Exchange of sulfur pollution between Bulgaria and Greece

The EMAP model (Eulerian Model for Air Pollution) is applied for calculating the sulfur concentration and deposition fields for 1995 as based upon Bulgarian and Greek sources. The country-to-country budgets show that about 4% of the sulfur oxides emitted by Bulgaria are deposited over Greek territory, estimated at 28 kt S. Only 2% of sulfur compounds emitted by Greece are deposited over Bulgaria, estimated at 6.2 kt S for 1995. This data is in agreement with EMEP/MSC-W estimates and provides more details concerning time and space. The results can be used in decision-making, negotiating and the development of contamination strategies.     

负载型金催化剂用于室温下CO的消除

从催化活性、抗潮湿、抗硫中毒、稳定性等方面考察了负载型金催化剂对于ＣＯ氧化反应的性能。筛选出的２－３催化剂可在－２２℃下完全消除ＣＯ，并且在催化活性、抗潮湿、抗硫中毒、稳定性等方面具有现行催化剂无法比拟的优点。     

砷华生产废渣中硫的回收利用研究

高温下氧化焙烧细磨后的砷华生产废渣，利用软锰矿浆吸收产生的SO2气体，吸收液经净化除杂、浓缩结晶等工序可制备工业产品硫酸锰。适宜的焙烧条件如下：焙烧温度为650℃，焙烧时间为60min，废渣粒度为-97μm。选择合适的吸收工艺，Mn的浸出率可达96．20％，此时SO2脱除率为87．20％。     

挥发性有机硫化合物释放的研究与展望

在介绍硫的生物地球化学循环的基础上，概述了几种挥发性有机硫气体ＤＭＳ，ＣＯＳ，ＭＳＨ，ＣＳ２和ＤＭＤＳ从各种自然源（主要是生物源）释放的情况，着重阐述了陆地生态系统中各种生物硫源的释放情况，列举了测定这些释放的硫通量的方法，并且对有机硫气体的大气行为及环境影响也作了论述。     

硫自养反硝化过程中含硫副产物产生规律及微生物群落结构的空间分布

为探究硫自养反硝化过程中含硫副产物的产生规律,建立了上流式硫自养固定床生物反应器,考察HRT（水力停留时间）对水中NO₃--N去除的影响,运用零级和1/2级反应动力学模型对NO₃--N还原过程进行拟合,通过测定与理论计算分析含硫副产物的产生趋势及规律,利用高通量测序技术（high-throughput sequencing）测定微生物群落结构空间分布特征.结果表明:①当进水NO₃--N浓度为（30.45±0.38）mg/L,HRT为4和1 h时,NO₃--N去除率达到98%以上.硫自养反硝化过程符合1/2级反应动力学模型,1/2K_1/2V（1/2级反应动力学速率常数）为5.69 mg1/2/（L1/2·h）.②出水SO₄2-的产生量接近理论值,S2-在反应器中部出现微量的积累,在出水口处浓度进一步降低（< 0.5 mg/L）.③HRT的缩短改变了反应器内部微生物群落α多样性的变化规律;Proteobacteria成为了最主要的优势菌群,各阶段所占比例均大于59%,Sulfurimonas为最常见的反硝化菌,在HRT为1 h时,反应器中部其丰度达到36%,成为反应器中的优势菌属;Desulfurella为SRB（硫酸盐还原菌）,其丰度的增加与反应器内部S2-的积累一致.研究显示,硫自养反硝化过程中产生的SO₄2-与理论值接近,S2-产生量沿反应器高度方向呈现先增加后降低的趋势,微生物群落结构分布情况与反应器高度有关.      

Acid deposition critical loads modeling for the simulation of sulfur exceedance and reduction in Guangdong, China

The current acid deposition critical loads in Guangdong, China were calculated using the PROFILE model with a 3 km × 3 km resolution. Calculations were carried out for critical loads of potential acidity, actual acidity, sulfur and nitrogen, with values in extents of 0–3.5, 0–14.0, 0–26.0 and 0–3.5 kmol/(hm2·year), respectively. These values were comparable to previously reported results and reflected the influences of vegetation and soil characteristics on the soil acid buffering capacity. Simulations of S...     

CeO_2/Fe_2O_3对高浓度苯酚废水微波诱导的氧化催化

对高浓度苯酚废水提出了用复合催化剂CeO2/Fe2O3进行微波诱导催化氧化的降解方法,并与单一催化剂Fe2O3的催化氧化效果进行了比较,对两者的表观反应动力学进行了分析,结果表明复合催化剂的催化效果比单一催化剂的催化效果高15%以上,其主要原因是CeO2/Fe2O3复合物具有很强的催化能力和较高的干电流变活性,有利于电子的迁移和羟基自由基·OH的形成,从而有利于苯酚的氧化降解。     

闸北区大气硫酸盐化速率和二氧化硫相关性分析

硫酸盐化速率和二氧化硫都是大气含硫化合物的监测指标。通过对2006年-2008年两者监测数据的分析,可以发现总体上冬春季硫酸盐化速率和二氧化硫浓度高于夏秋季,并且两者存在一定的相关性,可以用一线性方程来表示,对硫酸盐化速率的测定和二氧化硫的监测具有指导意义,保证提供准确监测数据。     

污水管道中硫循环三阶段模型研究综述

污水在管道输送的过程中很容易出现厌氧环境,产生的硫化氢常引起恶臭、中毒和腐蚀等一系列问题。这些问题可归结为因硫元素在管道中不同相态间的迁移转化所致,该过程主要包括三个阶段：污水中硫化物的产生和扩散、硫化氢由液相到气相的逸散以及管壁上硫化氢的氧化进而引起混凝土等管道腐蚀。对这三阶段机理模型进行了归纳总结,最后在三阶段模型的基础上阐述了控制和预防硫化氢问题的方法,从而为污水输送系统的运行、管理和设计提供参考。     

Heavy metal removal from aqueous solution using carbonaceous K2S-impregnated adsorbent

A novel carbonaceous adsorbent for heavy metal removal was prepared from raw coal by one-step simple sulfur impregnation using K2S. Raw coal was mixed with K2S powder and then heated at 800°C for 30 min in nitrogen to produce K2S char. The sulfur content and form in K2S char were determined, and the ability of K2S char to adsorb Zn2+, Cd2+ and Pb2+ was examined. The K2S impregnation was e ective at impregnating sulfur into coal, especially in the form of elemental, thiophenic and sulfatic sulfur. The sulfur content of K2S char was higher than those of raw coal and pyrolysis char. The Zn2+ removal in 2.4 mmol/L of Zn2+ solution by K2S char was higher than raw coal with the removal rate of 100%. K2S char adsorbed Pb2+ and Cd2+ in 24 mmol/L of Pb2+ and Cd2+ solution with the removal rate of 97% and 35%, respectively. The elution extents of adsorbed Pb2+ and Cd2+ were zero in distilled water and 27% in 0.1 mol/L HCl solution. These results indicated that an e ective adsorbent for heavy metal ions was prepared from coal using K2S sulfur impregnation, and that the adsorbed metals were strongly retained in K2S char.