The buffering effects of aquatic sediments against acidic deposition

ＴｈｅｂｕｆｆｅｒｉｎｇｅｆｆｅｃｔｓｏｆａｑｕａｔｉｃｓｅｄｉｍｅｎｔｓａｇａｉｎｓｔａｃｉｄｉｃｄｅｐｏｓｉｔｉｏｎＬｉａｏＢｏｈａｎ；ＴａｎｇＨｏｎｇｘｉａｏ（ＲｅｓｅａｒｅｈＣｅｎｔｅｒｆｏｒＥｃｏ－ＥｎｖｉｒｏｎｍｅｎｔａｌＳｃｉｅｎｃｅｓ...     

Spatial variations in daily average CO2 concentrations above wetland surface of Xianghai National Nature Reserve, China

Horizontal and vertical variations of daily average CO2 concentration above the wetland surface were studied in Xianghai National Nature Reserve of China in August, 2000. The primary purpose was to study spatial distribution characteristics of CO2 concentration on the four levels of height(0.1 m, 0.6 m, 1.2 m and 2 m) and compare the differences of CO2 concentration under different land covers. Results showed that daily average CO2 concentration above wetland surface in Xianghai National Natural Reserve was lower than that above other wetlands in northeast China as well as the worldwide average, suggesting that Xianghai wetland absorbed CO2 in August and acted as“sink” of CO2. The horizontal variations on the four levels of height along the latitude were distinct, and had the changing tendency of“decreasing after increasing” with the increase of height. The areas with obvious variations were consistent on different levels of height,and those with the highest variations appeared above surface of shore, sloping field, Typha wetland and Phragmites wetland; the vertical variations were greatly different, with the higher variations in Phragmites wetland and Typha wetland, and the lands near the shore and the sloping field with the lower variations. Spatial variations of daily average CO2 concentrations above wet!and surface were affected by surface qualities and land covers.     

序批式反应器的水力停留时间的理论探讨

根据液龄分布函数是二元函数的观点．推导出了当进、出水流量是时间的函数时，反应器的水力停留时间的通用积分式和离散式；然后得出了序批式反应器(SBR）的水力停留时间(HRT)具体表达式，并分析了用现有方法计算其水力停留时间所产生的误差．结果表明，最大相对误差rmax仅与充水比λ有关．且呈正相关关系．取典型值λ=0．4时，rmax高达25％。     

矩形截面毛坯挤压矩形工件的上限研究

应用上限法建立了由矩形毛坯正挤压矩形截面工件的等挤压比流动模型 ,推导出了三次多项式表示的流线方程 ,给出了变形区的动可容速度场、应变速率场及上限功率的表达式 ,获得了挤压力的上限数值解 ;分析了变形程度、工件截面形状等参数对挤压力的影响 ,并获得了相对挤压应力与截面形状系数之间的近似关系式。研究证明采用流线速度场进行上限分析比其他方法更符合实际情况 ,根据流线设计的凹模优于常规凹模 ,如平底模。     

基于环境的交通网络流分配模型

通过对车辆尾气排放的观察 ,建立了一个基于环境的固定需求用户均衡网络流分配模型。并用EXCEL求解了一具体算例。运用模型可以在满足交通需求的情况下 ,使车辆对环境的污染减少到最低限度     

受污染地表水体生物修复技术研究进展

主要介绍了受污染地表水体生物修复技术的类型及特点,综述了国内外关于受污染地表水体生物修复技术研究及应用的现状,并对生物修复技术的研究及应用进行了展望.     

煤中部分潜在毒害微量元素在表生条件下的化学活动性

利用连续化学浸取实验方法，对采自贵州省二叠经龙潭组的３２个煤样中的１０种潜在毒害微量元素化学的活动性进行了研究，结果表明：煤中Ｈｇ、Ａｓ、Ｓｅ、Ｃｄ等元素具有极强的化学活动性，其中平均８３．８％的Ｈｇ、９３．５％的Ａｓ、８０．３％的Ｓｅ．６３．３％的Ｃ在．１％的Ｃｕ的８６．８％的Ｐｂ可以被带出煤中而进入表生环境；煤中Ｚｎ的化学活动性次之，只有平均４６．６％的Ｚｎ可能迁移进行环境中；Ｔｌ、Ｃｒ、Ｎｉ     

电极流动分析仪的研制和应用

采用固定电极测试状态的方法，将流动技术引入到离子电极直接电位分析法中，设计并试制了电极流动分析仪。配用市售硝酸根电极、钠电极、氟电极、氯电极和氨电极进行了环境样品的测定。结果表明，电极流动分析仪法的分析速度比直接电位法提高２－３倍，变异系数，２．９％－５．０％之间，回收率在９０％－１０５％之间；直接电位法变异系数在２．３％－６．７％之间，加收率在９０％－１０９％之间。     

镀液循环流量对封闭循环电沉积Ni-SiC复合镀层的影响

目的 研究封闭式镀液循环装置中不同镀液循环流量对Ni-SiC复合镀层的影响规律,优化镀液循环流量参数.方法 以Q235管状工件为待镀基体,以添加SiC颗粒的改良瓦特镀液为母液,在自主研发的封闭式镀液循环电镀装置中以0.3、0.5、0.7 m3/h的镀液循环流量于管件内壁制备Ni-SiC复合镀层,通过SEM检测、XRD测试、硬度测试和摩擦磨损性能测试等手段,对各Ni-SiC复合镀层宏微观形貌、厚度、成分、结构、硬度和耐磨性进行分析研究.结果 在0.5 m3/h流量条件下,镀层厚度为32.98μm,SiC颗粒含量为15.37％,镀层晶粒尺寸和硬度分别为10.84 nm和704HK0.245,该条件下制备的Ni-SiC复合镀层具有最佳耐磨性,摩擦系数为0.41,体积磨损率仅2.83×10–5 mm3/Nm.结论 在不同镀液循环流量参数下,采用该封闭式循环电镀装置,均可制得均匀完整的Ni-SiC复合镀层.随镀液循环流量的升高,镀层厚度和SiC颗粒体积含量均降低,镀层颜色金属光泽增强,镀层晶粒尺寸先减小、后增大,镀层硬度则先升高、后降低.     

Heavy metal adsorption on the Le An River sediment —The adsorption model

In this study,the surface properties and adsorption properties of the Le An River sediment were modelled via surface complexation approach.The model parameters were determined based on the data of our potentiometric titration experiments and the metal adsorption experiments with the Le An River sediment samples.Consequently,the surface complexation models for the natural sediment,in our case the Le An River sediments,which can interpret the experimental data very well were successfully established.Three typical surface complexation models that is the constant capacitance model,the diffuse layer model and the triple layer model,were considered in this research.This work indicated that the consistency and the interdependency among model parameters together with the selection of the surface adsorbed species should be emphasized.