烟气脱硫系统的吸收塔及停留时间

介绍了烟气脱硫系统中三种主要的吸收塔类型,及烟气在吸收塔中停留时间和喷淋吸收区高度的计算方法。简述了液气比与气速、烟气中SO2含量的关系,并列举了喷淋塔、动力波塔和平流塔等工程实例。     

SDA脱硫工艺在烧结烟气脱硫中的应用

介绍了沙钢集团4号360 m2烧结机全烟气脱硫项目的工艺选择、脱硫原理、工艺流程及投产后生产情况,通过对生产后运行分析,认为旋转喷雾干燥法(SDA)作为一种新型的脱硫工艺,适合作为烧结烟气脱硫的主工艺进行推广。     

Effect of placement angles on wireless electrocoagulation for bipolar aluminum electrodes

A new electrocoagulation process based on bipolar aluminum electrode is proposed. The placement angles of bipolar electrode are key parameter. The numerical simulations support the experimental results. We in our previous study reported the wireless electrocoagulation (WEC) based on bipolar electrochemistry for water purification. One of the most important advantages of WEC is the omission of ohmic connection between bipolar electrode (BPE) and power supply, and thus the electrochemical reactions on BPE are driven by electric field in solution induced by driving electrodes. In this study, the impact of placement angle of bipolar aluminum electrode on WEC was investigated to provide a detailed analysis on the correlations between the bipolar electrode placement angle and bipolar electrocoagulation reactions. The results showed that the WEC cell with a horizontal BPE placed at 0° produced the maximum dissolved aluminum coagulant, accounting for 71.6 % higher than that with a vertical one placed at 90°. Moreover, the finite element simulations of current and potential distribution were carried out along the surface of BPE at different placement angles, revealing the mechanism of different BPE placement angles on aluminum dissolution rates in WEC system.     

考虑峰后软化的圆形巷道稳定性分析及工程应用

为获得更准确的巷道围岩应力分布和变形特征,基于统一强度理论,考虑围岩塑性软化和中间主应力的影响,引入塑性软化参数,推导出巷道围岩弹塑性区应力、塑性区范围和位移的表达式。通过算例分析,得到塑性软化系数和中间主应力等相关参数对巷道围岩应力分布、塑性区半径和位移的影响规律。研究结果表明:随内摩擦角软化系数和黏聚力软化系数的增大,围岩塑性区半径和位移呈现先急剧后缓慢的减小趋势;中间主应力系数对巷道围岩弹塑性应力有着显著影响,中间主应力系数越大,围岩塑性区半径和位移越小。     

高速气固两相流作用下的煤化工管材冲蚀磨损行为研究

为解决煤化工业中节流阀突扩口高速气固两相流对管壁材质的冲蚀磨损问题,利用基于激波管原理驱动的气固两相流冲蚀实验装置,试验研究冲击角度、温度对煤化工管材(10#、AISI304)的冲蚀磨损规律。研究结果表明:10#、AISI304管材的冲蚀率将随着冲击角度的增加而先增大后减小;室温下,10#、AISI 304钢的最大冲蚀率均出现在15°~30°区间;随着温度的升高,10#的最大冲蚀率出现在30°~45°区间,AISI304最大冲蚀率出现在30°。10#在30°,45°冲击角度下冲蚀磨损率会随温度上升显著上升,在15°冲击角度下冲蚀磨损率反而会随温度上升而下降。AISI 304在15°,30°,45°冲击角度下,冲蚀磨损率均会随温度上升而上升;在特定条件下,10#管材的冲蚀性能将优于AISI304。     

半干法烟气脱硫系统中喷水调节阀的控制及选型

喷水流量的控制对半干法脱硫效率至关重要,通过分析喷水调节阀的控制对吸收塔温度的影响,表明该阀流量特性选择的重要性,并提出喷水调节阀的选型及计算方法。     

大豆蛋白粉喷雾干燥塔尾气余热的回收与利用

针对大豆蛋白粉生产过程中喷雾干燥塔尾气温度较高,有回收利用价值的现实,也针对目前的节能需求,对现有的喷雾干燥塔的尾气排放部分进行改造,设计一个片状空气预热器,以利用高温的尾气与系统的进气做热交换,实现热量再利用,降耗和提高蛋白粉产率的目的,并对投资收益进行了分析。     

Simulation of Reflected and Scattered Laser Radiation for Designing Laser Shields

This paper presents a computer simulation of reflected and scattered laser radiation for calculating the angle of laser shields performed with the Laser Shield Solver computer program. The authors describe a method of calculating the shield angle for laser shields which protect workers against reflected and scattered laser radiation and which are made from different materials. The main assumptions of the program, which calculates and simulates reflected laser radiation from any material and which can be used for designing shield angles, are presented. Calculations are compared with measurements of reflected laser radiation. The results for one type of laser and different materials which interacted with a laser beam showed that the Laser Shield Solver was an appropriate tool for designing laser shields and its simulations of reflected laser radiation distribution have practical use.     

地铁站内空气幕防烟效果的数值模拟研究

地铁站内站台层发生火灾时,站台层的烟气会通过站台层到站厅层的楼扶梯蔓延至站厅层。为了研究楼扶梯口处设置空气幕对站台层烟气的阻挡效果,进行了数值模拟研究。主要研究空气幕的出口风速,出口射流角度对烟气的阻挡效果。设置的空气幕风速有3m/s,4m/s,5m/s,10m/s;设置的角度有0°,15°,30°。通过模拟对比空气幕前后温度变化,得出风幕风速为4m/s或者5m/s时即可较好阻挡烟气。角度为15°的空气幕比0°和30°的空气幕挡烟效果好。     

EMC用V型人工电源网络的解析

本文分别对理想和实用的V型人工电源网络的阻抗(模和相位角)、隔离度进行计算和分析,并将其与某公司生产的ENV216型人工电源网络的测试参数进行比较,验证了ENV216型人工电源网络是完全符合标准要求的,加深了对电源端传导发射测试的理解。