焦炉装煤烟尘治理方案的探讨

焦炉装煤烟尘含有害物质，污染环境，危害人体健康。袋式除尘器的使用，消除了烟尘的污染，但因投资大、运行费用高、操作复杂，难以得到快速、广泛的推广。根据实验结果和已有应用情况，本文推荐了三相流化床除尘装置和颗粒层除尘器，它们可用于焦炉装煤烟尘治理，其投资和运行费用会大大降低。     

The variability and intrinsic remediation of a BTEX plume in anaerobic sulphate-rich groundwater

Data from long-term groundwater sampling, limited coring, and associated studies are synthesised to assess the variability and intrinsic remediation/natural attenuation of a dissolved hydrocarbon plume in sulphate-rich anaerobic groundwater. Fine vertical scale (0.25- and 0.5-m depth intervals) and horizontal plume-scale (>400 m) characteristics of the plume were mapped over a 5-year period from 1991 to 1996. The plume of dissolved BTEX (benzene, toluene, ethylbenzene, xylene) and other organic compounds originated from leakage of gasoline from a subsurface fuel storage tank. The plume was up to 420 m long, less than 50 m wide and 3 m thick. In the first few years of monitoring, BTEX concentrations near the point of leakage were in approximate equilibrium with non-aqueous phase liquid (NAPL) gasoline. NAPL composition of core material and long-term trends in ratios of BTEX concentrations in groundwater indicated significant depletion (water washing, volatilisation and possibly biodegradation) of benzene from residual NAPL after 1992. Large fluctuations in BTEX concentrations in individual boreholes were shown to be largely attributable to seasonal groundwater flow variations. A combination of temporal and spatial groundwater quality data was required to adequately assess the stationarity of plumes, so as to allow inference of intrinsic remediation. Contoured concentration data for the period 1991 to 1996 indicated that plumes of toluene and o-xylene were, at best, only partially steady state (pseudo-steady state) due to seasonal groundwater flow changes. From this analysis, it was inferred that significant remediation by natural biodegradation was occurring for BTEX component plumes such as toluene and o-xylene, but provided no conclusive evidence of benzene biodegradation. Issues associated with field quantification of intrinsic remediation from groundwater sampling are highlighted. Preferential intrinsic biodegradation of selected organic compounds within the BTEX plume was shown to be occurring, in parallel with sulphate reduction and bicarbonate production. Ratios of average hydrocarbon concentrations to benzene for the period 1991 to 1992 were used to estimate degradation rates (half-lives) at various distances along the plume. The estimates varied with distance, the narrowest range being, for toluene, 110 to 260 days. These estimates were comparable to rates determined previously from an in situ tracer test and from plume-scale modelling.     

宁波市城市污水处理厂污泥处置方案探讨

随着城市污水处理率提高导致的污水污泥产量的增长趋势也使得污水污泥的处理问题更为突出。在总结国内外城市污泥处置技术发展趋势的基础上,结合宁波市的实际情况,根据无害化、减量化和资源化的原则,提出城市污泥近远期处置方案,并对处置方案作出可行性分析。     

氧化亚铁硫杆菌对亚铁离子的氧化及其动力学研究

采用9K培养基研究了氧化亚铁硫杆菌氧化Fe^2＋过程中,pH和氧化还原电位的变化规律,并对Fe^2＋的氧化过程进行动力学分析,确定了其反应级数及反应速率常数。结果表明,（1）在温度为30℃,摇床转速为150r／min的条件下,氧化亚铁硫杆菌的最佳接种量为10．0％;（2）Fe^2＋初始质量浓度在11．39～21．72g／L时,随着浓度的增大,Fe^2＋达到100％转化率需要的时间增加;（3）氧化亚铁硫杆菌对Fe^2＋的氧化可近似看作一级反应,反应速率常数为0．0527～0．0788h。     

Inhibiting effects by Fe2O3 on combustion and explosion characteristics of ABS resin

The global increase in the use of, and reliance on, plastics has prompted the demand for acrylonitrile-butadiene-styrene (ABS) resin in various fields. With this increased requirement, numerous failures have occurred in the ABS process. Those incidents, resulting from electrostatic discharge, powder accumulation, heat accumulation, construction sparks, and plant fires, have caused dust fire and explosions.In this study, the ABS resin was gleaned from the site and tested for its explosion parameters, including minimum ignition temperature of dust cloud (MIT_C), minimum ignition energy (MIE), and minimum explosion concentration (MEC). To improve loss prevention in the manufacturing process, ferric oxide (Fe₂O₃) as an inert additive was added in the ABS powder. According to the MIE test, Fe₂O₃ has an apparent inhibiting effect on dust explosion for the ABS dust. With the proportion of Fe₂O₃ increased from 25 to 50 mass% in ABS, the MIE increased from 67 to 540 mJ. The explosion tests via 20-L apparatus indicated that Fe₂O₃ mixed with ABS could not increase the MEC significantly. However, the explosion pressure dropped by increasing in the ratio of Fe₂O₃ in ABS. This inerting strategy of ABS was deemed to substantially lessen the probability and severity of fire and explosion.     

Effects of release pressure on the transportation characteristics in pipeline and the diffusion behaviors in enclosure space of typical gas extinguishing agent

Reducing the release pressure of fire extinguishing systems can decrease potential safety hazards in large transport airplanes. To explore whether reducing the release pressure can achieve the release effect required by the airworthiness standards or not, the transportation characteristics in the pipeline and diffusion behaviors in the enclosure space of a typical fire extinguishing agent (Halon 1301) were investigated under five release pressures in the present study. The effects of the release pressure on the degree of superheat, injection duration, jet structure, and concentration distribution of Halon 1301 were analyzed. The results show that both of the degree of superheat and the injection duration decrease with an increase in the release pressure. The supplement of bubble expansion in the fire extinguishing agent can slow down the pressure decrease in the vessel. Both of the maximum and mean values of the pipeline differential pressure increase with an increase in release pressure. The maximum value of the jet angle decreases linearly with the increase in release pressure, and the jet deflects upward owing to the effects of buoyancy. The maximum concentration value decreases with an increase in the distance from the nozzle. The maximum concentration values in the near field from the nozzle increase with an increase in the release pressure. Under five release pressures, the concentration and holding time (duration above 6% volume concentration) of Halon 1301 on the centerline of the jet meet the requirements of airworthiness provisions.     

基于化工园区整体风险量分析的安全规划研究

通过对园区安全容量和危险量的分析,得到园区整体的风险评估值;提出并定义园区危安比最大临界点,用其反映园区的最大可接受风险量;运用"二八法则",确定危安比上限;当危安比在3种不同值域区间下,对应的园区安全规划的重点不同;从园区整个生命周期考虑,提出包含各个阶段的园区安全规划主要内容。     

细砂卵砾石互层隧道围岩-支护失稳成因和处治措施

为避免细砂卵砾石互层隧道施工中发生隧道坍塌、砂涌、冒顶等安全事故,以在建的国道317线岗托隧道为工程依托,采用三维数值模拟计算和现场测试相结合的方法进行分析,探讨了施工过程中隧道围岩-支护的失稳机理,提出了相应的处治措施,最后通过对失稳前和处治后拱顶下沉、水平收敛的测试比较验证了处治效果。结果表明,细砂卵砾石互层隧道围岩-支护失稳的原因是围岩自稳能力差,超前支护适宜性差致使互层围岩不能有效固结,砂涌造成衬砌背后空洞,致使结构承载力降低,现场采用大管棚配合水平旋喷桩进行超前支护,实施效果明显。     

User involvement in the ergonomic development of a medical instrument: a longitudinal case study

In this study the focus is on the continuous ergonomic-focused development of a medical instrument that is capable of performing blood group serological tests. Primarily, a medical device must be clinically effective and safe. At the same time it must also meet the needs of its users. This calls for consideration of numerous ergonomic aspects. The development process of the product line in question was supported by a longitudinal series of carefully designed focus groups. Altogether, the 23 focus groups conducted included 245 participants from 72 laboratories. The aim of the empirical research was to collect users’ experiences, ideas and needs as inputs for the following phase of the product development process. During the mentioned focus group analyses, around 100 development proposals were conceived. Besides presenting more of the mentioned development proposals, the focus group analysis was shown as a proper methodology to involve end-users in the development and implementation of new technology or devices.     

Social identity and applicant attraction: Exploring the role of multiple levels of self

Applicant attraction is a critical objective of recruitment. Common predictor variables of applicant attraction are limited in that they do not provide a comprehensive understanding of the process that shapes the perceptions and beliefs of job applicants about the firms for which they aspire to work for. Because individuals have the inherent desire to expand and enhance their social identities (e.g., personal, relational, and collective identities), they are likely to be attracted to organizations that allow them to do so. Building on recent work on levels of self, our paper suggests that social identities mediate the relation between currently established predictor variables of applicant attraction (e.g., compensation, type of work, and organizational image) and important applicant attraction outcomes. Common predictor variables of applicant attraction can lead to the activation, evaluation, and identification processes described by social identity theory. A theoretical framework is presented that illustrates the mediating influence of social identity on the relations between common predictor variables and applicant attraction outcomes. This framework may lead to more effective recruitment strategies. Copyright © 2015 John Wiley & Sons, Ltd.