氨法脱硫生产氨肥的清洁生产研究

我国因燃煤导致的SO2污染危害十分严重。从清洁生产角度出发,通过比较锅炉烟气脱硫各种方法的优缺点,确定氨法脱硫作为化工企业处理锅炉烟气的工艺。介绍了氨法脱硫机理,工艺各系统结构组成,进行了经济及社会效益分析。氨法脱硫工艺可以去除93％的SO2,处理后的烟气达到了国家排放标准,脱硫副产品硫酸铵可以转交给同区域的企业,深加工为优质化肥。说明发展清洁生产和循环经济是企业预防和控制污染的有效途径,是实现可持续发展战略的必然选择,有利于企业技术进步,提高管理水平,增强综合竞争能力。     

从经济学角度对比中国与美国的能源消费

分析了中关两国能源消费总量和能源结构的差异,探讨了中关两国能源消费差异的经济学内涵,认为经济指标GDP并不能完全反映人们生活水平的提高,而其带来的环境问题却很可能影响后续的经济发展。因此,在发展经济的同时,应该充分考虑能源需求给环境带来的压力。适当调整能源结构、提高能源效率和发展替代能源是未来能源消费战略的重中之重,也是经济、环境和社会协调发展的重要保障。     

中水回用与效益分析

当前我国水资源供需矛盾日益加剧,实现中水利用是节约水资源的一条有效途径.通过分析中水水源、MBR处理技术及中水用途,结合一个高校实例,进行经济效益分析,并对建设中水回用系统的可行性进行论证.经计算可得效益费用比达到2.38,经济效益是非常明显的,具有实际的参考价值.中水回用不仅节约了水资源而且也产生了明显的经济效益,是城市发展的趋势.     

Application of CGP-cross route process for microstructure refinement and mechanical properties improvement in steel sheets

A modified method of severe plastic deformation (SPD) entitled constrained groove pressing-cross route (CGP-CR) was introduced for imposing a high magnitude of equivalent strain of about 2.32 per pass on the sheet form samples. The major benefit of this improved route compared to previous common route was the more homogeneity of strain in the rolling (RD) and transverse (TD) directions of sheets. In this study, low carbon steel samples were used for examination of evolutions in microstructure and mechanical properties during SPD via CGP-CR process. Mechanical properties improvement were measured by tensile and macro hardness tests. The results indicate that CGP-CR process can effectively improve tensile strength; and also, yield stress and hardness of as-received low carbon steel samples were improved up to about 100% after two deformation passes. Also, high magnitude of inhomogeneity can be observed in hardness distribution through first pass of the process which diminishes in the subsequent passes. Microstructural evolutions during process were monitored by optical microscopy observations and X-ray diffraction analysis. The results demonstrate that initial ferritic microstructure with grain size of about 30 μm was refined to a 225 nm cell structure after two passes of CGP-CR process.     

Modulation-assisted high speed machining of compacted graphite iron (CGI)

The application of controlled, low-frequency modulation (～100 Hz) superimposed onto the cutting process in the feed-direction – modulation-assisted machining (MAM) – is shown to be quite effective in reducing the wear of cubic boron nitride (CBN) tools when machining compacted graphite iron (CGI) at high machining speeds (>500 m/min). The tool life is at least 20 times greater than in conventional machining. This significant reduction in wear is a consequence of the multiple effects realized by MAM, including periodic disruption of the tool–workpiece contact, formation of discrete chips, enhanced fluid action and lower cutting temperatures. The propensity for thermochemical wear of CBN, the principal wear mode at high speeds in CGI machining, is thus reduced. The tool wear in MAM is also found to be smaller at the higher cutting speeds (730 m/min) tested. The feed-direction MAM appears feasible for implementation in industrial machining applications involving high speeds.     

基于情景分析的城市餐厨垃圾处理方案研究

城市生态环境保护是生态文明建设的重要组成部分之一,而餐厨垃圾是影响城市生态环境的一种主要污染源,因此,有效处理餐厨垃圾也是当前城市生态环境保护的重要内容。本文以重庆市为例,针对其特殊的餐厨垃圾组成成分,调查分析了其主城区餐厨垃圾污染状况及处理难点,提出了3种主要处理方案情景并进行综合效益评价。结果表明建立餐厨垃圾小型处理站是最优方案,其成本效益核算结果说明当政府基金和垃圾产量有限时,也可采用缩小处理站规模以达到最高的组合效益。     

浅析化工园区大气特征因子自动监测综合分析

从总体状况评价、浓度变化特征、疑似源探寻等角度初步分析了某化工园区大气特征因子自动监测数据。分析表明,合理选用不同水平的数据集可以突出大气特征因子的规律性,尤其是疑似源探寻;采用现场检查等手段与自动监测的相互校核十分必要,特别是便携式气相色谱质谱仪对特征因子自动监测系统“假阳性”识别。     

基于DEA的上海市非中心城区工业生态效率研究

运用数据包络分析（DataEnvelopmentanalysis,DEA）的方法,从环境污染和资源消耗两个方面,建立了工业生态效率评价的指标体系,评价了2008年上海市非中心城区各区县的工业生态效率。结果表明,松江区处于上海市工业生态效率的前沿面,9个区县中有2／3区县的工业生态效率优于上海市平均水平。其中,崇明、嘉定和青浦处于规模报酬递增阶段,奉贤、闵行、浦东、金山、宝山则处于规模报酬递减阶段。最后,基于C2R模型对各区县的投入产出情况进行了优化调整,认为削减SO2的排放量和减少能源的消耗应是各区县提高工业生态效率的关键。     

蜂窝流道热沉强化传热数值模拟

热沉是模拟太空深冷环境的核心部件。为提高空间深冷环境的模拟效果,更好地满足型号试验需求,设计了一种蜂窝流道热沉。利用流体力学理论和有限元方法对蜂窝热沉内部流体的流动和强化传热进行数值模拟,分析流道结构参数对流体流动和换热的影响,确定最优的流道结构参数。结果表明,同等条件下蜂窝热沉表面温度低于管板式热沉5 K左右,温度均匀性可达到±2 K;流道深度和间距是影响流体在热沉中流动与传热的重要因素,合理选择流道结构参数可以提高热沉的换热性能;需要综合考虑传热和阻力问题来确定最优的流道结构参数,最优的蜂窝热沉流道间距为75 mm,深度为10 mm。     

军用物资集装箱内部低温环境条件研究

以天津和齐齐哈尔两个低温地区军用物资集装箱运输为背景,分别对两个地区的集装箱内部温度变化及大气温度等数据进行测试并对比分析。对齐齐哈尔地区的数据进行回归分析,建立了集装箱内部温度模型,预测出集装箱内部最恶劣的低温极值范围,为危险军用物资集装箱安全储运提供理论依据,并提出了相应的对策及建议。