Evaluation of C18 solid‐phase extraction cartridges for the isolation of select pesticides and metabolites

Abstract

Nine different C₁₈ solid‐phase extraction (SPE) cartridges were evaluated for their efficiency at extracting nine pesticides and two s‐triazine metabolites from spiked deionized water samples. The SPE cartridges were found to contain nitrogen (N) and/or phosphorus (P) contaminants and varied in their extraction efficiency for certain pesticides and metabolites. Four of the nine SPE cartridges gave acceptable (70 to 120%) pesticide and metabolite recovery percentages, while five cartridges had marginal (50 to 70%) to poor (< 50%) recoveries. Statistical analyses showed that the poor to marginal recoveries found for three compounds could not be explained by considering several indigenous chemical and physical traits of the cartridge. It is suggested that proper SPE cartridge selection for pesticide recovery should be evaluated using several different cartridges.     

Solid‐phase extraction and GC analyses of select agricultural pesticides and metabolites in stream water

Abstract

The occurrence of agricultural pesticides in surface waters around the USA has created a concern over the status of safe drinking water. Solid‐phase extraction (SPE) or liquid‐liquid extraction (LLE) is usually employed to concentrate trace levels of pesticides in water samples to concentrations that are measurable with advanced chromatographic instruments. We describe here a SPE and capillary gas chromatographic (GC) procedure to extract and concentrate trace levels of select agricultural pesticides and metabolites from stream water. Our SPE and GC method provides high sensitivity, with recoveries between 85% to 95%, and high reproducibility for 9 of the pesticides studied. The described method provided marginal recoveries of 19 and 60% for the atrazine metabolites.     

顶空固相微萃取-色谱质谱联用测定饮用水中二甲基异冰片和土味素

研究了顶空固相微萃取-气相色谱质谱联用测定饮用水中二甲基异冰片和土味素的方法。结果表明,当选用聚二甲基硅氧烷(PDMS)萃取纤维萃取头,萃取温度为60℃,萃取时间为40min时,得到二甲基异冰片标准曲线方程为y=122.59+157.76x,相关系数(R)0.9998;土味素的标准曲线方程为y=14.847+180.99x,相关系数(R)0.9999;检出限为0.1ng/L,相对标准偏差在0.99%～4.05%之间,加标回收率86.4%～109.5%。     

Environmental monitoring of complex hydrocarbon mixtures in water and soil samples after solid phase microextraction using PVC/MWCNTs nanocomposite fiber

A novel nanocomposite based on incorporation of multiwalled carbon nanotubes (MWCNTs) in polyvinyl chloride (PVC) was prepared. Proposed nanocomposite was coated on stainless steel wire by deep coating. Composition of nanocomposite was optimized based on results of morphological studies using scanning electron microscopy. The best composition (83% MWCNTs:17% PVC) was applied as a solid phase microextraction fiber. Complex mixture of aromatic (BTEX) and aliphatic hydrocarbons (C₅–C₃₄) were selected as model analytes, and performance of proposed fiber in extraction of the studied compounds from water and soil samples was evaluated. Analytical merits of the method for water samples (LODs = 0.10–1.10 ng L⁻¹, r² = 0.9940–0.9994) and for soil samples (LODs = 0.10–0.77 ng kg⁻¹, r² = 0.9946–0.9994) showed excellent characteristics of it in ultra trace determination of petroleum type environmental pollutants. Finally, the method was used for determination of target analytes in river water, industrial effluent and soil samples.     

纳米TiO2/CNTs复合材料的制备及其光学性质

TiO2在碳纳米管上的复合材料可以增加材料的光催化性能,已成为新的研究热点.本文采用低温液相法成功地合成了TiO2/CNTs复合材料,并用TEM、XRD和UV-vis对材料进行了表征,结果表明,TiO2很好地分散在CNTs上,具有显著的催化效果,有很好的应用前景.     

闭环电控三元催化技术对化油器型车辆排放的控制

针对城市汽车尾气治理及化油器型车辆的排放现状 ,指出开发和运用闭环电控三元催化技术是目前解决城市化油器型车辆排放问题及时可行的过渡措施 ,并对电控三元催化技术的应用提出了建议与要求。     

Mathematical Modeling of Column and Field Dense Nonaqueous Phase Liquid Tracer Tests

Mathematical models for the simulation of dense nonaqueous phase liquid tracer tests (DTTs) in laboratory columns and in the field are developed and examined. The DTT technique is a means of estimating the quantity of dense nonaqueous phase liquid (DNAPL) in a domain of interest in an aquifer. The two-dimensional field DTT model uses the Method of Principal Directions and an asymmetrical upwind algorithm for describing advective transport. Both models include diffusion transport of tracer into and from low-permeability porous structures such as clay lenses, as well as the mass transport kinetics of partitioning tracer to and from the DNAPL droplets. The dependence of the effluent tracer concentration curves on the parameters of the models is explored, and conclusions are drawn regarding the applicability of, and several possible problems with, the DTT technique. Model results indicate that the DTT performs well at locating distributed droplets of DNAPL, but is unlikely to be useful in the assessment of pooled DNAPL.     

13C在草原土壤呼吸区分中的应用

区分草原土壤呼吸的主要目的在于准确估算草原生态系统土壤碳蓄积和碳源、 汇潜力,为预测气候变化提供科学依据。论文主要论述了稳定同位素¹³C在草原土壤呼吸区分方面的应用。主要在以下几个方面进行了阐述:①碳同位素区分土壤呼吸的两种主要标记方法——脉冲标记法和持续标记法,其中脉冲标记法包括单次脉冲标记法和重复脉冲标记法,持续标记法包括FACE实验标记法和¹³C自然丰度标记法,也介绍了利用核爆产生的¹⁴C标记;②应用碳稳定同位素区分土壤呼吸的理论依据和计算方法;③土壤呼吸稳定同位素组成的取样方法和测定,包括静态箱-Keeling Plot法、 静态箱平衡状态法和动态箱连接红外分析仪法等;④指出了减小静态箱-Keeling Plot法测定土壤呼吸碳同位素值的误差需采取的措施。     

建筑火灾区域模拟竖孔流动的计算

本文根据建筑火灾双层区域模拟思想，给出其常微分控制方程组，并分析了其压力求解方法，然后，运用伯努力利方程推导了相邻房间通过矩形竖孔（门或窗）的质量流率计算公式，还讨论了竖孔流动中性面产生条件。在此基础上，结合一两房间、两孔建筑中烟气运动实例，运用Ｃ．Ｗ．Ｇｅａｒ刚性稳定算法对火灾发展及烟气流动过程进行了数值模拟；给出各竖孔中性面位置、数量和各主环境之间通过竖孔的质量流率；还给出各房间气体平均温升、     

HNO_3在气相及SiO_2表面的紫外光解反应

利用紫外及红外吸收光谱等分析手段对365 nm光照下HNO3在气相与SiO2表面的光解反应进行了研究.考察了HNO3浓度、光照时间、相对湿度等条件对反应的影响.结果表明:随着HNO3浓度及光照时间的增加,光解产生的NO2和NO浓度均呈指数增加;无水汽情况下,400 Pa的HNO3光解45 min后,产生NO2及NO浓度比气相光解产生的分别高约3及1.7倍.HNO3光解产生的HONO的浓度随相对湿度的增加而呈线性增加,在SiO2颗粒物表面光解产生的NO2浓度随着相对湿度的增加而减少,而NO浓度则随之增大.400 Pa的HNO3光照45 min后,SiO2表面光解产生的HONO浓度是气相光解的3倍、SiO2表面暗反应的约30倍.