Large-scale turbulent structure of uniform shallow free-surface flows

The hydrodynamics of super- and sub-critical shallow uniform free-surface flows are assessed using laboratory experiments aimed at identifying and quantifying flow structure at scales larger than the flow depth. In particular, we provide information on probability distributions of horizontal velocity components, their correlation functions, velocity spectra, and structure functions for the near-water-surface flow region. The data suggest that for the high Froude number flows the structure of the near-surface layer resembles that of two-dimensional turbulence with an inverse energy cascade. In contrast, although large-scale velocity fluctuations were also present in low Froude number flow its behaviour was different, with a direct energy cascade. Based on our results and some published data we suggest a physical explanation for the observed behaviours. The experiments support Jirka’s [Jirka GH (2001) J Hydraul Res 39(6):567–573] hypothesis that secondary instabilities of the base flow may generate large-scale two-dimensional eddies, even in the absence of transverse gradients in the time-averaged flow properties.     

催化湿式过氧化氢氧化处理垃圾渗滤液及其DOM光谱分析

采用催化湿式过氧化氢氧化法对转运站垃圾渗滤液进行了处理,研究了影响催化湿式过氧化氢氧化效果的多个因素,并采用三维荧光和紫外-可见光谱对催化湿式过氧化氢氧化处理后水样中的溶解性有机物(DOM)成分变化进行了表征分析.结果显示,在最优实验条件下,COD去除率可达90%以上.光谱分析结果表明,渗滤液中的DOM组分降解效果明显,含有芳香环、双键和羰基共轭体系的有机物的去除效果也比较显著.     

基于不同光谱主导因子的内陆湖泊水体叶绿素浓度三波段反演模型研究

利用分层聚类法,对实测的遥感反射率进行分类,结合固有光学特征和实测的水色要素,确定每种类别遥感反射率光谱变化的主导影响因子.根据太湖、滇池、三峡库区及巢湖的地面遥感实验,将其遥感反射率分为3类,类型一的光学特性由总悬浮物和浮游藻类共同主导,类型二的光学特性由浮游藻类主导,类型三的光学特性由悬浮物主导.根据每类水体光学特征的差异,分别建立叶绿素浓度的三波段反演模型,反演的平均相对误差为23.8%,均方根误差为8.5 mg/m3,其反演精度要高于未经分类而直接建立的三波段模型.     

Assessment of aerial spray deposits in a spruce forest using in‐flight microencapsulation technique

Abstract

Spray drops were counted and sized on Kromekote® cards at ground level, and on spruce foliage at canopy level, after aerial application of a formulation containing a microencapsulation medium, over a spruce forest in Ontario. The majority of drops (70%) on foliage was 20 ‐ 75 µm range. A coarse drop size spectrum was observed on cards with a maximum diameter (Dmax) of 380 µm, and with 85% of the drops = 130 µm in diameter. Foliar drop analysis, on the other hand, indicated a finer spectrum with a Dmax of 150 µm, and with 85% of the drops = 75 µm. These results were explained on the basis of formulation ingredients, atomizer setting, weather factors, and drop retention on target surfaces. The assessment of spray deposits on glass plates at ground level indicated that about 16% of the applied spray volume reached the forest floor, a value which is comparable to those obtained in previous forestry applications using the ultra‐low‐volume (ULV) technique.     

Influence of additives in the end‐use mixes of tebufenozide on deposition,adhesion and persistence in spruce foliage

Abstract

A commercial flowable formulation of tebufenozide, RH‐5992 2F [N'‐t‐butyl‐N'‐(3,5‐dimethylbenzoyl)‐N‐(4‐ethylbenzoyl) hydrazine], was diluted with water, water and canola oil, and water and the methyl ester of canola oil, to provide six end‐use mixes with concentrations of 35 and 70 g of active ingredient (Al) litre^‐1. The mixes were applied at 70 and 140 g Al ha^‐1 over white spruce [Picea glauca (Moench) Voss] seedlings in a laboratory spray chamber and foliar concentrations of tebufenozide were determined over a 60‐d period. At intervals of time post‐spray, seedlings were sprayed with monosized droplets of Sunspray®11N as rainfall, and the amount of tebufenozide knocked off from foliage was determined. The potential energy of adhesion (PEA) of the Al particles on the foliage increased with time and varied according to the type of end‐use mix, its viscosity and the dosage sprayed.

The end‐use mixes were applied over white spruce trees under field conditions and persistence of tebufenozide was investigated. DT₅₀ values were influenced by the type of mix and dosage sprayed. Oil‐containing mixes and higher dosages increased the PEA of tebufenozide particles.     

DFT M06-2X investigation of alkaline hydrolysis of nitroaromatic compounds

The nitroaromatic compounds 2,4,6-trinitrotoluene (TNT), 2,4-dinitrotoluene (DNT) and 2,4-dinitroanisole (DNAN) are potential environmental contaminants and their transformations under a variety of environmental conditions are consequently of great interest. One possible method to safely degrade these nitrocompounds is alkaline hydrolysis. A mechanism of the initial stages of this reaction was investigated computationally. Simulations of UV-VIS and NMR spectra for this mechanism were also produced. The results obtained were compared to available experimental data on the alkaline hydrolysis of TNT and suggest that the formation of Meisenheimer complexes and an anion of TNT are potential first-step intermediates in the reaction path. As the reaction proceeds, computational results indicate that polynegative complexes dominate the degradation pathway, followed by cycles of carbon chain opening and breaking. A second possible pathway was identified that leads to polymeric products through Janovsky complex formation. Results from this study indicate that the order of increasing resistance to alkaline hydrolysis is TNT, DNT and DNAN.     

不同垃圾渗滤液组合处理工艺中DOM的变化特征

为了快速表征垃圾渗滤液处理过程中有机物的特性变化,分别采用紫外光谱和三维荧光光谱对2种垃圾渗滤液处理工艺不同单元溶解性有机物(DOM)的变化进行了系统分析。结果表明,二级RO和厌氧+好氧+MBR+NF+RO工艺对渗滤液COD和NH3-N的去除率分别为98.7%、99.0%和98.8%、98.6%。随着处理过程的进行,2个处理工艺中DOM的SUVA254、E253/E203分别由0.74、0.33和0.46、0.12下降至0.015、0.014和0.010、0.012,有机物的芳香性和不饱和性下降,脂肪链芳香烃化合物开始增加。不同处理阶段渗透液DOM三维荧光光谱表明,随着处理过程的进行,类富里酸和类蛋白物质的含量逐渐下降,芳构化程度开始降低。其中二级RO系统对渗滤液中类富里酸物质的去除效果较好,而厌氧-好氧-MBR-NF-RO工艺中,类酪氨酸物质主要通过微生物降解去除,NF和RO膜对类富里酸和类腐殖酸物质的截留效果较好。     

La_2O_3-TiO_2的制备及其光催化性能

采用溶胶-凝胶法制备了La2O3-Ti O2光催化剂;运用XRD,UV-Vis DRS,BET技术对光催化剂进行了表征;并以太阳光为光源,研究了不同制备条件及光反应条件下La2O3-Ti O2对罗丹明B的降解效果。实验结果表明:最佳制备条件为镧掺杂量(硝酸镧与钛酸丁酯的质量比)0.9%、焙烧温度500℃、焙烧时间2 h;该条件下制备的光催化剂为中孔结构(平均孔径3.867 nm),禁带宽度小(2.07 e V),Ti O2为锐钛矿相;在光催化剂投加量为2 g/L、溶液p H为3的最佳光反应条件下反应4 h,La2O3-Ti O2对罗丹明B的降解率达99.7%,远高于N-Ti O2的42.0%;重复使用5次的La2O3-Ti O2光催化剂仍对罗丹明B保持较高的降解率(98.5%)。     

Leaching and persistence of ametryn and atrazine in red–yellow latosol

This study evaluated the mobility and persistence of atrazine and ametryn in red–yellow latosols using polyvinyl chloride columns with a diameter of 100 mm and a height of 15 cm. The assays simulated 60-mm rainfall events at 10-day intervals for 70 days. The persistence and leaching were evaluated for these two herbicides. The analytes obtained from the samples were quantified by gas chromatography using flame ionization detection. Compared with ametryn, atrazine showed a greater potential to reach depths below 15 cm over 30 days of simulated rain. Ametryn, however, showed greater persistence in soil at 70 days after application. The persistence of atrazine and ametryn in soil under sunlight was 10 and 144 days respectively. Atrazine was more susceptible to sunlight than ametryn because sunlight favored atrazine degradation in hydroxyatrazine. The results indicate that in red–yellow latosol, atrazine has a high leaching potential in short term, but that ametryn is more persistent and has a high leaching potential in long term.     

Effect of additives in the Neem formulations on deposition,volatilization and persistence of Azadirachtin in spruce foliage

Abstract

Foliar deposits, volatilization and persistence of azadirachtin‐A (AZ‐A) were investigated after application of four spray mixes prepared from a wettable powder (WP) and three emulsifiable concentrate (EC) formulations of neem. They were applied at the dosage rate of 50 g AI in 4 L/ha onto potted spruce seedlings in a laboratory spray chamber. Droplet‐size spectra and deposits were assessed using Kromekote^® card/glass plate collection units. Foliar residues [dislodgeable residues (DR), penetrated residues (PR) and total residues (TR)] of AZ‐A and their volatilization were measured by HPLC at different intervals of time up to 60 h after treatment. Differences in the droplet‐size spectra and deposit levels were observed among the four spray mixes due to the influence of additives present in them. Dissipation half‐lives (DT₅₀) of the DR, PR and TR in the foliage were low (range, 19.5 to 38.9 h) and varied according to the residue type and the spray mix used. The DT₅₀ values of the DR were consistently lower (range, 19.5 to 31.9 h) than those of the PR (range, 30.5 to 38.9 h) due to preferential loss of the surface residues. The low DT₅₀ values observed for the DR and TR in the foliage sprayed with the WP spray mix were attributed to the particulate nature of the deposit. AZ‐A volatilized appreciably from the DR rather than from the PR. The variations found in the amounts of AZ‐A volatilized (42 to 58%) and unaccountable (38 to 46%) from the initial TR values in spruce foliage, after 60 h, were attributed to the physical form of the deposits on the target surface and the influences of additives present in the different spray mixes.