同步脱氮除磷系统中两种颜色好氧颗粒污泥的微生物群落特征

为研究同步脱氮除磷系统中出现的WG（白色好氧颗粒污泥）外形特点及微生物群落特征,探究其成因,利用SEM（扫描电子显微镜）表征了系统中的WG与YG（黄色好氧颗粒污泥）的微观形态,并采用Illumina HiSeq 2500高通量测序平台对两种好氧颗粒污泥中细菌与真菌的群落组成进行研究.结果表明:WG结构疏松外形不规则,颗粒表面分布大量杆菌;而YG饱满紧实轮廓清晰,颗粒表面分布大量球菌.WG与YG的细菌群落组成相似,但真菌组成差异较大.与YG相比,WG具有更高的细菌和真菌多样性.变形菌门（Proteobacteria）和拟杆菌门（Bacteroidetes）为WG和YG中的细菌优势门,其在WG中的相对丰度分别为68.85%和26.61%,在YG中的相对丰度分别为82.52%和12.30%.Candidatus competibacter、Candidatus accumulibacter和Chiayiivirga为WG中的优势属,相对丰度分别为22.13%、8.95%和7.37%;Candidatus competibacter、Chiayiivirga和Xanthomonas为YG中的优势属,相对丰度分别为47.94%、6.95%和7.06%.子囊菌门（Ascomycota）和Rozellomycota分别为WG与YG中真菌优势门,其在两个样品中的相对丰度分别为50.10%和81.77%.在属水平,WG中存在大量青霉属（Penicillium）和假丝酵母属（Candida）等丝状真菌,为WG的形成提供了框架.研究显示,当YG破碎成为小菌胶团后,附着在真菌框架上,造成了WG的快速形成,同时WG中Candidatus competibacter的相对丰度较低,使其外形疏松、透光性较好,呈现出白色.      

Effect of lubricant sulfur on the morphology and elemental composition of diesel exhaust particles

This work investigates the effects of lubricant sulfur contents on the morphology, nanostructure, size distribution and elemental composition of diesel exhaust particle on a light-duty diesel engine. Three kinds of lubricant (LS-oil, MS-oil and HS-oil, all of which have different sulfur contents: 0.182%, 0.583% and 1.06%, respectively) were used in this study. The morphologies and nanostructures of exhaust particles were analyzed using high-resolution transmission electron microscopy (TEM). Size distributions of primary particles were determined through advanced image-processing software. Elemental compositions of exhaust particles were obtained through X-ray energy dispersive spectroscopy (EDS). Results show that as lubricant sulfur contents increase, the macroscopic structure of diesel exhaust particles turn from chain-like to a more complex agglomerate. The inner cores of the core-shell structure belonging to these primary particles change little; the shell thickness decreases, and the spacing of carbon layer gradually descends, and amorphous materials that attached onto outer carbon layer of primary particles increase. Size distributions of primary particles present a unimodal and normal distribution, and higher sulfur contents lead to larger size primary particles. The sulfur content in lubricants directly affects the chemical composition in the particles. The content of C (carbon) decreases as sulfur increases in the lubricants, while the contents of O (oxygen), S (sulfur) and trace elements (including S, Si (silicon), Fe (ferrum), P (phosphorus), Ca (calcium), Zn (zinc), Mg (magnesium), Cl (chlorine) and Ni (nickel)) all increase in particles.     

人为干扰对小兴安岭森林湿地土壤碳组分和酶活性的影响

以小兴安岭落叶林沼泽湿地为研究对象,对比研究皆伐地、火烧地和落叶松湿地土壤碳组分和酶活性.结果表明:(1)3种湿地类型土壤SOC含量表现为对照地显著高于皆伐地和火烧地(p0.05),在0~10 cm土层中皆伐地与对照地相比降低了58.38%,火烧地与对照地相比降低了61.96%.皆伐地与火烧地在不同土层的土壤中SOC含量差异不显著(p0.05);DOC含量对照地显著高于皆伐地和火烧地(p0.05).在0~10cm土层中火烧地DOC含量是皆伐地的1.99倍,两者差异不显著(p0.05);不同干扰方式对土壤MBC含量影响的差异主要表现在0~10 cm的土层土壤,对照地分别比皆伐地和火烧地高23.13%和95.79%(p0.05).在不同的土层中皆伐地MBC含量均大于火烧地,与SOC含量的变化趋势一致.(2)与对照地相比,皆伐地与火烧地0~10 cm土层的土壤蔗糖酶活性分别降低了45.59%和36.76%,脲酶活性显著降低了18.22%和55.69%(p0.05),蛋白酶活性降低了19.65%和17.34%,淀粉酶活性降低了6.29%和10.69%.土壤碳组分和酶活性在垂直方向上均表现为随着土层深度增加而减小.皆伐和火烧造成森林湿地土壤碳组分和酶活性降低.     

Ti/SnO_2-Sb阳极-空气阴极电催化降解染料废水

为解决电化学法处理高盐染料废水存在的能耗大、成本高等问题,分别采用溶胶-凝胶法和辊压法制备Ti/SnO_2-Sb阳极和空气阴极,构建了Ti/SnO_2-Sb阳极-空气阴极双极体系(TSSA-ADC)。甲基橙(MO)作为高盐染料废水的典型污染物,考察了电流强度、MO浓度、电解液浓度和初始p H对TSSA-ADC体系和TSSA单阳极体系降解MO的影响。结果表明:与TSSA单阳极体系相比,TSSA-ADC体系具有更好的抗有机负荷冲击、抗盐分冲击、抗酸碱波动能力,能够维护酸碱平衡防止硬度离子结垢。最佳反应条件为电流强度为0.030 A,电解液浓度为3%,MO浓度为100 mg/L,初始pH=6。以MO去除率达到98%为基准,TSSA-ADC体系比TSSA体系可节能74.26%。     

碳排放影响因子与碳足迹文献综述:基于研究方法视角

从研究方法的角度出发,对近年来国内外碳排放影响因子及碳足迹的相关研究进行文献综述。根据碳排放影响因子的研究方法—情景分析法、因素分解法中的指数分解法以及其他计量模型,介绍了国内外关于碳排放影响因子的研究现状,最后对方法进行归类和对比。根据碳足迹研究方法—投入产出法、生命周期评价法、IPCC法以及其他模型,分析了国内外关于碳足迹的研究进展。最后通过总结,对碳排放和碳足迹的未来研究方向进行了展望。     

污泥基生物炭对垃圾渗滤液的吸附性能研究

以城镇污水处理厂剩余污泥为原料制备生物炭,研究了其对垃圾渗滤液中污染物吸附性能,旨在探索市政污泥综合利用方法和"以废治废"的治理技术途径。结果表明:当生物炭投加量为20 g/L时,垃圾渗滤液的COD和TP去除效果最佳,去除率分别为36.76%和78.36%,NH_4~+-N去除率随生物炭投加量增加而增加;上述三者不同污染物去除的最佳反应接触时间分别为50 min、30 min和≥2 h;生物炭对重金属离子的吸附机理主要表现为离子交换作用。     

我国城镇化进程中碳排放影响因素的实证研究

利用1980—2013年间的城镇人口与碳排放数据,选取城镇化进程中影响碳排放的城镇化水平、城镇建设用地面积、第三产业增加值、人均可支配收入、城镇人均绿化面积等因素,实证分析了城镇化对我国碳排放的影响程度,并利用格兰杰夫因果关系与误差修正模型分析了二者的因果关系与时间效应。最后,从降低工业碳排放、加快低碳城镇化试点建设、推进低碳社区发展,促进新能源发展等方面提出了相关建议。     

碳素纤维在近岸海洋污染物磷酸盐、硅酸盐处理中的应用

对碳素纤维进行氧化改性,利用改性后的碳素纤维处理近岸污染海水,重点研究了改性碳素纤维对海水中活性磷酸盐和活性硅酸盐的吸附作用。考察了碳素纤维液相改性时间、碳素纤维投加量、活性磷酸盐初始浓度、活性硅酸盐初始浓度、吸附时间、海况、pH值等单因素对近岸海洋污染物磷酸盐、硅酸盐吸附效果的影响。研究结果表明:改性碳素纤维对硅酸盐的吸附效果较好,去除率可达70%,对活性磷酸盐的去除率为31%左右。通过正交实验确定改性碳素纤维材料修复模拟近岸海水的优化条件为:碳素纤维改性时间为1.5 h,投加量为0.01 g,硅酸盐初始浓度为3mg/L,磷酸盐初始浓度为20 mg/L,海况为3级,pH值为8,吸附时间为3 h。在此条件下,碳素纤维对磷酸盐的去除率可达31.06%,硅酸盐去除率可达70.88%。     

On the effect of Fe(III) on proliferation of Microcystis aeruginosa at high nitrate and low chlorophyll condition

The impact of Fe concentrations on the growth of Microcystisaeruginosa in aquatic systems under high nitrate and low chlorophyll conditions was studied. The responses of cell density, total and cell chlorophyll-a intracellular Fe content and organic elemental composition of M. aeruginosa to different concentration gradients of Fe(III) in the solutions were analysed. The results showed that the proliferation speeds of M. aeruginosa were: (1) decelerated when the Fe(III) concentration was lower than 50 μg/L in the solutions, (2) promoted and positively related to the increase of Fe(III) concentration from 100 to 500 μg/L in the solutions over the experimental period, and (3) promoted in the early stage but decelerated in later stages by excess adsorption of Fe by cells when the Fe(III) concentration was higher than 500 μg/L in the solutions. The maximum cell density, total and cell chlorophyll-a were all observed at 500 μg Fe(III)/L concentration. The organic elemental composition of M. aeruginosa was also affected by the concentration of Fe(III) in the solutions, and the molecular formula of M. aeruginosa should be expressed as C_7–7.5H₁₄O_0.8–1.3N_3.5–5 according to the functions for different Fe(III) concentrations. Cell carbon and oxygen content appeared to increase slightly, while cell nitrogen content appeared to decrease as Fe(III) concentrations increased from 100 to 500 μg/L in the solutions. This was attributed to the competition of photosynthesis and nitrogen adsorption under varying cell Fe content.     

Mesoporous carbon nanomaterials induced pulmonary surfactant inhibition, cytotoxicity, inflammation and lung fibrosis

Environmental exposure and health risk upon engineered nanomaterials are increasingly concerned. The family of mesoporous carbon nanomaterials(MCNs) is a rising star in nanotechnology for multidisciplinary research with versatile applications in electronics,energy and gas storage, and biomedicine. Meanwhile, there is mounting concern on their environmental health risks due to the growing production and usage of MCNs. The lung is the primary site for particle invasion under environmental exposure to nanomaterials. Here, we studied the comprehensive toxicological profile of MCNs in the lung under the scenario of moderate environmental exposure. It was found that at a low concentration of 10 μg/mL MCNs induced biophysical inhibition of natural pulmonary surfactant. Moreover, MCNs at similar concentrations reduced viability of J774 A.1 macrophages and lung epithelial A549 cells.Incubating with nature pulmonary surfactant effectively reduced the cytotoxicity of MCNs.Regarding the pro-inflammatory responses, MCNs activated macrophages in vitro, and stimulated lung inflammation in mice after inhalation exposure, associated with lung fibrosis.Moreover, we found that the size of MCNs played a significant role in regulating cytotoxicity and pro-inflammatory potential of this nanomaterial. In general, larger MCNs induced more pronounced cytotoxic and pro-inflammatory effects than their smaller counterparts. Our results provided valuable information on the toxicological profile and environmental health risks of MCNs, and suggested that fine-tuning the size of MCNs could be a practical precautionary design strategy to increase safety and biocompatibility of this nanomaterial.