Renewable energy consumption and its environmental impacts: A meta-regression analysis

This study involves a meta-analytical review of several articles, using the closest assumptions for the independent variable (renewable energy consumption), to determine the relationship with its environmental impacts. Furthermore, Sustainable Development Goal (SDG) in 2015 pays attention to related problems in both developing and developed countries. The effects of carbon emissions, natural resources, renewable energy consumption, and non-renewable energy on the environment are also reviewed. Following the separation of studies, the closest assumption was observed for the independent variable (energy source applications) of renewable energy. The meta-analysis was obtained using OpenMEE and JASP, and the results show the observed outcome, which was expressed in percentage. Based on the analysis, the Renewable Energy model has a value of 0.15, with the largest forest plots of 0.73, 0.69, and 0.80, recorded for studies 13, 19, and 23, respectively, while the least forest plots were recorded for studies 6, 11, 12, 15, 20, 22, 24, 25, 26, and 28. Therefore, renewable energy consumption, specifically in the mining industry, has the capacity to influence global warming. The respective industry has a unique influence on the processes that require renewable energy, for instance, the coal mining industry produces a smaller forest plot value, compared to oil and gas, or other mineral industries.     

The value of flexibility in conservation financing

Land‐acquisition strategies employed by conservation organizations vary in their flexibility. Conservation‐planning theory largely fails to reflect this by presenting models that are either extremely inflexible—parcel acquisitions are irreversible and budgets are fixed—or extremely flexible—previously acquired parcels can readily be sold. This latter approach, the selling of protected areas, is infeasible or problematic in many situations. We considered the value to conservation organizations of increasing the flexibility of their land‐acquisition strategies through their approach to financing deals. Specifically, we modeled 2 acquisition‐financing methods commonly used by conservation organizations: borrowing and budget carry‐over. Using simulated data, we compared results from these models with those from an inflexible fixed‐budget model and an extremely flexible selling model in which previous acquisitions could be sold to fund new acquisitions. We then examined 3 case studies of how conservation organizations use borrowing and budget carry‐over in practice. Model comparisons showed that borrowing and budget carry‐over always returned considerably higher rewards than the fixed‐budget model. How they performed relative to the selling model depended on the relative conservation value of past acquisitions. Both the models and case studies showed that incorporating flexibility through borrowing or budget carry‐over gives conservation organizations the ability to purchase parcels of higher conservation value than when budgets are fixed without the problems associated with the selling of protected areas.     

The social side of spatial decision support systems: Investigating knowledge integration and learning

Spatial decision support systems (SDSS) represent a step forward in efforts to account for the spatial dimension in environmental decision-making. The aim of SDSS is to help policymakers and practitioners access, interpret and understand information from data, analyses and models, and guide them in identifying possible actions during a decision-making process. Researchers, however, report difficulties in up-take of SDSS by the intended users. Some suggest that this field would benefit from investigation of the social aspects involved in SDSS design, development, testing and use. Borrowing insights from the literature on science-policy interactions, we explore two key social processes: knowledge integration and learning. Using a sample of 36 scientific papers concerning SDSS in relation to environmental issues, we surveyed whether and how the selected papers reported on knowledge integration and learning. We found that while many of the papers mentioned communication and collaboration with prospective user groups or stakeholders, this was seldom underpinned by a coherent methodology for enabling knowledge integration and learning to surface. This appears to have hindered SDSS development and later adoption by intended users.     

随机地震激励下相邻隔震结构被动控制研究

利用隔震结构和非隔震结构间的相互作用来减小地震作用下的结构响应,考虑地震激励的随机性,基于Clough-Penzien谱模型,推导了相邻结构随机响应的拓展状态方程,采用两种优化控制目标,分析得到了相邻隔震结构体系间连接控制装置的控制参数与结构随机响应的关系及其对控制效果的影响,并分别从地震响应时程和振动累计能量时程角度研究了相应地多自由度相邻隔震结构复合被动控制体系,在不同优化准则及不同控制方案下,结构体系的减震控制效果。研究结果表明,相邻隔震结构复合被动控制体系,可以获得较好的减震控制效果,阻尼系数在减震控制中起主要作用,但存在最优取值,并不是越大越好;采用以左、右子结构振动总能量最小为优化准则,在顶层+中间层安装控制装置的控制方案,可以有效地减小相邻结构的地震响应,得到的控制效果较好。     

Geomorphic and Ecological Consequences of Riprap Placement in River Systems

Riprap, consisting of large boulders or concrete blocks, is extensively used to stabilize streambanks and to inhibit lateral erosion of rivers, yet its effect on river morphology and its ecological consequences have been relatively little studied. In this paper, we review the available information, most of it culled from the “grey” literature. We use a simple one‐dimensional morphodynamic model as a conceptual tool to illustrate potential morphological effects of riprap placement in a gravel‐bed river, which include inhibition of local sediment supply to the channel and consequent channel bed scour and substrate coarsening, and downstream erosion. Riprap placement also tends to sever organic material input from the riparian zone, with loss of shade, wood input, and input of finer organic material. Available information on the consequences for the aquatic ecosystem mainly concerns effects on commercially and recreationally important fishes. The preponderance of studies report unfavorable effects on local numbers, but habitat niches created by openings in riprap can favorably affect invertebrates and some small fishes. There is a need for much more research on both morphological and ecosystem effects of riprap placement.     

Emissions of fluorides from welding processes

The levels of fluoride airborne particulates emitted from welding processes were investigated. They were sampled with the patented IOM Sampler, developed by J. H Vincent and D. Mark at the Institute of Occupational Medicine(IOM), personal inhalable sampler for simultaneous collection of the inhalable and respirable size fractions. Ion chromatography with conductometric detection was used for quantitative analysis. The efficiency of fluoride extraction from the cellulose filter of the IOM sampler was examined using the standard sample of urban air particle matter SRM-1648 a. The best results for extraction were obtained when water and the anionic surfactant N-Cetyl-N-N-Ntrimethylammonium bromide(CTAB) were used in an ultrasonic bath. The limits of detection and quantification for the whole procedure were 8 μg/L and 24 μg/L, respectively The linear range of calibration was 0.01–10 mg/L, which corresponds to 0.0001–0.1 mg of fluorides per m3 in collection of a 20 L air sample. The concentration of fluorides in the respirable fraction of collected air samples was in the range of 0.20–1.82 mg/m3, while the inhalable fraction contained 0.23–1.96 mg/m3 of fluorides during an eight-hour working day in the welding room.     

汾河源区不同景观带水文过程研究

目前水源区景观带尺度水文过程机制研究还非常薄弱.针对山西汾河流域水环境恶化,迫切需要解决的水问题.应用同位素示踪、水文地质勘察、水化学信号等研究方法,揭示汾河源区景观带尺度水文过程机制.结果表明,汾河水源区亚高山草甸带与中高山森林带是汾河源区主要径流形成区,而疏林灌丛带与山地草原带在时间上滞后了雨季降水的汇集.源区径流主要由降雨、地下水、积雪和冻土融水混合补给.流域内降水很少直接产生地表径流补给河流,而是经过各景观带下渗,转换成壤中流、孔/裂隙水或地下径流,最终汇入河道,完成"补径排"水文过程.这一研究可为汾河流域水环境恶化的遏制提供科学依据与参考,以期实现山西清水复流和生态环境的全面修复.     

Measuring site-level success in brownfield redevelopments: a focus on sustainability and green building

This research has met the following four objectives within the broader research topic of characterizing and quantifying success in brownfield revitalization: (1) to define 40 total indicators that define and determine the success of brownfield redevelopments in four categories: environment-health, finance, livability, and social-economic; (2) to use these indicators to develop a partially automated tool that stakeholders in brownfield redevelopment may use to more easily assess and communicate success (or failures) in these projects; (3) to integrate "green" building as an important aspect of successful brownfield redevelopments; and (4) to develop this tool within the framework of a specific multi-attribute decision method (MADM), the analytical hierarchical process (AHP). Future research should include the operationalization and application of this tool to specific sites. Currently, no such indicator framework or automated tool is known to exist or be in use. Indicators were chosen because of their ability to reduce data into comprehensible measurements and to systematically measure success in a standardized fashion. Appropriate indicators were selected based on (1) interviews with prominent private developers and national leaders in brownfield redevelopment, (2) a review of the relevant literature, (3) objective hierarchies created in this project, and (4) the ability for each indicator to serve goals in more than one of the four categories described above. These were combined to form the Sustainable Brownfields Redevelopment (SBR) Tool. A survey was conducted to serve as a preliminary assessment and proposed methodology for judging the validity of the SBR Tool. Professionals in the academic, private, and public sector were asked to provide an evaluation of the management tool and a weighting of the relative importance of each indicator and each of the four categories listed previously. Experts rated the tool at 7.68 out of 10 suggesting that this framework will be useful in evaluating these redevelopments upon completion and in formulating initial site plans and building design.     

Toward quantifying the effectiveness of water trading under uncertainty

This paper presents a methodology for quantifying the effectiveness of water-trading under uncertainty, by developing an optimization model based on the interval-parameter two-stage stochastic program (TSP) technique. In the study, the effectiveness of a water-trading program is measured by the water volume that can be released through trading from a statistical point of view. The methodology can also deal with recourse water allocation problems generated by randomness in water availability and, at the same time, tackle uncertainties expressed as intervals in the trading system. The developed methodology was tested with a hypothetical water-trading program in an agricultural system in the Swift Current Creek watershed, Canada. Study results indicate that the methodology can effectively measure the effectiveness of a trading program through estimating the water volume being released through trading in a long-term view. A sensitivity analysis was also conducted to analyze the effects of different trading costs on the trading program. It shows that the trading efforts would become ineffective when the trading costs are too high. The case study also demonstrates that the trading program is more effective in a dry season when total water availability is in shortage.     

COST ANALYSIS OF WATER AND WASTE WATER TREATMENT PROCESSES IN DEVELOPING COUNTRIES1

ABSTRACT: Mathematical modeling techniques are used to develop predictive equations for cost of water and waste water treatment processes in developing countries utilizing socioeconomic, environmental, and technological indicators. Predictive equations are developed for each of the three regions (Africa, Asia, and Latin America) for construction, operation, and maintenance costs of slow sand filter, rapid sand filter, stabilization lagoon, aerated lagoon, activated sludge, and trickling filter. Data analysis indicated that cost of water treatment processes is a function of technological indicator (percentage of imported materials), population, and the design capacity. The variables which gave the best correlation for waste water treatment cost were population, design flow, and the percentage of imported waste water disposal materials.