投加量为2 g/L,25℃恒温的条件下,活性氧化铝、零价铁粉和载铁沸石分别在90 min、150 min和90 min达到吸附平衡状态,均较好符合langmuir等温吸附模型,对砷的最大吸附容量依次为7.3、3.3和3.9 mg/g。pH值和竞争性阴离子对砷的去除均有显著影响。降低溶液pH值能明显提高3种材料的除砷效率;水中磷酸根离子的存在,能够明显降低活性氧化铝和零价铁粉的除砷效率;水中硅酸根离子的存在,能够明显降低零价铁粉和载铁沸石的除砷效率。