化学混凝-催化氧化法处理钻井污水

由于钻井污水经混凝处理后仍存在ＣＯＤ、色度超标问题,因此需采用其他方法深度处理污水。故采用混凝－催化氧化法工艺处理钻井污水,混凝剂为硫酸铁或聚合硫酸铁,混凝剂加量一般为２０００ｍｇ／Ｌ,初始ｐＨ值为３．０～５．０,氧化时间为３ｈ等。通过实验结果可知：该方法完全能满足钻井污水处理的要求,处理后出水可达标外排。化学混凝－催化氧化处理工艺是解决高浓度钻井污水处理ＣＯＤ、色度超标的重要途径,在技术经济上是可行的,具有广阔的应用前景     

应用SSIM模型反演与评估二氧化硫污染面源

针对在缺少有效二氧化硫低空面源排放清单的情况下,应用SSIM(SourceStrengthInversedModel)模式对SO2低空面源源强的反演功能,完成了天津市蓝天工程改燃措施实施后二氧化硫相对量化改善效果的模拟评估,同时模拟了SO2面源源强改善前后的空间分布,取得了较理想的效果。该模式所解决的污染面源源强核查难点问题,在城市大气环境容量核定中具有通用指导作用。     

煤矿居民区一氧化碳中毒事件

本文报导一起煤矿因地下燃煤产生的一氧化碳漏进入矿区居民住宅所引起的一氧化碳中毒事件。     

空气质量周报二氧化硫采样过程影响因素的探讨

文章通过对空气质量周报连续采样过程有关影响因素进行探讨 ,分析了影响大气二氧化硫监测结果的一些原因或可能 ,首次对甲醛吸收液连续采样稳定性提出疑问 ,强调周报质量保证的重心要从实验室环节转到现场采样等环节上来     

Respirometric Monitoring for the Determination of Effective Height and Reaction Rate Constant in Up-Flow Autotrophic Denitrification Reactor Packed with Sulfur

A novel technology for the removal of nitrogen from wastewater, autotrophic denitrification process with sulfur particle, has been developed. A respirometer was employed for the monitoring of nitrogen gas produced in the reactor. It was found that the autotrophic denitrification studied by gas production rate and nitrate depletion rate followed a first order reaction from the relationship. The reaction rate constant based on effective volume, k_N was ranged from 2.67 to 3.07 h^–1. The effective height was around 23.8 and 50% of the total height for 11.8 and 5.9 h of packed bed contact time, respectively. It was assumed that the reaction rate constants were similar in each experimental condition, PBCT = 11.9 and 5.9 h because there was little gradient of biomass concentration within 50% of the total height. The respirometry was found to be a simple and fast way to monitor the denitrification process. The method was especially useful for the determination of kinetic parameters.     

火电厂二氧化硫排放行为分析

火电厂是二氧化硫排放大户。从企业层面和国家层面上对火电厂二氧化硫排放行为和形势进行了分析和总结,以期为环境管理服务。     

Effect of CuO on the efficiency of sulfur capture of Ca-based compounds during coal combustion

The efficiency of sulfur capture of CaO,Ca(OH)2 and CaCO3 as well as the effect of CuO on them were studied.Resulta showed that the efficiency of sulfur capture of Ca(OH)2 is the highest among these three compounds.When CuO was used with each of CaO,Ca(OH)2 and CaCO3 at the same time,the efficiency of all of them would rise,and that of Ca(OH)2 raise most.The efficiency of sulfur capture of Ca(OH)2 with CuO is 14.4% higher than that without CuO.     

醋酸钙溶液吸收二氧化硫烟气的试验研究

介绍了醋酸钙溶液吸收二氧化硫烟气的小型试验和扩大试验,试验结果表明,醋酸钙溶液对二氧化硫有较强的吸收能力和较快的吸收速度,通过二级吸收后,烟气中二氧化硫的浓度能够低于0.05%的国家排放标准要求。     

锰铁合金炉灰资源化利用的试验研究

以锰铁合金炉灰为原料 ,分别用二氧化硫还原法和烧结法制备硫酸锰溶液 ,试验和实际研究结果表明 ,以锰铁合金炉灰为原料制备硫酸锰溶液是经济可行的。     

催化剂生产废水铵离子选择交换处理工艺

用铵离子选择交换工艺对催化剂生产过程排出的含氨氮废水进行处理。考察了再生液中NH3－N浓度、进水NH3－N浓度、进水悬浮物浓度、进水pH、再生液用量等因素对处理效果的影响；探讨了铵离子选择交换床液体空速与出水NH3－N浓度的关系、铵离子交换床总交换容量与进水NH3－N负荷之比与出水NH3－N浓度的关系。