POTENTIAL FOR AUGMENTING WATER YIELD THROUGH FOREST PRACTICES IN WESTERN WASHINGTON AND WESTERN OREGON1

Western Washington and western Oregon comprise a water-rich region that has a very uneven annual distribution of both precipitation and streamflow. Highest demand for water coincides with lowest streamflow levels between July 1 and September 30 when less than 5 percent of annual water yield occurs. Increases in annual water yield in small, experimental watersheds in the region have ranged up to 600 mm after entire watersheds were logged and up to 300 mm in watersheds that were 25 to 30 percent logged. Most of the increase has occurred during the fall-winter rainy season, and yield increases have been largest during the wettest years. Estimated sustained increases in water yield from most large watersheds subject to sustained yield forest management are at best only 3-6 percent of unaugmented flows. Realistically, watersheds in this region will not be managed to produce more water. Water yield augmentation will continue to be only a small and variable by-product of logging. The utility of water yield augmentation is limited by its size and by its occurrence relative to the time of water demand. In some local areas, reduction of fog interception and drip or establishment of riparian phreatophytic hardwoods may reduce summer flows.     

FLUVIAL SEDIMENT STORAGE IN WETLANDS1

ABSTRACT: The important ecological and hydrological roles of wetlands are widely recognized, but the geomorphic functions of wetlands are also critical. Wetlands can be defined in geomorphic, as well as in hydrological or biological terms, and a geomorphic definition of wetlands is proposed. An analysis of fluvial sediment budget studies shows that wetlands typically serve as short-term sediment sinks or longer-term sediment storage sites. In ten study basins of various sizes, an estimated 14 to 58 percent of the total upland sediment production is stored in alluvial wetland or other aquatic environments. Of the sediment reaching streams, 29 to 93 percent is stored in alluvial wetland or channel environments. For basins of more than 100 km², more than 15 percent of total upland sediment production and more than 50 percent of sediment reaching streams is deposited in wetlands. The data underestimates the magnitude of wetland sediment storage due to the lack of data from large river systems. A theoretical analysis of river channel sediment delivery shows that wetland and aquatic sediment storage is inevitable in fluvial systems and systematically related to basin size. Results suggest that wetlands should be managed in the context of drainage basins, rather than as discrete, independent units.     

Experimental determination of dust cloud combustion parameters of α-AlH3 powder in its charged and fully discharged states for H2 storage applications

This study discusses results of an experimental program for determination of dust cloud combustion parameters of charged and fully discharged states of metastable alane (aluminum hydride, α-AlH₃ polymorph) powder in air. The measured characterization parameters include: maximum deflagration pressure rise (ΔP_MAX), maximum rate of pressure rise (dP/dt)_MAX, minimum ignition temperature (T_C), minimum explosible concentration (MEC), and minimum ignition energy (MIE). These measured values are used for calculating the associated explosion severity (ES) index, and volume-normalized maximum rate of pressure rise (K_St). The experimental results show values of MEC and T_C of fully discharged alane to be greater than those of the charged alane but measured MIE values are about the same. Moreover, the results show higher reactivity of fully discharged alane dust cloud in air compared to its charged state. For example, ES and K_St of discharged alane dust cloud in air are about 300% and 35% greater, respectively, than ES and K_St of charged alane dust. The higher air reactivity of fully-discharged (primarily Al powder) dust cloud compared to its charged state can be attributed to the higher surface energy (J/m²) of Al compared to that of α-AlH₃. These experimental insights have safety implications in postulated risk scenarios involving light-duty vehicles powered by PEM fuel cells. The core insights and critical data provided by this contribution are useful for supporting development and promulgation of hydrogen safety standards and augmenting property databases of hydrogen storage materials.     

某型末制导炮弹控制舱贮存加速寿命试验应力研究

目的研究某型末制导炮弹控制舱贮存加速寿命试验应力类型。方法在明确某型末制导炮弹控制舱结构特征的基础上,逐一对各部组件进行失效模式及失效机理分析,归纳出影响控制舱失效的主要应力类型。结果影响末制导炮弹控制舱贮存可靠度的主要环境应力是温度和湿度。结论选取温度做单应力加速寿命试验。     

Thermal energy storage and thermodynamic properties of (E)-3-m-tolylbut-2-enoic acid as a medium temperature phase change material

Phase change materials (PCMs) that can store and release heat energy over the temperature range from 363 to 393 K are crucial for solar absorption cooling, and it is worthy to seek new solid-liquid PCMs candidates that melt and crystallize in this temperature range. In this paper, (E)-3-m-tolylbut-2-enoic acid (mTBEA) was applied as a PCM candidate. Its thermal energy storage properties and thermal stability were systematically investigated. The results showed that mTBEA melted at 382.9 ± 0.5 K and crystallized at about 364 K, with a melting enthalpy (Δ_fusH) of 138.4 ± 6.9 J g^?1 and showed good long-term cyclic stability and thermal stability. The supercooling of mTBEA was stabilized at about 20 K, indicating that the conservation condition of melted mTBEA could be simple. In addition, the melted mTBEA could release all the absorbed thermal energy upon crystallizing. Besides, mTBEA exhibited good thermal stability for it to be applied as PCM. Hence, mTBEA is a promising PCM candidate for solar absorption cooling. Furthermore, the heat capacity of mTBEA was measured by modulated temperature differential scanning calorimetry (MTDSC) over the temperature range from 198.15 to 431.15 K, and the molar thermodynamic functions, [H_T-H_298.15]_m and [S_T-S_298.15]_m, were calculated based on the fitted molar heat capacity data.     

Political commitment to CO<Subscript>2</Subscript> capture and storage: evidence from government RD&;D budgets

For CO₂ capture and storage (CCS) to succeed as a mitigation strategy, political commitment is one of several prerequisites. This article offers an appraisal of political commitment to a CCS strategy among high-income countries in Europe and North America: Which governments are committed, and what particular interests and concerns do they seek to accommodate by supporting CCS? In order to answer these questions, new data are reported on government CCS research, development and demonstration (RD&;D) budgets. RD&;D budgets divided by GDP is used as an indicator of political commitment, and explanations are sought for cross-national differences. The analysis shows that fossil fuels reserves and extraction within a country has a very strong bearing on funding levels. Likely explanations include the potential for combining CCS with enhanced resource recovery. All large economies (population >50 million) have a funding program. The smaller states that provide funding (Norway, Canada, the Netherlands) have the highest funding levels relative to GDP. These findings suggest that high-income petroleum producing countries are likely to be leaders in promoting CCS and a favorable regulatory environment. The fact that all large, high-income countries in the two regions now display some interest in CCS further improves its political outlook.     

The effects of colony-level selection on the social organization of honey bee (Apis mellifera L.) colonies: colony-level components of pollen hoarding

Two-way selection for quantities of stored pollen resulted in the production of high and low pollen hoarding strains of honey bees (Apis mellifera L.). Strains differed in areas of stored pollen after a single generation of selection and, by the third generation, the high strain colonies stored an average 6 times more pollen than low strain colonies. Colony-level organizational components that potentially affect pollen stores were identified that varied genetically within and between these strains. Changes occurred in several of these components, in addition to changes in the selected trait. High strain colonies had a significantly higher proportion of foragers returning with loads of pollen, however, high and low strain colonies had equal total numbers of foragers Colony rates of intake of pollen and nectar were not independent. Selection resulted in an increase in the number of pollen collectors and a decrease in the number of nectar collectors in high strain colonies, while the reciprocal relationship occurred in the low strain. High and low strain colonies also demonstrated different diurnal foraging patterns as measured by the changing proportions of returning pollen foragers. High strain colonies of generation 3 contained significantly less brood than did low strain colonies, a consequence of a constraint on colony growth resulting from a fixed nest volume and large quantities of stored pollen. These components represent selectable colony-level traits on which natural selection can act and shape the social organization of honey bee coloniesCommunicated by R.F.A. Moritz     

食物和繁殖对蓝尾石龙子储能的影响

在实验室常温条件下 ,测定了蓝尾石龙子禁食雄体、喂食雄体、繁殖雌体及非繁殖雌体去尾躯干、尾、肝脏和腹脂肪体内的脂肪储存量 .结果是 :喂食雄体各储能部位脂肪能量显著高于禁食雄体 ,其中 ,腹脂肪体和尾脂肪能量差异尤为显著 ,喂食雄体腹脂肪体和尾脂肪储存量分别为禁食雄体的 11.4倍和 6 .4倍 ;非繁殖雌体各储能部位能量显著高于繁殖雌体 ,差异最大的部位是腹脂肪体和尾 ,非繁殖雌体腹脂肪体和尾贮存脂肪分别为繁殖雌体的 5 .5倍和3.3倍 .这些结果表明 :尾和腹脂肪体是蓝尾石龙子的主要储能部位 ;食物条件能显著影响体内能量储存量 ;尾和腹脂肪体内储存能量对雌体繁殖具有重要作用 .图 2表 2参 2 0     

雷州半岛桉树人工林地的生物改良研究

研究雷州半岛桉树人工林地的生物改良途径。结果表明；桉树林下间种绿肥、牧草或菠萝，可以提高林地覆盖度，增加林地枯落物，提高土壤肥力，促进桉树的生长。筛选出比较适宜于桉树人工林下间种的植物品种，并对间种的经济效益作了初步分析。     

桉树人工林生态系统养分循环与平衡研究Ⅰ. 桉树人工林生态系统的养分贮存

采用田间试验和定位方法，在标准样地中研究养分的输入、输出和贮存。桉树人工林生态系统的养分贮存，包括土壤、桉树林分和凋落物三者贮存的养分。在田间试验的基础上，获得了大量的分析数据。论述了刚果W5桉树人工林生态系统土壤养分的贮存量、林分的养分贮存量和凋落物层的养分贮存量以及上述分系统内大、中量元素的含量比例。土壤养分的贮存量，全量养分以K最多，其次为N、P；有效养分贮存量大小的顺序为N，K，Ca，P，Mg，Mn，Zn，Cu，B。桉树林分的总养分贮存量，是逐年增加的，但以第2年的增量最大；各元素贮量大小，则每年不同。凋落物层的养分贮存量，总体上逐年增长，但以第4年最多；各元素贮存量大小的顺序为N，Ca，Mg，K，P。这些结果，对于指导桉树施肥，有重要的参考价值。