Optimization of biodiesel production from the waste cooking oil using response surface methodology

In this research, transesterification of the waste cooking oil has been studied. Response surface methodology (RSM) based on Box–Behnken design was used to investigate the effects of the main operating parameters, including the methanol to oil molar ratio, catalyst concentration, and reaction temperature, on the biodiesel yield. The results revealed that the catalyst concentration is the most important parameter. The maximum biodiesel yield under the optimized conditions was 99.38 wt.%. Thermogravimetric analysis (TGA) was used for the determination of biodiesel conversion and the results were compared with that of gas chromatography (GC) analysis, showing a very small difference. Furthermore, an empirical quadratic equation has been presented to show the relation between biodiesel conversion and product viscosity.     

Employees' surface acting in interactions with leaders and peers

Surface acting has been widely studied in organizational research owing to its impact on organizational behaviors and outcomes. Past research almost exclusively has focused on employees' interactions with external parties such as customers, clients, and patients. This study sought to extend this literature by examining the effects of employees' surface acting in interactions with parties internal to the organization (i.e., leaders and peers). Data were collected from 40 work groups (129 focal participants, 40 leaders, and 40 peers) from a large real estate agency company located in Beijing, China. Results showed that employees' surface acting influenced various emotional, relational, and behavioral outcomes. In addition, the present findings revealed that the consequences of employees' surface acting differed across leaders versus peers. Copyright © 2015 John Wiley & Sons, Ltd.     

石油类物质的湿沉降及其对区域水环境的影响:以正构烷烃为指示物

为评估含有机污染物的湿沉降对区域水环境污染的贡献,在广州市3个采样点(海珠区、天河区和萝岗区)采集了2010年湿沉降样品(157个),并在天河点采集了12个干沉降、11个地表径流及10个气溶胶样品,并对其中指示化合物正构烷烃的浓度、来源和通量进行分析.正构烷烃(包括从C20—C34的15种同系物)总浓度范围为0.6—292μg·L-1;从季节上看,其在雨季(4—9月)的浓度低于旱季(1—3月和10—12月).碳优势指数和主成分分析结果表明,广州市的正构烷烃主要来源于石油产品的消费(50%),暗示石油产品消耗是主要污染源;其次来自植物排放(38%).此外,广州市在2010年有55±80 t(平均值±标准偏差)正构烷烃经干沉降和湿沉降至地表,其中湿沉降的贡献为39±80 t.同时,大约有224±296 t正构烷烃通过地表径流进入到珠江,反映了面源污染对区域水环境影响很大.因此,控制石油产品的消费和治理地表径流,是抑制面源污染、改善区域水环境的两个途径.     

Two-year measurements of surface ozone at Dangxiong, a remote highland site in the Tibetan Plateau

Measurements of surface O3 and carbon monoxide(CO) were made from September 2009 to August 2011 at Dangxiong(30.48°N, 91.10°E, 4187 m a.s.l.), a remote highland site in a southern valley of the Nyainqêntanglha Mountains in the Tibetan Plateau, China. The monthly mean O3 mixing ratio ranged from 29.1 to 51.4 ppb, with an average of 38.5 ppb, and the maximum value was observed in May. The average diurnal cycle of O3 concentration showed a minimum in early morning and a maximum in the afternoon, with a broader "high platform" from the late morning to the late afternoon, and resembled that of surface wind speed. The concentration of surface O3 was highly significantly correlated with tropospheric column O3 over the regions surrounding Dangxiong and with that of surface O3 observed at a site north of the Nyainqêntanglha Mountains, suggesting a good regional representativeness of surface O3 at Dangxiong. In the afternoon when stronger winds blew, surface air showed distinct features of free-atmospheric air, with higher O3, lower CO, and lower relative humidity(RH). The negative O3–CO and O3–RH correlations in most months indicate a significant influence of air masses from the free troposphere. Trajectory analysis suggests that air masses originating from the south of the site make a negative net contribution to surface O3 and a positive contribution to CO and humidity, and those from the northwest sector contribute conversely to the respective quantities.     

Development and case study of a science-based software platform to support policy making on air quality

This article describes the development and implementations of a novel software platform that supports real-time, science-based policy making on air quality through a user-friendly interface. The software, RSM-VAT, uses a response surface modeling (RSM) methodology and serves as a visualization and analysis tool (VAT) for three-dimensional air quality data obtained by atmospheric models. The software features a number of powerful and intuitive data visualization functions for illustrating the complex nonlinear relationship between emission reductions and air quality benefits. The case study of contiguous U.S. demonstrates that the enhanced RSM-VAT is capable of reproducing the air quality model results with Normalized Mean Bias < 2% and assisting in air quality policy making in near real time.     

淀浦河近十年水质评价及变化趋势研究

针对区域地表水污染特征,采用综合污染指数法,评价了淀浦河中上游段2005年-2014年间水质达标情况,计算了主要污染物的污染负荷,运用季节性肯达尔趋势检验分析了淀浦河中上游段水质变化趋势.结果表明,近十年来淀浦河中上游段水质均未达到规划水质要求,但总体水质呈改善趋势,水质以轻度污染为主,各主要污染物中,氨氮的污染负荷最大,总磷次之,呈现以氨氮和总磷为主的富营养化污染特征,研究结果为淀浦河的水质改善和水环境的污染防治等工作提供了重要依据.     

Modeling and optimization of turning duplex stainless steels

The attractive combination of high mechanical strength, good corrosion resistance and relatively low cost has contributed to making duplex stainless steels (DSSs) one of the fastest growing groups of stainless steels. As the importance of DSSs is increasing, practical information about their successful machining is expected to be crucial. To address this industrial need, standard EN 1.4462 and super EN 1.4410 DSSs are machined under constant cutting speed multi-pass facing operations. A systematic approach which employs different modeling and optimization tools under a three phase investigation scheme has been adopted. In phase I, the effect of design variables such as cutting parameters, cutting fluids and axial length of cuts are investigated using the D-Optimal method. The mathematical models for performance characteristics such as; percentage increase in radial cutting force (%F_r), effective cutting power (P_e), maximum tool flank wear (VB_max) and chip volume ratio (R) are developed using response surface methodology (RSM). The adequacy of derived models for each cutting scenario is checked using analysis of variance (ANOVA). Parametric meta-heuristic optimization using Cuckoo search (CS) algorithm is then performed to determine the optimum design variable set for each performance. In the phase II, comprehensive experiment-based production cost and production rate models are developed. To overcome the conflict between the desire of minimizing the production cost and maximizing the production rate, compromise solutions are suggested using Technique for Order Preference by Similarity to Ideal Solution (TOPSIS). The alternatives are ranked according to their relative closeness to the ideal solution. In the phase III, expert systems based on fuzzy rule modeling approach are adopted to derive measures of machining operational sustainability called operational sustainability index (OSI). Artificial neural network (ANN) based models are developed to study the effect of design variables on computed OSIs. Cuckoo search neural network systems (CSNNS) are finally utilized to constrainedly optimize the cutting process per each cutting scenario. The most appropriate cutting setup to ensure successful turning of standard EN 1.4462 and super EN 1.4410 for each scenario is selected in accordance with conditions which give the maximum OSI.     

电子元器件表面化学防护效果的测定研究

目的研究电子元器件表面化学防护的方法。方法应用选择性涂覆设备进行研究并优化工艺条件,选择丙烯酸清漆和稀释剂的体积混合比例从1∶0.2到1∶1进行实验,在100 mm/s的喷涂速度下,喷涂印制板的过程在0.5 min内完成,喷涂的相对标准偏差不超过±0.005 mm。结果涂层厚度可控制在25~75μm的范围内,符合国际标准ICP-CC-830的要求,涂层具有较好的流平性,无气泡、针孔和絮状物,无雾化等。结论这种方法可以成功地应用于印制板上电子元器件表面的化学防护。该方法具有涂覆准确性高,有毒稀释剂消耗量低,涂覆效果好,经济环保等的特点。     

中国大气挥发性有机物控制现状及对策研究

大气挥发性有机物(VOCs)不仅本身具有较强毒性,而且是影响中国区域复合大气污染的重要前体物和参与物。近年来,中国不断加大对VOCs的管控力度,从制定政策体系、建立监测标准等角度采取了一系列的措施。但总体来看,中国大气VOCs控制仍存在许多问题。突出地体现在:基础数据匮乏,排放状况不清;法律法规滞后,污染防治与监管体系不健全;排放标准和监测规范不完善,控制技术亟需革新。基于此,本文从完善法律法规、健全制度体系和加强标准控制等方面提出了加强VOCs管控的思路和对策建议。     

中国地表水环境质量标准监测体系现状研究及完善建议

中国地表水环境质量标准监测体系历经30余年,已初步形成一套基本成熟的地表水环境质量监测体系,但随着环境保护工作的不断推进和监测技术的进步,监测体系的诸多问题也凸显.结合中国《地表水环境质量标准》（GB 3838-2002）,对中国地表水水质的监测方法、技术、指标等方面进行了系统的归纳与分析,提出了相应的建议,即规范项目参数的描述、筛选优化控制项目、建立多层次、实用的控制指标监测方法体系、完善控制项目QC指标体系、制订专门地表水监测技术规范.