不同诱导条件对结晶产物形貌特征的影响

在流化床反应器中,以含铜废水为处理对象,重点考察了诱导条件改变对结晶系统运行效率及结晶产物形貌特征的影响。结果表明,进水200 mg/L,进药比([Cu2+]/[CO2-3])1∶1.2,p H为10.2的条件下,铜离子去除率可接近100%,诱导晶种表面平滑,诱导颗粒生长成致密杆状晶体结构,以碳酸盐为沉淀剂的诱导结晶系统依赖于体系的p H,高p H体系下发生的共结晶现象是影响系统运行的主要原因;随着进药摩尔比的增加,结晶产物由短杆状向球状转化,晶体机械强度显著降低大量破碎,影响出水水质;进药比1∶1.2,p H为11的条件下,含铜废水浓度为500 mg/L时,系统去除率可达95%以上,微晶产率低于5%。     

磷酸铵镁碱促(Mg(OH)_2)热解产物氨氮去除性能

磷酸铵镁热解循环技术可以有效降低磷酸铵镁结晶技术的药剂费用。同时,在磷酸铵镁热解过程中添加Mg(OH)2碱促媒介,能阻止磷酸氢镁向焦磷酸镁的转化,并降低热解产物氨氮去除过程中上清液磷酸盐的残留。在Mg(OH)2∶NH+4摩尔比为1∶1,热解温度为110℃条件下,热解产物沉氨效率接近84%,上清液磷酸盐残留量为0.02 mg/L。     

Crystallization behavior of predominantly syndiotactic poly(β-hydroxybutyrate)

Predominantly syndiotactic poly(-hydroxybutyrate), syn-PHB, of variable syndioregularity (syndyad fractions 0.59, 0.62, 0.64, and 0.71) and molecular weight was prepared by the dibutyltin dimethoxide catalyzed ring opening of racemic-butyrolactone (BL). The crystallization behavior of the syn-PHB polymers was investigated by DSC and X-ray diffraction analyses. DSC of films after melting and annealing showed at least one, and often two distinct melting transitions occuring over a broad (often 40°C) temperature range. These results indicate that syn-PHB chain segments of variable syndioregularity form crystalline regions with very different thermodynamic stabilities. Maximum degrees of crystallinity for melt annealed 0.64- and 0.71-syn-PHB was observed at an annealing temperature (T _c ) of 30°C. AtT _c values at 45°C and higher, crystallization of relatively lower syndioregular chain segments was apparently excluded to variable degrees dependent onT _c and sample syndiotactic dyad content. After crystallization of syn-PHB samples at elevated temperatures, ambient temperature annealing resulted in an observed lower temperature melting transition at 50°C. This result showed little to no dependence on syn-PHB syndio-regularity andT _c . Both solution precipitated 0.62-syn-PHB and 0.71-syn-PHB have WAXS patterns with poorly resolved crystalline reflections superimposed on amorphous haloes indicating low levels of crystallinity (17% and 25%, respectively) and poorly formed crystals. Isothermal crystallization monitored by DSC showed that the syn- and natural origin PHB showed fastest crystallization rates at temperatures between 50°C and 70°C and 60°C and 90°C, respectively. From the dependence of the higher melting transition onT _c it was determined that the equilibrium melting temperatures for 0.62-syn-PHB (M _n =83,700 g/mol) and a 0.64-syn-PHB (M _n =11,900 g/mol) were 157 and 154°C, respectively. An Avrami analysis of syn-PHB yielded results similar to that found for natural origin PHB indicating that crystal growth occurs by a two-dimensional mechanism.Guest Editor: Dr. Graham Swift, Rohm & Haas.     

含铬污泥球团在钢铁工业中的应用前景

含铬污泥是一种来源广泛、潜在危害大、难于处理的危险废物,常规的处理与资源化技术如固化/稳定化、造砖、制水泥、提取有价金属、制备铬系产品等,往往存在铬泥消纳量小、利用工艺复杂、成品纯度低、操作过程中存在污染转移等限制性因素。将含铬污泥经造球、高温还原、杂质去除、有用金属回收等工序处理后,返回高炉再利用,不仅可节省钢铁企业高昂的委托处理费用,利用其中的有价资源,还可有效避免污染的二次转移,实现危险废物的闭路循环利用。     

硫酸酸洗废水处理与回用工艺设计

通过对吉林某汽车标准配件厂的废水进行处理及回用研究,设计了该厂酸洗废水处理及回用工艺,工程建设投资86.0万元,运行费用331 400元/a,挽回资金流失1 463 550元/a,当年即可回收投资并创造可观的经济效益.通过加酸冷冻结晶法实现了酸洗废水中废酸回用的目的,并且有效地回收了FeSO4·7H2O,以进一步用于聚合铁等其他产品的生产,达到废物利用、生产用水零排放的目的.     

晶化条件对SAPO分子筛合成及性能的影响

用水热晶化法合成SAPO分子筛 ,通过XRD分析表明 ,在原料及合成物料配比不变的条件下 ,采用不同的晶化时间和晶化温度可以合成出纯的SAPO 5分子筛、纯的SAPO 34分子筛以及SAPO 5和SAPO 34的混合物。以不同的SAPO分子筛为载体的催化剂在NO选择性还原为N2 反应中的催化性能也不同 ,并且耐湿热稳定性也不同。     

磷酸铵镁结晶法去除和回收养猪废水中营养元素的实验研究

以模拟养猪废水为处理对象,进行了磷酸铵镁结晶小试实验,考察了pH值、NH4 、Mg2 、Ca2 和CO23-浓度对磷酸铵镁结晶反应的影响;利用扫描电镜-能谱分析仪(SEM-EDX)和X射线衍射仪(XRD)对结晶产物进行了表征.结果表明,磷酸铵镁结晶反应的最佳pH值范围为9.5～10.5;随着NH4 与磷摩尔比的增加,磷的去除率增大;最佳的镁与磷的摩尔比为1.4:1,过高的镁盐投加量对提高反应效率作用不明显;Ca2 的存在对磷酸铵镁结晶产物的晶形、纯度均产生干扰,当Ca2 增至一定浓度时,反应将生成无定形的磷酸钙沉淀;CO2-3的存在会降低磷的去除率,但不影响磷酸铵镁的晶形与纯度.     

Nitrogen and phosphorus removal for swine wastewater by ammonium crystallization and intermittent aeration process

Abstract

A process on crystallized precipitation of ammonium by adding magnesium salt and phosphate was carried out to improve C/N ratio in swine wastewater. After completion of crystallized precipitation of ammonium, an intermittent aeration process with aeration and non‐aeration periods alternated at interval of 1:1 hr day^‐1 is used for the improved swine wastewater (T‐N/BOD=0.14: BOD=8200 mg/liter and T‐N=1166 mg/liter). The results obtained from the experiment show that the removal ratios of T‐N and NH₄‐N are 91% and 99%, respectively. T‐P is not removed, while the removal ratio of PO₄‐P is 60% as 3% of CaCl₂ liquid is added. The results also indicate that dilution with water is effective to improve the removal of phosphorus even if raw swine wastewater contains high concentrations of T‐N, T‐P, BOD, and TOC.     

NaOH碱促热解磷酸铵镁产物沉氨性能研究

药剂费用过高是阻碍磷酸铵镁结晶技术应用的难题之一,通过磷酸铵镁热解产物循环沉氨可降低药剂费用.但湿法热解会生成热稳定性更好的NH4MgPO4·H2O,从而增加了磷酸铵镁热解的能耗.采用干法热解时,由于不引入额外的水分子,可以降低磷酸铵镁的热解温度.同时,在磷酸铰镁热解过程中加入NaOH碱促试剂,可有效促进磷酸铵镁释放NH4+,提高热解产物的沉氨效率,但同时上清液磷酸盐残留量也随NaOH添加量和热解温度提高而增加.热解温度为110℃时,直接热解产物沉氨效率为84％,而NaOH碱促热解产物沉氨率达到87％(NaOH与NH4+物质的量比为1:1),但此时上清液磷酸盐残留质量浓度达到2.3 mg/L,略高于GB 8978-1996《国家污水综合排放标准》的1.0 mg/L,方便废水的后续处理.     

Ca2+与CO32-协同作用对MAP结晶法去除污泥厌氧消化液中磷的影响

以模拟厌氧消化液为处理对象,进行了磷酸铵镁(MAP)结晶实验,考察了p H值、CO2-3、Ca2+以及CO2-3和Ca2+共存对磷酸铵镁结晶反应的影响;利用扫描电子显微镜(SEM-EDX)、X射线衍射(XRD)和傅里叶变换红外光谱(FTIR)对产物进行了表征.结果表明,随着p H值升高,磷的去除率显著提高,并在p H值为9.5时得到具有良好沉降性能的针状MAP晶体;CO2-3的存在会使磷去除率降低,在实验设定CO2-3浓度最大的条件下,磷去除率降低约17%,同时CO2-3会削弱Ca2+对MAP结晶反应的贡献,但并不改变MAP晶体形态和纯度;Ca2+存在则可以提高P去除率,但对MAP结晶反应抑制作用显著,当体系中n(Ca)/n(Mg)0.65,产物主要以无定形磷酸钙盐为主;在Ca2+与CO2-3共存的体系中,Ca2+可有效地消除CO2-3对除磷效果的影响,随着两者浓度的增加,产物Ca CO3含量增多,磷酸盐则主要以MAP形式沉淀.