陕西老厂铅锌矿床成矿流体特征及其地质意义

陕西老厂铅锌矿床是一个与海相火山岩有关的块状硫化物矿床。老厂铅锌矿床石英流体包裹体的均一温度为93.3~396.5℃,平均值为235.9℃;盐度为0.4~22.5wt%NaCl,平均值为9.9wt%NaCl。原生流体包裹体均一温度测定结果表明其具有近似正态分布的特点;石英流体包裹体的盐度表明,其不成正态分布,且盐度较低。老厂矿床δDV-SMOW‰和δ18 OH2O‰的组成关系反映了其成矿流体为混合热液来源。     

热强化气相抽提对不同质地土壤中苯去除的影响

研究应用电阻加热强化气相抽提技术对砂土、壤土和黏土中苯去除效果的影响及作用机制.与常规抽提结果相比,在热强化处理作用下气相抽提对砂土和壤土中苯的去除效率提高了13.1%和12.3%,处理时间分别降低75%和14%.热强化处理使得黏土含水率下降,土壤渗透率升高,黏土颗粒表面羧基和乙基的吸收峰消失,有机质含量减少,苯的去除效率与对照相比提高了34%.对于砂土和壤土,热强化主要是通过促进苯在土体中扩散来提高去除效率,从而实现在较短时间内污染物质的大量去除;而对于黏土则是通过降低土壤颗粒表面有机基团的含量,从而降低污染物和土壤颗粒的吸附能力,并通过降低含水率和升高渗透率从而提高土壤中气体的扩散性能,以达到增强气相抽提效果的目的.     

固相萃取-高效液相色谱法测定水中丙烯酰胺研究

采用固相萃取-高效液相色谱法对水中的丙烯酰胺定性、定量分析。结果显示:丙烯酰胺含量在20μg/L~400μg/L之间呈良好线性关系,回归方程Y=0.476 8X+0.845 4,相关系数R为0.997 72,检出限0.1μg/L,样品回收率在71.85%~92.28%之间,相对标准偏差为3.4%~10.9%。该方法减少了有机溶剂用量,缩短了有机溶剂暴露时间,降低污染,且能满足地表水环境质量标准(GB 3838-2002)限值要求,是水中丙烯酰胺含量准确稳定的检测方法。用该方法测定了呼和浩特市引黄入呼左岸、右岸、中浅和中深4个断面水样,均未检出丙烯酰胺。     

柠檬酸对砷污染土壤的萃取优化条件实验研究

论文以新邱矿矸石山排土场土壤为研究对象,以去离子水做空白试验,选取尿素、十二烷基磺酸钠、碳酸氢钠、醋酸、柠檬酸等12种化学试剂做了萃取剂初选试验;并以柠檬酸为萃取剂进行了三因素三水平L9(33)正交实验。实验结果表明:柠檬酸和氢氧化钠可作为砷污染土壤的萃取剂,具有良好的萃取效果。柠檬酸作为砷污染土壤萃取剂的最优化条件是液土比为10mL/g,萃取时间为12h,萃取剂浓度为0.1mol/L。实验结果可为砷污染土壤的治理提供参考。     

L形和U形三维钝体结构绕流的数值模拟研究

采用大涡模型对L形和U形三维钝体建筑物的绕流特性和风压分布特性进行数值研究.考虑平均和脉动速度入口边界,在雷诺数为1.5×105～7×105条件下,对2种钝体的9种分析工况进行瞬态动力分析,并将计算结果与已有研究进行对比.研究表明,钝体绕流对周围流场影响的强弱程度依次为尾流区、屋顶区、来流区,影响大小随着流场与钝体之间...     

Selective extraction and separation of Fe, Mn oxides and organic materials in river surficial sediments

In order to investigate the adsorption mechanism of trace metals to surficial sediments （SSs）, a selective extraction procedure was improved in the present work. The selective extraction procedure has been proved to selectively remove and separate Fe, Mn oxides and organic materials （OMs） in the non-residual fraction from the SSs collected in Songhua River, China. After screening different kinds of conventional extractants of Fe and Mn oxides and OMs used for separation of heavy metals in the soils and sediments, NH2OH .HCl （0.1 mol/L） ＋ HNO3 （0.1 mol/L）, （NH4）2C2O4 （0.2 mol/L） ＋ H2C2O4 （pH 3.0）, and 30% of H2O2 were respectively applied to selectively extract Mn oxides, Fe/Mn oxides and OMs. After the extraction treatments, the target components were removed with extraction efficiencies between 86.09%--3.36% for the hydroxylamine hydrochloride treatment, 80.63%- 101.09% for the oxalate solution extraction, and 94.76%-102.83% for the hydrogen peroxide digestion, respectively. The results indicate that this selective extraction technology was effective for the extraction and separation ofFe, Mn oxides and OMs in the SSs, and important for further mechanism study of trace metal adsorption onto SSs.     

瓦斯抽采PC-CAS基封孔材料优化及其膨胀作用分析*

为了研制以硅酸盐/铝酸盐水泥、生石灰、生石膏为主的PC-CAS基封孔材料,采用正交试验优化材料配比、开展膨胀力研究,并用扫描电镜观测料-煤胶结形貌。研究结果表明:材料的最优配比为A2B2C4,其具备优良的流动性、强度及致密性,造浆量达2 100 mL/kg;PC-CAS基材料具有显著的膨胀性,其膨胀力随时间先增大而后趋于稳定,并且该膨胀力随着径向约束的提高而增大;相比于FP材料,PC-CAS基材料产生的膨胀力能够显著降低材料-煤岩界面的空隙并在一定程度上压密煤体内部的裂隙;该材料产生的膨胀力可压密封孔段围岩、提高封孔质量,并为后期“二次注浆”提供保压条件。工业试验结果表明,采用PC-CAS基材料进行封孔可显著改善抽采效果,将原有平均浓度10.11%提升至20.08%。     

隧道救援站通风网络优化设计及人员疏散研究*

为确定铁路隧道救援站最佳通风结构,对烟道布置提出合理建议,采用计算流体力学（CFD）的方法,对铁路隧道救援站通风网络进行优化设计。同时,采用模拟计算的方法对救援站人员疏散进行模拟分析,确定救援横通道布置及防护门开度设置的合理性。研究结果表明:在同等通风参数工况设置下,采用多节点排烟竖井结构后各救援横通道流量分配更均匀,救援站压力平衡性更好,通风效率可提升15%;通过疏散模拟证实,在长560 m的紧急救援站范围内设置10条疏散横通道,横通道设1.7 m宽的逃生门能够满足疏散要求。     

Recent application of Computational Fluid Dynamics (CFD) in process safety and loss prevention: A review

In recent years, significant progress has been made to ensure that process industries are among the safest workplaces in the world. However, with the increasing complexity of existing technologies and new problems brought about by emerging technologies, a strong need still exists to study the fundamentals of process safety and predict possible scenarios. This is attained by conducting the corresponding consequence modeling and risk assessments. As a result of the continuous advancement of Computational Fluid Dynamics (CFD) tools and exponentially increased computation capabilities along with better understandings of the underlying physics, CFD simulations have been applied widely in the areas of process safety and loss prevention to gain new insights, improve existing models, and assess new hazardous scenarios. In this review, 126 papers from 2010 to 2020 have been included in order to systematically categorize and summarize recent applications of CFD for fires, explosions, dispersions of flammable and toxic materials from accidental releases, incident investigations and reconstructions, and other areas of process safety. The advantages of CFD modeling are discussed and the future of CFD applications in this research area is outlined.     

基于ZIF-L的微固相萃取技术测定地表水中痕量典型多环芳烃

制备类沸石咪唑酯骨架ZIF-L材料,将其用作微固相萃取吸附剂,处理水中萘、苊、苊烯、芴、菲、蒽、荧蒽、芘等8种痕量典型多环芳烃,再用HPLC测定。试验表明,ZIF-L对上述多环芳烃的萃取效率明显高于商品化萃取材料C 18和多壁碳纳米管。方法在0.100μg/L^200μg/L范围内线性良好,方法检出限为0.02μg/L^0.03μg/L,标准溶液5次测定结果的RSD为4.7%~9.5%,实际水样加标回收率为84.5%~115%。将该方法用于北太湖5个点位水样的测定,测定值为未检出~3.40μg/L。