污水处理一体化装置的研究现状与展望

污水处理一体化装置具有投资省、占地少、能耗低、处理效果好及管理简便等优点,是现代污水处理的新方向,有着广阔的应用前景。本文结合几种典型的污水处理工艺对污水处理一体化装置进行了概括性的介绍与展望。     

磷钨酸光催化降解甲基橙溶液的研究

以磷钨酸为光催化刺，在紫外灯照射下。对模拟染料废水甲基橙溶液进行光催化降解，并研究了催化剂加入量、pH值、甲基橙初始浓度和外加氧化剂H2O2对光催化降解效果的影响。结果表明，磷钨酸光催化剂加入量为300mg／100mL，pH=2．5时，甲基橙溶液的降解率明显高于其他pH值的降解率；在较低浓度下，甲基橙溶液的光催化降解反应符合一级动力学方程；外加氧化剂H2O2可提高光催化反应速率。     

载体内微孔孔径对生物膜特性及废水处理效果的影响

为解决载体內部微孔孔径在废水生物膜法中缺乏选型依据的问题,采用5种孔径(0.6~4 mm)聚氨酯海绵生物载体构建了SBBR,考察了载体内微孔孔径对生物膜特性(MLSS、EPS、DHA)及废水处理效果的影响,分析了载体内部微孔孔径与生物膜特性的相关性。结果表明：载体内微孔孔径与MLVSS、MLSS呈显著负相关,而与PN、PS、EPS和f呈显著正相关;高生物量使小孔径载体(0.6 mm,1 mm)在反应器运行前中期拥有最佳的废水处理效果,同时过多的生物膜在微孔环境中会堵塞内部的通道和空穴,进而抑制传质,使生物膜活性(DHA、f )降低;而大孔径载体(4 mm)内部传质快、水力剪切作用强,加速生物膜解吸脱落速率,促进了生物膜活性的提高与EPS(主要是TB-EPS)的释放,但同样限制了生物膜量的增长。相较而言,中等孔径载体(2 mm,3 mm)适宜的微孔不仅能维持适量的微生物量,还能保持良好的生物膜结构和活性,为生物膜反应器提供良好的长期运行条件和处理效果。     

Biodegradation of paclobutrazol by a microbial consortium isolated from industrially contaminated sediment

Biodegradability of the plant growth retardant paclobutrazol by a microbial consortium in which Pseudomonas was the predominant strain was investigated in batch culture. The consortium which had been isolated from an industrially contaminated sediment was proven to be useful for the treatment of effluents containing paclobutrazol. Paclobutrazol was degraded by the pure isolated strain of Pseudomonas sp. as well as the microbial consortium. Paclobutrazol was utilized as the sole source of carbon and energy. Sixty percent of the paclobutrazol was degraded by the microbial consortium from an initial concentration of 54 mg L^?1 within 48 h and more than 98% of an initial concentration of 3.4 mg L^?1 was degraded within 36 h. The optimum temperature and pH were determined to be 30°C and 7.0, respectively. A pure strain of a bacterium, isolated from the enrichment culture was identified as Pseudomonas sp. The microbial consortium was tolerant of high pH and could degrade paclobutrazol faster than the pure strain. The degradation rate of this plant growth regulator in an aerobic environment was greater than that under anaerobic conditions.     

Application of Zr(IV) tungstate for removal of metal ions from aqueous solutions

A heteropolyacid Zr(IV) tungstate-based cation exchanger has been synthesized. An amorphous sample, prepared at pH 1.2 and having a Na⁺ ion exchange capacity of 0.92?meq?g^?1, was selected for further studies. Its physicochemical properties were determined using Fourier transform infrared spectrometer, X-ray diffraction, thermogravimetric, and scanning electron studies. To understand the cation exchange behavior of the material, distribution coefficients (K _d) for metal ions in various solvent systems were determined. Some important binary separations of metal ions, namely Mg²⁺–Bi³⁺, Cd²⁺–Bi³⁺, Fe³⁺–Bi³⁺, Th⁴⁺–Bi³⁺, and Fe³⁺–Zn²⁺, were achieved on such columns. The practical utility of these separations was demonstrated by separating Fe³⁺ and Zn²⁺ ions quantitatively in commercial pharmaceutical formulation. The cation exchanger has been successfully applied also for the treatment of industrial wastewater and a synthetic mixture. All the results suggests that Zr(IV) tungstate has excellent potential for the removal of metals from aqueous systems using packed columns of this material.     

Trihalomethanes formation in water treatment plants and distribution lines: a monitoring and modeling scheme

Monitoring and modeling of the concentrations of trihalomethanes (THMs) within four water treatment plants (WTPs) and distribution lines in Fayoum City, Egypt, were studied. Sampling sites for raw and treated waters were determined by global positioning system and the Arc geographic information system software was used for mapping. THMs were monitored using 25 sampling points located at the plant exit and through the distribution lines up to the plant extremity. Results indicated that the THMs concentration varied significantly but it was very rarely higher than the allowed maximum contaminant level of 100 μg L^?1. However, at the dead zones in the distribution lines, the THMs increased by about 160% compared to in-plant level. Furthermore, the level of THMs in hot months was about 1.3 times higher than in cold ones. The influence of some independent variables such as temperature, pH, ammonia concentration, total organic carbon and color were investigated by Pearson model to find their correlation with the rate of THMs formation in WTPs. The resulted R values ranged from 0.81 to 0.98. Successful application of the model to a selected region on the distribution lines has resulted in a correlation coefficient of 0.98.     

Multi-index integrated assessment and analysis of town-sewage treatment priorities in China

Water quality is one of the most serious problems of environment and national sustainable development strategy now facing China. After hard work over the last several decades, urban-sewage treatment in China is now relatively well developed. It now affords mainly higher levels of sewage collection and treatment, as well as pollution-load control. The characteristic rapid urbanization now occurring in China is still increasing and developing dramatically, and involves large numbers of people. However, in towns, sewage treatment infrastructure is inadequate, and a high percentage of the sewage generated there is not effectively collected and treated. The sewage and pollution load of such towns have become the most important reason for environmental water problems in China. To understand the priorities of sewage treatment in such towns, and their spatial distribution in China, we conducted two nationwide investigations of water use and sewage discharge in towns. Based on the integrated analytic hierarchy process (AHP), assessment indices and a framework of town-sewage treatment priorities in China were constructed. Then, we assessed and analyzed the priorities of towns regarding three aspects of sewage treatment: environmental stress, economic capability, and infrastructure. The results showed that the southeast coastal areas and north China had higher demand for sewage treatment than other areas. The demand in eastern and western areas had obvious differences in spatial distribution, but had nearly no differences within those areas. The towns having the greatest demand for high-priority sewage treatment were concentrated in regions with high economic capability and intense water resource utilization.     

The abatement of major pollutants in air and water by environmental catalysis

This review reports the research progress in the abatement of major pollutants in air and water by environmental catalysis. For air pollution control, the selective catalytic reduction of NO _x (SCR) by ammonia and hydrocarbons on metal oxide and zeolite catalysts are reviewed and discussed, as is the removal of Hg from flue gas by catalysis. The oxidation of Volatile organic compounds (VOCs) by photo- and thermal-catalysis for indoor air quality improvement is reviewed. For wastewater treatment, the catalytic elimination of inorganic and organic pollutants in wastewater is presented. In addition, the mechanism for the procedure of abatement of air and water pollutants by catalysis is discussed in this review. Finally, a research orientation on environment catalysis for the treatment of air pollutants and wastewater is proposed.     

城市污水处理厂微生物气溶胶污染和粒径分布特征

城市污水处理厂微生物气溶胶的污染与控制逐渐成为人们关注的热点问题。为明确城市污水处理厂微生物气溶胶浓度和粒径分布特征,选择鄂尔多斯市某城市污水处理厂的格栅间、配水池、氧化沟、二沉池、污泥脱水间和厂区门口6个功能区为对象,对各功能区产生的异养细菌、真菌和放线菌气溶胶浓度分布、污染特性和微生物粒子粒径分布特性进行研究。结果表明,该污水处理厂不同功能区内异养细菌、真菌和放线菌的浓度分布存在显著性差异,其中二沉池和污泥脱水间产生的异养细菌和放线菌浓度均较高,真菌浓度较高的区域为厂门口和二沉池;根据相关微生物气溶胶污染评价标准,污泥脱水间逸散的异养细菌浓度均达到污染级,二沉池、氧化沟和厂门口逸散的异养细菌浓度达轻微污染级,格栅间和配水池未受污染,而真菌浓度在各个功能区均未受到污染;各功能区产生的异养细菌、真菌和放线菌粒子粒径分布无明显差异,异养细菌、真菌和放线菌粒子粒径分别集中在第1、4级,第3、4级和第1、2、3级,大体上均呈正态分布;各功能区均逸散出一定比例的可以直接吸入人体呼吸道的微生物粒子,可能对人体健康具有一定的潜在风险。研究结果可为城市污水处理厂运行过程中微生物气溶胶的污染控制提供科学依据。