TiO2介孔球的合成及其对双酚A的光催化降解

以不同的含钛化合物作为原料,在无模板条件下经一步溶剂热法合成了两种TiO2介孔球——TiO2-1和TiO2-2。对两种TiO2介孔球的形貌进行了表征,结果表明:TiO2-1和TiO2-2粒径分别为5.7 nm和8.0 nm;比表面积分别为159.4 m2/g和128.3 m2/g;孔径约为4.0 nm和5.0 nm。采用P25型TiO2、TiO2-1和TiO2-2对双酚A溶液进行光催化降解反应。在催化剂加入量为0.5 mg/L的条件下降解60 min,双酚A去除率分别为76.3%,99.7%,98.5%。TiO2-1和TiO2-2的光催化效果优于P25型TiO2,且TiO2-1的光催化效果更好。     

Long Term Trends in Sulphur and Nitrogen Deposition in Europe and the Cause of Non-linearities

Emissions of sulphur and oxidized nitrogen compounds in Europe have been reduced following a series of control measures during the last two decades. These changes have taken place during a period in which the primary gases and the wet deposition throughout Europe were extensively monitored. Since the end of the 1970s, for example land based sulphur emissions declined by between 90 and 70% depending on the region. Over the same period the total deposition of sulphur and its partitioning into wet and dry deposition have declined, but the spatial pattern in the reduction in deposition differs from that of emission and has changed with time. Such non-linearities in the emission-deposition relationship are important to understand as they complicate the process of assessing the effects of emission reduction strategies. Observed non-linearities in terrestrial sulphur emission-deposition patterns have been identified in north west Europe due to increases in marine emissions, and are currently slowing the recovery of freshwater ecosystems. Changes in the relative amounts of SO₂ and NH₃ in air over the last two decades have also changed the affinity of terrestrial surfaces for SO₂ and have therefore changed the deposition velocity of SO₂ over substantial areas. The consequence of this effect has been the very rapid reduction in ambient SO₂ concentration in some of the major source areas of Europe, where NH₃ did not change much. Interactions between the different pollutants, generating non-linearities are now being incorporated in long-range transport models to simulate the effects of historical emission trends and to provide projections into the future. This paper identifies non-linearities in emission deposition relationships for sulphur and nitrogen compounds in Europe using data from the EMEP long-rang transport model and measured concentration fields of the major ions in precipitation and of SO₂ and NO₂ in surface air.     

Long Term Trends in Concentration of Major Pollutants (SO<Subscript>2</Subscript>, CO,NO, NO<Subscript>2</Subscript>, O<Subscript>3</Subscript> and PM<Subscript>10</Subscript>) in Prague – Czech Republic (Analysis of Data Between 1992 and 2005)

To assess the effect of changes in traffic density and fuels used for heating at the beginning of the 1990s, 1992–2005 monthly averages of PM₁₀, SO₂, NO₂, NO, CO and O₃ from Prague, the Czech capital, were analyzed together with long term trends in emissions of major pollutants, fuel consumption and number of vehicles registered in Prague. The data from all monitoring stations were retrieved from the database of the state automated monitoring system. Correlation coefficients between ambient monthly averaged temperature and all pollutants of concern showed distinct seasonal trends. The results showed that while SO₂ and to some extent also CO concentrations dropped namely in the first half of the analyzed period (1992–1997) as a result decreased fossil fuel consumption for local heating, the behaviour of other pollutant concentrations followed a different pattern. PM₁₀ concentrations decreased during the beginning of the 1990s but showed a sign of increase after 2000. Concentrations of ozone and NO₂ did not reveal any significant change throughout the whole studied period. It can be concluded that during the studied period traditional urban sources of pollution, such as coal and oil combustion, lost their importance but were simultaneously substituted by pollutants from automotive transport (namely PM and NO₂) making the problem of air quality even worse.     

后石油时代沙生灌木直燃发电对环境的影响＊

文章通过对内蒙古中西部地区沙生灌木的成分分析,基于生命周期法(LCA),定量论证了沙生灌木直燃发电开发模式对环境的影响和推广的可行性,指出相比石油等传统能源,这种模式具有较大的潜在效益,对于我国发展绿色替代能源,促进西部地区生态环境和经济协调发展具有一定的战略意义。     

中国碳捕集、利用与封存技术发展与展望

实现“双碳”目标是我国应对气候变化的重大决策,也是我国生态文明建设的重要内容。碳捕集、利用与封存(Carbon Capture,Utilization and Storage,CCUS)技术是实现“双碳”目标的关键性技术,也是我国达成二氧化碳零排放的保障性措施。本文简要介绍了CCUS主要环节的技术流程,概括了我国CCUS技术的发展历程。从技术水平、国家政策、示范项目情况等多个角度,总结了现阶段我国CCUS技术的整体研究与发展水平。并根据我国能源供给模式、工业发展水平等因素,分析并阐明了我国CCUS技术发展的必要性,以及现阶段CCUS技术发展所面临的挑战。最后本文还从行业角度出发,将CCUS技术与油气、建筑、农业、化工多种重点行业结合,提出了具体可行、互促互利的CO₂转化利用模式,为实现CCUS的商业化运行、保证CCUS技术的可持续发展提供了思路。     

掺钴水钠锰矿对铅的吸附及对砷的氧化

为了研究过渡金属离子掺杂对锰氧化物作为环境友好材料物理化学性质的影响,在浓盐酸还原高锰酸钾制备水钠锰矿过程中添加氯化钴,在常压回流条件下一步合成了三维纳米微球状水钠锰矿,考察了其铅吸附和砷氧化能力.应用粉晶X射线衍射、化学分析、N2物理吸附、场发射扫描电镜（FE-SEM）、X射线光电子能谱（XPS）等手段表征产物晶体结...     

CeO2负载型双金属Pd/Fe催化还原四氯化碳的实验研究

实验采用共沉淀法制得CeO_2负载型双金属Pd/Fe催化剂,并对催化剂的结构特征进行了X射线衍射(XRD)和扫描电子显微镜(SEM)分析.使用负载型双金属催化剂对四氯化碳进行还原脱氯研究,探究了温度、溶液初始pH值、催化剂投加量及不同钯载率对四氯化碳脱氯的影响;对比了不同催化剂包括纳米零价铁、纳米钯铁双金属和CeO_2负载型双金属Pd/Fe对四氯化碳的脱氯效果.实验结果表明负载型双金属催化剂在温度为40℃,溶液初始pH为6.5,催化剂投加量为0.4 g·L-1,钯载率为0.5%的条件下,对初始浓度为5 mg·L-1的四氯化碳的去除率高达99.88%.在相同的反应条件下,纳米零价铁和纳米钯铁双金属对四氯化碳的脱氯率分别为58.25%、87.94%.此外,对四氯化碳的脱氯机制进行了探讨.     

2006~2010年珠三角地区SO2特征分析

对广州番禺大气成分站2006~2010年期间的SO2资料进行了分析,讨论了珠江三角洲(珠三角)地区地面SO2体积分数的年、季节、月、日变化特征和概率的分布特征.珠三角地区地面SO2变化特征的分析结果表明,2010年地面SO2体积分数的总体水平相对近年来有一定下降,高浓度事件发生频率降低;冬、春季SO2各项统计值要高于夏、秋季,干季明显高于湿季,可能与大气边界层高度和太阳辐射等因素的季节性变化相关;SO2干湿季的日变化趋势相仿,日最高峰时间相同,只是湿季达次高峰和最低点的时间比干季要提前1 h,这可能与季节性的大气边界层高度和辐射强度变化,以及日照时间长度有关;SO2体积分数的概率分布特征比较复杂,各月谱型分布各有不同,可能与季节性因素的变化规律相关.     

人工片状钙基脱硫剂的试制及其性能研究

介绍了用于沸騰炉燃煤锅炉脱硫的人工片状钙基脱硫剂的生产工艺,并用固定床反应器、压汞仪,扫描电子显微镜、强度仪等研究了该脱硫剂的物理化学特性。实验表明,采用该工艺生产的脱硫剂具有良好的抗压抗磨强度和耐水性,由于具有合理的孔分布,其固硫能力是石灰石的2—3倍,钙利用率可达40％,适用于850℃—1000℃的较宽温度范围。在3台沸腾炉共7个工况下的工业实验证明了该脱硫剂的上述特性。     

二氧化氯对颤蚓的灭活效果及机理初步探讨

供水系统中蠕虫类水生生物的出现严重危及供水水质安全.为实现供水系统中蠕虫风险的高效控制,以颤蚓为研究对象,探讨了二氧化氯对颤蚓的灭活动力学及水质对灭活效果的影响,并对灭活机理进行了初步探讨.结果表明:CT值(氧化剂浓度和接触时间的乘积)可以较好地用于评价ClO_2对颤蚓的灭活效果;灭活过程符合伪一级延迟Chick-Watson模型.温度的升高缩短了颤蚓灭活时的"延滞期",并提高了灭活效率;实验条件下,体系pH的增加有助于提高ClO_2灭活效率;浊度和有机物浓度的增加会导致灭活效率显著降低.当CT值超过80 mg·min·L~(-1)后,ClO_2将导致体系蛋白质浓度显著降低.颤蚓灭活过程中"延滞期"的出现和蛋白试验结果综合表明:颤蚓表皮层的存在有助于提高其对ClO_2的耐受性.SOD(超氧化物歧化酶)活性变化表明,ClO_2灭活颤蚓的主要作用机理之一是含氧自由基的诱导效应.