氯代挥发性有机物CVOCs催化氧化的研究进展

氯代挥发性有机物(CVOCs)因其性质稳定、反应性差且毒性高,成为目前大气污染物净化技术中的难点。催化氧化法是去除CVOCs最有效的方法之一。对CVOCs催化氧化的研究进行综述,列举实例介绍了各类催化剂对常见CVOCs的催化研究现状,对催化性能、催化剂失活、反应机理等方面进行了详细分析,总结出积碳和氯中毒是催化剂失活的两大主要因素,而载体性质、活性组分分散度、水等对催化性能产生很大影响。最后,展望了未来催化剂的研究重点。     

TiO2–PANI/Cork composite: A new floating photocatalyst for the treatment of organic pollutants under sunlight irradiation

A novel photocatalyst based on TiO_2–PANI composite supported on small pieces of cork has been reported. It was prepared by simple impregnation method of the polyaniline(PANI)–modified TiO_2 on cork. The TiO_2–PANI/Cork catalyst shows the unique feature of floating on the water surface. The as-synthesized catalyst was characterized by X-ray diffraction(XRD),scanning electron micrograph(SEM), transmission electron microscopy(TEM), thermogravimetric analysis(TGA), Fourier transform infrared spectroscopy(FT-IR), UV–vis diffuse reflectance spectra(UV–vis DRS) and the Brunauer–Emmett–Teller(BET) surface area analysis. Characterization suggested the formation of anatase highly dispersed on the cork surface. The prepared floating photocatalyst showed high efficiency for the degradation of methyl orange dye and other organic pollutants under solar irradiation and constrained conditions, i.e., no-stirring and no-oxygenation. The TiO_2–PANI/Cork floating photocatalyst can be reused for at least four consecutive times without significant decrease of the degradation efficiency.     

CuSnZr三元催化剂应用于NTP强化催化脱硫过程的特性

为高效地在低温下处理大量低浓度电解铝烟气, 采用浸渍法制备了Sn Zr型金属氧化物并添加Cu作为助剂的催化剂, 并首次测试了它在低温等离子体(NTP)技术上的脱硫效果, 结果表明负载了20wt% Cu老化温度为40℃的催化剂表现出最佳的脱硫性能.并对强化之后的催化剂进行了表征, 与新鲜的催化剂对比, X射线衍射分析(XRD)结果表明放电对催化剂晶型基本不产生影响; 扫描电子显微镜(SEM), 氮吸附和脱吸(BET)表明放电会使催化剂的吸附脱附能力与孔道结构有较大提升; X射线光电子光谱(XPS)也表明放电会使催化剂表面元素价态变化, 从而使其氧化还原性能改变, 反应路径发生偏向; 催化剂性能理论计算表明铜含量的上升会导致催化剂能带结构改变, 更好利用于激发气体.     

Semi-closed synthesis of nitrogen and oxygen Co-doped mesoporous carbon for selective aqueous oxidation

Heteroatom-doped meso/micro-porous carbon materials are conventionally produced by harsh carbonization under an inert atmosphere involving specific precursors, hard/soft templates, and heteroatom-containing agents. Herein, we report a facile synthesis of N and O co-doped meso/micro-porous carbon (NOMC) by template-free carbonization of a small-molecule precursor in a semi-closed system. The semi-closed carbonizaiton process yields hydrophilic NOMCs with large surface area in a high yield. The porous structure as well as the elemental composition of NOMCs can be modulated by changing the holding time at a particular temperature. NOMCs as metal-free heterogeneous catalysts can selectively oxidize benzyl alcohol and its derivatives into aldehydes/ketones with>85％conversion in aqueous solution, which is much higher than that of the control sample obtained in tube furnace (21％conversion), mainly due to their high N content, high percentage of pyridinic N, and large surface area. The presence of O-containing moieties also helps to improve the hydrophilicity and dispersion ability of catalysts and thus facilitates the mass transfer process during aqueous oxidation. The NOMC catalysts also dispayed excellent activity for a wide range of substrates with a selectivity of>99％.     

An assessment of how distance and diesel oxidation catalyst will impact thermal decomposition behaviors of particles

Decomposition mass loss and pyrolysis products analyses of particles sampled at various locations along the tailpipe of a Euro-IV diesel engine were performed using a thermogravimetry in conjunction with Fourier transformation infrared spectrometry-mass spectrum. Diesel particles were collected at the same location with and without diesel oxidation catalyst (DOC) mounted on the test engine separately. The three poles in thermal gravity-differential thermal gravity images suggested that the decomposition process of diesel particles could be divided into three stages which correspond to the decompositions of lower boiling substances, higher boiling substances and soot respectively. It is noticed that no matter whether DOC was mounted or not, the further the particles were sampled away from the engine block, the lower the peak temperatures and the heavier the mass losses within the first two stages, which indicated that the soluble organic fraction in the particle samples increased and therefore lowering the activation energy of thermal decomposition. Hydroxyl, ammonia, C_xH_y fragments, benzene, toluene, and phenol were found to be the primary products of particle decomposition, which didn't change with the location of particle sample point. The employment of DOC increased the activation energy for particle oxidation and resulted in a higher peak temperature and lower mass loss within the first-stage. Moreover, the CO stretching bands of aldehyde and ketone at 1771 cm^?1 was only detected without a DOC, while the NO₂ peak at 1634 cm^?1 was solely noticed with the presence of DOC. Compared to the first-stage pyrolysis products, more polycyclic aromatic hydrocarbons and less C_xH_y fragments were seen in the second-stage.     

含氨氮催化剂生产废水的处理

采用加入淀粉的短程硝化-反硝化一体化技术处理低碳含NH3-N催化剂废水。通过中试确定了适宜的工艺参数,并在工业化装置上进行了验证。试验结果表明：在DO为0.5 mg/L左右、淀粉加入量为0.25 kg/ m3、HRT=30 h的条件下,短程硝化-反硝化一体化技术具有较好的处理效果,NH3-N去除率大于97%,且具有较强的抗冲击负荷的能力; 出水的COD<100 mg/L,ρ（NH3-N）<10 mg/L,达到GB 8978—1996《污水综合排放标准》的一级排放标准。工业化装置的运行费用以NH3-N计为2.3 元/kg、以废水计为4.6 元/t。该法适用于中低浓度（ρ（NH3-N）<300 mg/L）废水的处理。     

改性Y沸石催化降解聚苯乙烯的研究

用热重分析方法研究了HY沸石与改性Y沸石(UHY)作为催化降解聚苯乙烯的催化剂对聚苯乙烯催化降解的作用及影响,对聚苯乙烯的催化降解与热降解反应产物进行了比较。结果表明,催化剂的存在能显著地降低聚苯乙烯的降解温度,催化剂的酸量和孔结构对聚苯乙烯的降解温度、活化能、积炭的生成量及裂解产物有很大的影响。     

用脉冲电旋风除尘器处理催化剂厂分子筛尾气

介绍了脉冲电旋风除尘器的工作原理及用其处理催化剂分子筛尾气的试验情况。试验结果表明,分子筛尾气很适合脉冲电旋风除尘处理,除尘效果较好,在进气含尘质量浓度为1324．9mg／m^3时,除尘效率达89．4％左右,粉尘驱进速度达0．15～0．17m／s,比常规电除尘技术提高1倍左右。     

芳香烃清洁硝化催化剂

综述了国内外有关芳香烃硝化过程中替代硫酸的催化剂的研究进展;介绍了沸石类催化剂、粘土类催化剂、离子交换树脂催化剂、固载化液体酸催化剂、金属氧化物及金属盐催化剂、杂多酸催化剂以及固体超强酸催化剂的合成及催化效率与优缺点.     

废铜催化剂的综合利用

研究了以湿法回收利用废铜催化剂中的铜、锌制取氧化亚铜和氧化锌的原理以及最佳工艺条件。该工艺可同槽进行浸取、蒸氨、还原、中和水解等操作,生产成本低,产品质量好,工艺过程中无三废排放,具有很好的综合效益。