模拟医疗废物在TG-DTA-FTIR上的热失重特性研究

在热重-差热分析仪上对模拟医疗废物分别在氮气和空气气氛中不同升温速率下加热的热失重行为进行了研究,并对升温速率和不同气氛对其热失重行为的影响进行了探讨.结果表明,随升温速率的提高,模拟医疗废物在2种气氛下热失重时挥发分初析出温度（T_s）向高温方向偏移、失重速率峰值（DTG_max）显著增大;在氮气气氛下,物料热失重时有2个失重峰,前后2个峰的失重率分别为31%和59%左右,在空气气氛下,有3个失重峰,前2个峰失重率分别在44%～59%和31%～46%之间.同时,结合同步傅立叶变换红外光谱仪对各个条件下的气体产物进行了定性分析,并对其中的CO、CO₂、H₂O和CH₄进行了定量分析.实验发现,模拟医疗废物在2种气氛下热失重主要阶段的产物种类相似,都检测到了CO₂、CO、烷烃类、醛类、羧酸、醇类和烯烃的特征吸收峰.并且,结果显示升温速率和气氛条件对CO、CO₂、H₂O和CH₄的生成量都有影响.在热失重的主要阶段,水分含量随加热时间变化曲线上显示1个向下的峰,说明载气中原有水分参与了反应.     

北京餐饮源排放细粒子理化特征及其对有机颗粒物的贡献

调研了北京餐饮业发展现状,通过在线监测、采样分析等手段研究北京4家不同烹调方式的餐馆所排放颗粒物的质量浓度、粒径分布、形貌特征、化学组分,并初步估算餐饮源排放细粒子对北京细粒子中颗粒有机物的贡献.结果表明,餐馆的原料、烹饪过程、油烟去除装置以及客流量都会影响餐馆所排放颗粒物的物理、化学性质.样本餐馆营业期间排放颗粒物PM_{2 .5}质量浓度是当日环境大气PM_{2 .5}质量浓度的8～35倍,PM_{1 .0}在PM_{2 .5}的质量浓度中约占50%～85%.餐饮源排放颗粒物多以固态和液态颗粒物形貌存在,化学组分质量百分数由多到少依次是有机物、无机离子和元素碳,分别占到PM_{2 .5}质量浓度的70%左右、5%～11%和小于2%.初步估计结果表明,北京餐饮源排放细粒子对有机颗粒物的贡献和交通源的排放相当,成为北京细粒子有机颗粒物的主要来源之一.认识餐饮源排放颗粒物的理化性质,可以为改善北京空气质量和保证居民身体健康提供数据支持.     

地质地球化学特性对四川名优茶品质的影响

通过对四川名优茶产区地质、地球化学特征的研究,认为茶园海拔高度、土壤结构、土壤元素组合等对茶叶的品质具有深刻的影响。进一步研究了茶叶的感官指标:外形、汤色、香气、滋味、叶底与茶产地地质地球化学特征的关系,认为营养元素和有毒有害元素的丰缺不仅关系到茶叶的长势和饮用健康性,更是从口味上造成了影响。     

安徽中北部河流沉积物的特征与多环芳烃分布

通过对安徽省中北部6条河流沉积物样品的粒径、矿物组分和有机质含量的测试,并应用气相色谱质谱联用仪测定了样品中萘、二氢苊、苊、芴、菲、蒽、荧蒽、芘、苯并[a]蒽、、苯并[a]芘和二苯并[a,h]蒽等12种多环芳烃的含量,分析了研究区河流沉积物的特征和多环芳烃分布。研究结果表明:位于安徽省中北部的淮河南北岸支流沉积物粒径和矿物组分具有不同特征;就PAHs总量来看,北岸支流平均值为313.3ng/g,南岸支流平均为112.8ng/g,差异比较明显,南岸支流沉积物中大多数多环芳烃的平均含量都低于北岸支流(蒽和菲除外,二苯并[a,h]蒽未检出);而有机质的含量,南北岸支流总体无明显差异(含量在0.55%至1.83%之间),但单条河流的分布呈沿水流方向自中上游至下游逐渐降低。     

钙基CO2吸收剂循环特性影响因素分析

利用小型固定床反应器研究了循环煅烧/碳酸化过程中,煅烧温度、煅烧气氛、碳酸化温度、压力等对钙基CO2吸收剂循环特性的影响,确定了影响钙基CO2吸收剂循环特性的主要因素。结果表明:随循环次数的增加,吸收剂的转化率明显下降,循环10次后,其基本都下降到20%左右;煅烧温度是影响吸收剂循环特性最重要的因素;煅烧气氛中存在CO2对吸收剂活性保持不利;吸收压力和温度也对吸收剂的循环特性有一定影响,较高的吸收压力和吸收温度有利于吸收剂转化。     

西藏自治区措勤县日阿布洗铜多金属矿床地质特征及成因类型

西藏自治区日阿布洗铜多金属矿位于冈底斯山脉北缘斑岩型铜矿成矿带,含矿斑岩体为晚喜山期花岗斑岩,具全岩矿化特征,斑岩体与构造蚀变岩带形成矿床。研究表明,地表和浅部出露含矿斑岩体只是岩枝,矿区剥蚀程度低,主斑岩体尚未出露,深部找矿潜力巨大。经深部钻孔工程及地表槽探验证,矿体品位和厚度沿走向和倾向变化系数较小,伴生组份较多,并对其资源量进行了初步估算。喜山晚期第一阶段花岗斑岩侵入体是主要成矿物质来源,矿床成因类型应为斑岩型铜矿床。     

紫色丘陵区不同弃土弃渣下垫面入渗特征及影响因素

采用环刀法研究了紫色丘陵区不同碎石含量弃土弃渣下垫面的入渗特征及影响因素.结果表明,不同弃土弃渣下垫面入渗性能随碎石含量的增加而差异显著,其中,碎石含量为40%的弃土弃渣下垫面初始入渗率、稳定入渗率及平均入渗率分别是土质弃渣下垫面的1.30、1.13和1.54倍.不同下垫面初始入渗率和稳定入渗率与弃渣初始含水率、容重呈显著负相关,与下垫面总孔隙度、非毛管孔隙度呈显著正相关.其中,初始入渗率与初始含水率相关系数在-0.689~-0.912之间,稳定入渗率与容重相关系数为-0.745~-0.999,且稳定入渗率随非毛管孔隙度增加而显著提高.Horton模型对不同弃土弃渣下垫面入渗率与时间拟合的可决系数在0.899以上,且Horton模型计算入渗率与实测入渗率的相对误差在0.07%~6.60%之间,是紫色丘陵区分析不同弃土弃渣下垫面入渗过程的适宜性模型.研究结果可为紫色丘陵区弃土弃渣水土流失量预测和评价提供技术参数.     

滴水湖及其水体交换区沉积物和土壤中PAHs的分布及生态风险评价

采用GC-MS联用技术分析了滴水湖及其水体交换区23个表层沉积物和土壤中16种多环芳烃(PAHs)的含量,探讨其分布特征及来源并对其生态风险进行评价.结果表明,滴水湖沉积物中16种PAHs含量范围是11.49~157.09 ng·g-1,平均含量为66.60 ng·g-1,湖区沉积物中PAHs含量比入湖区低,但比出湖区高.湖区外的沉积物和土壤中PAHs组成主要以中、高分子量PAHs(4环、5~6环)为主,而湖区内表层沉积物中PAHs组成则以低分子量PAHs(2~3环)和高分子量PAHs(5~6环)为主.通过特征化合物分子比值法、主成分分析及多元线性回归模型判源,表明湖区外沉积物和土壤中PAHs来源主要为燃烧源,而湖区内沉积物中PAHs来源为燃烧源和石油类产品泄漏的混合来源.生态风险评价显示,滴水湖及其水体交换区沉积物和土壤中PAHs生态风险较低.     

Insights into multisource sludge distributed in the Yangtze River basin, China: Characteristics, correlation, treatment and disposal

Sludge is the by-product of wastewater treatment process. Multisource sludge can be defined as sludge from different sources. Based on the sludge properties of five typical cities in the Yangtze River basin, including Jiujiang, Wuhu, Lu'an, Zhenjiang and Wuhan, this study investigated and summarized the characteristic variations and distribution differences of multiple indicators and substances from municipal sludge, dredged sludge, and river and lake sediments. The results demonstrated pH of multisource sludge was relatively stable in the neutral range. Organic matter and water content among municipal sludge were high and varied considerably between different wastewater treatment plants. Dredged sludge had an obviously higher sand content and wider particle distribution, which could be considered for graded utilization depending on its size. The nutrients composition of river and lake sediments was usually stable and special, with lower nitrogen and phosphorus content but higher potassium levels. The sources of heavy metals and persistent organic pollutants in multisource sludge were correlated, generally much higher among municipal sludge than dredged sludge and river and lake sediments, which were the most important limitation for final land utilization. Despite various properties of multisource sludge, the final fate and destination have some overall similarities, which need to be supplemented and improved by standards and laws. The study provided a preliminary analysis of suitable technical routes for municipal sludge, dredged sludge, river and lake sediments based on their different characteristics respectively, which was of great significance for multisource sludge co-treatment and disposal in the future of China.     

Progressively narrow the gap of PM2.5 pollution characteristics at urban and suburban sites in a megacity of Sichuan Basin, China

Nowadays, the fine particle pollution is still severe in some megacities of China, especially in the Sichuan Basin, southwestern China. In order to understand the causes, sources, and impacts of fine particles, we collected PM_2.5 samples and analyzed their chemical composition in typical months from July 2018 to May 2019 at an urban and a suburban (background) site of Chengdu, a megacity in this region. The daily average concentrations of PM_2.5 ranged from 5.6-102.3 µg/m³ and 4.3-110.4 µg/m³ at each site. Secondary inorganics and organic matters were the major components in PM_2.5 at both sites. The proportion of nitrate in PM_2.5 has exceeded sulfate and become the primary inorganic component. SO₂ was easier to transform into sulfate in urban areas because of Mn-catalytic heterogeneous reactions. In contrast, NO₂ was easily converted in suburbs with high aerosol water content. Furthermore, organic carbon in urban was much greater than that in rural, other than elemental carbon. Element Cr and As were the key cancer risk drivers. The main sources of PM_2.5 in urban and suburban areas were all secondary aerosols (42.9%, 32.1%), combustion (16.0%, 25.2%) and vehicle emission (15.2%, 19.2%). From clean period to pollution period, the contributions from combustion and secondary aerosols increased markedly. In addition to tightening vehicle controls, urban areas need to restrict emissions from steel smelters, and suburbs need to minimize coal and biomass combustion in autumn and winter.