固相萃取-高效液相色谱法测定水中丙烯酰胺研究

采用固相萃取-高效液相色谱法对水中的丙烯酰胺定性、定量分析。结果显示:丙烯酰胺含量在20μg/L~400μg/L之间呈良好线性关系,回归方程Y=0.476 8X+0.845 4,相关系数R为0.997 72,检出限0.1μg/L,样品回收率在71.85%~92.28%之间,相对标准偏差为3.4%~10.9%。该方法减少了有机溶剂用量,缩短了有机溶剂暴露时间,降低污染,且能满足地表水环境质量标准(GB 3838-2002)限值要求,是水中丙烯酰胺含量准确稳定的检测方法。用该方法测定了呼和浩特市引黄入呼左岸、右岸、中浅和中深4个断面水样,均未检出丙烯酰胺。     

烟气排放连续监测系统比对监测中存在问题探讨研究

随着工业化、城镇化进程加快和消费结构的持续升级,能源需求刚性增长、国内资源保障能力受限、环境容量受到制约,"十二五"时期的节能减排工作显得尤为紧迫、艰巨和重要。污染源自动监测数据作为节能减排监测体系中计算排污企业主要污染物排放量和确定达标排放的重要依据,是环境保护主管部门进行总量考核、监督执法、排污申报核定等工作的数据基础。用传统的国家标准方法对固定污染源烟气排放连续监测系统进行比对测试时,会受到水分、一氧化碳、硫化氢、监测点位以及分析方法的影响,对比对测试结果会造成一定影响;通过分析比对监测过程中的影响原因,针对相应的影响因素给出了相应的对策措施,提高了自动监测数据的准确性和有效性。     

固定污染源废气监测工况核查重点

在多年废气固定污染源监测工作经验的基础上,对装置和设施的生产运行状态（即工况）影响固定污染源监测结果质量的因素进行了分析和总结,提出了相关的工况核查重点及方法。     

表面活性剂辅助离子液体预处理稻秆的酶解动力学与结构变化分析

以稻秆为原料进行酶解研究,考察了纤维素酶和β-葡萄糖苷酶单独作用及协同作用对稻秆酶解还原糖产量的影响,以确定最佳酶体系,并研究在最佳酶体系中不同种类表面活性剂辅助离子液体对稻秆酶解的影响和动力学特征,最后通过稻秆成分分析、FTIR、XRD、SEM对预处理前后的稻秆结构、结晶性进行了分析比较.结果表明,纤维素酶与β-葡萄糖苷酶具有协同作用,而且在最佳酶体系中,与未处理稻秆及单独离子液体预处理相比,不同种类表面活性剂辅助离子液体预处理的稻秆在酶水解48 h时纤维转化率分别增加40%~85%、10%~31%,并且预处理对反应速率的提高有促进作用.     

固相萃取-超高效液相色谱-串联质谱测定水中痕量苯甲地那铵

苯甲地那铵是一种广泛使用的苦味剂,近年来被发现在欧洲水体中普遍存在。建立灵敏可靠的环境样品前处理分析方法对评价其环境行为具有重要意义。通过优化关键前处理过程参数,建立了水中苯甲地那铵的固相萃取-超高效液相色谱串联质谱分析方法,系统考察了该方法的准确度、精密度、基质效应、检出限以及线性范围。研究表明：当调节水样pH至8以上,采用混合型阳离子交换小柱(200 mg, 3 mL)富集水样,采用含体积分数2%甲酸的甲醇溶液洗脱时,该方法可获得最佳回收率;纯水和环境水样中加标回收率分别为97%～105%和89%～119%,相对标准偏差小于7%;基质效应均在24%以内;方法检出限为0.07 ng/L,线性范围为0.01～50μg/L。该方法可用于环境水体中苯甲地那铵的痕量检测。     

纳米TiO2/CNTs复合材料的制备及其光学性质

TiO2在碳纳米管上的复合材料可以增加材料的光催化性能,已成为新的研究热点.本文采用低温液相法成功地合成了TiO2/CNTs复合材料,并用TEM、XRD和UV-vis对材料进行了表征,结果表明,TiO2很好地分散在CNTs上,具有显著的催化效果,有很好的应用前景.     

New metallothionein assay in Scrobicularia plana: heating effect and correlation with other biomarkers

Metallothionein (MT) and other biomarker levels were measured in Scrobicularia plana clams to assess pollution of the Guadalquivir Estuary possibly affected by metals released from Aznalcóllar pyrite mine in 1998. After optimizing reagent concentrations for monobromobimane derivatization, MT levels were quantified by reversed-phase high-performance liquid chromatography coupled to fluorescence detection (RP-HPLC-FD) in heated or unheated digestive gland extracts and compared to those obtained by differential pulse polarography (DPP). MT content assayed by RP-HPLC-FD in unheated samples was higher than that obtained by DPP and correlated better with metals and anti-oxidant activities. MT assay by RP-HPLC-FD in unheated extracts would be preferable for assessing metal pollution, due to its greater sensitivity and specificity. In addition to MT induction, glyoxalase II inhibition was well correlated with metal contents. Our results suggest that metals at the estuary do not originate from Aznalcóllar spill, but from those carried along by the river and deposited at its concave bank.     

液晶显示器液晶处理与铟回收技术

在实验室条件下,对液晶显示器回收的各个重要环节作了初步的探索,提出了一整套回收工艺.其中包括利用丙酮常温浸取去除偏光片、分离玻璃基板、溶解液晶,还包括利用硫酸溶液和二氧化锰联合浸取玻璃基板,铟的浸取率达89%.得到的铟的酸液经过萃取、置换和电解,可以得到铟的产品,为液晶显示器的资源化和无害化提供实验数据和技术支持.     

Effect of soil moisture dynamics on dense nonaqueous phase liquid (DNAPL) spill zone architecture in heterogeneous porous media

The amount, location, and form of NAPL in contaminated vadose zones are controlled by the spatial distribution of water saturation and soil permeability, the NAPL spill scenario, water infiltration events, and vapor transport. To evaluate the effects of these processes, we used the three-phase flow simulator STOMP, which includes a new permeability-liquid saturation-capillary pressure (k-S-P) constitutive model. This new constitutive model considers three NAPL forms: free, residual, and trapped. A 2-D vertical cross-section with five stratigraphic layers was assumed, and simulations were performed for seven cases. The conceptual model of the soil heterogeneity was based upon the stratigraphy at the Hanford carbon tetrachloride (CT) spill site. Some cases considered co-disposal of NAPL with large volumes of wastewater, as also occurred at the Hanford CT site. In these cases, the form and location of NAPL were most strongly influenced by high water discharge rates and NAPL evaporation to the atmosphere. In order to investigate the impact of heterogeneity, the hydraulic conductivity within the lower permeability layer was modeled as a realization of a random field having three different classes. For six extreme cases of 100 realizations, the CT mass that reached the water table varied by a factor of two, and was primarily controlled by the degree of lateral connectivity of the low conductivity class within the lowest permeability layer. The grid size at the top boundary had a dramatic impact on NAPL diffusive flux just after the spill event when the NAPL was present near the ground surface. NAPL evaporation with a fine grid spacing at the top boundary decreased CT mass that reached the water table by 74%, compared to the case with a coarse grid spacing, while barometric pumping had a marginal effect for the case of a continuous NAPL spill scenario considered in this work. For low water infiltration rate scenarios, the distribution of water content prior to a NAPL spill event decreased CT mass that reached the water table by 98% and had a significant impact on the formation of trapped NAPL. For all cases simulated, use of the new constitutive model that allows the formation of residual NAPL increased the amount of NAPL retained in the vadose zone. Density-driven advective gas flow from the ground surface controlled vapor migration in strongly anisotropic layers, causing NAPL mass flux to the lower layer to be reduced. These simulations indicate that consideration of the formation of residual and trapped NAPLs and dynamic boundary conditions (e.g., areas, rates, and periods of different NAPL and water discharge and fluctuations of atmospheric pressure) in the context of full three-phase flow are needed, especially for NAPL spill events at the ground surface. In addition, NAPL evaporation, density-driven gas advection, and NAPL vertical movement enhanced by water flow must be considered in order to predict NAPL distribution and migration in the vadose zone.     

生物滤池对气相与液相中污染物质的净化

通过实验室研究探讨了生物滤池同时处理废水和废气的可行性。试验结果表明：在２５℃－３７℃条件下,甲苯废气的流量为９０Ｌ／ｈ,甲苯浓度为５００ｍｇ／ｍ＾３;废水的流量为０．４Ｌ／ｈ,ＣＯＤｃｒ浓度为４００－７５０ｍｇ／Ｌ,甲苯与ＣＯＤｃｒ的去除率分别是７０％－７２％和８６％－８９％。