土地利用/覆盖变化对长江上游非点源污染影响研究

在国内外相关研究的基础上,利用输出系数模型,结合RS和GIS技术,对长江上游的非点源污染负荷进行了空间模拟和负荷估算.模拟结果表明,在不考虑流域损失的前提下,由于土地利用造成的非点源污染负荷TN总量从20世纪70年代的123万t下降至2000年的116万t,基本呈逐年减少的趋势,由土地利用造成的TP的变化趋势与TN基本相同,从70年代的3.7万t下降到2000年的3.5万t左右.就省份、土地利用类型和水系而言,四川省、种植用地和草地以及金沙江水系和嘉陵江水系对长江上游的非点源污染贡献较大.在非点源污染负荷强度上,重庆市和嘉陵江水系单位面积负荷最高,是今后应重点治理的地区.结果表明,该模型可以对长江上游这样的超大尺度空间的非点源污染进行较好的空间模拟.     

植物修复--大面积低剂量放射性污染的新治理技术

放射性污染是当今难以治理的环境污染问题,对于大面积低剂量的放射性污染,植物修复是种较适用的新型治理技术.系统阐述了植物修复技术的概念与内容,对放射性污染植物修复技术研究现状与进展、植物修复的优缺点进行了重点评述,并对这技术在未来放射性污染治理中的应用与研究提出了建议.     

聚合氯化铝-腐殖酸(PACl-HA)絮体的物理与分形特征研究

采用低温急速冷冻-真空干燥技术制备了PACl-HA絮体的粉末样品,研究了这些样品的物理与分形特征.结果表明,PACl-HA絮体具有无定形结构,主要组成元素为C、O、Al,所含特征官能团保留了絮体组成原料的一些特征;絮体的BET比表面积为130～161 m²·g^-1,BJH累积吸附孔体积为0.38～0.52 cm³·g^-1,BJH脱附平均孔径为7.7～9.6nm,PSD峰值对应孔径8.4～11.2nm.PACl-HA絮体具有自相似性的粗糙表面,呈现多尺度分形特征;图象法和N₂吸附/脱附等温线法确定的表面分形维数Ds分别为2.03～2.26、2.24～2.37,前者的分形尺度大约处于23～390nm之间,主要属于絮体外表面尺度,而后者的分形特征尺度区间的下限大约为0.2nm,属于孔表面尺度;另外,对同一絮体,N₂吸附法和脱附法确定的孔表面分形维数不同.热力学模型计算出的D_s远大于3,与Sahouli等的研究不符.     

武汉汉阳地区城市集水区尺度降雨径流污染过程与排放特征

2005年4月至8月对武汉市汉阳地区十里铺集水区进行了8次径流污染过程的水量、水质研究.结果表明,城市集水区尺度径流污染过程是降雨径流对整个集水区地表、排水系统中累积污染物的冲刷、携带过程,受集水区累积污染物数量、污染物可冲刷性和降雨径流特征的共同影响.城市降雨径流中初期污染物浓度显著高于后期,污染物浓度的峰值提前于径流的峰值,具有明显的初期冲刷效应.8次监测结果的算术平均值,初期5 mm、10 mm和15 mm降雨径流中TSS的负荷分别占总负荷的48%、68%和78%.初期径流中TSS的负荷与晴天累积天数呈线性正相关关系.     

沸石在水污染控制中的研究与应用进展

综述了沸石在水污染控制领域的理论研究和应用的进展。     

生物材料治理镉污染研究进展

近年来,生物材料以其经济、有效和无二次污染等特点,在重金属废水处理和土壤修复方面显示出了众多的优势·可替代传统的镉污染处理方法.综述了目前国内外生物材料在处理镉污染方面的研究进展,并对今后应用生物材料治理镉污染提出了一些建议.     

铝件表面处理废水治理所得化学污泥的再生利用研究

对混凝法处理铝件表面处理废水治理所得化学污泥再生利用进行了研究,得到了适宜的操作条件.结果表明,用浓硫酸溶解污泥的最佳用量为0.14～0.16 mL/g湿污泥,湿污泥的溶解率可达90%,铝的溶出率也可达95%以上.把污泥的溶解液作混凝剂回用于印染废水的混凝处理也取得了良好的效果,其COD去除率≥80%,脱色率≥90%.实现了资源的二次利用,改善了作业环境,获得了较好的经济效益和社会效益.     

图象法确定底泥颗粒物的表面分形维数(Ds)

研究了不同标度下底泥颗粒物的表面分形特征.结果表明,底泥颗粒的表面在几个nm到几个μm之间一般都具有多重分形特征,而且在不同的标度范围内表面分形维数(Ds)具有一定的差异,在100-102量级之间,随图象分辨率的增大,相应的Ds一般呈变小的趋势.SEM图象计算出的Ds为2.32-2.42,AFM图象计算出的Ds为2.00-2.46,它们是是纯粹几何意义上的表面粗糙特征的描述.     

Integrated Risk Framework for Onsite Wastewater Treatment Systems

Onsite wastewater treatment systems (OWTS) are becoming increasingly important for the treatment and dispersal of effluent in new urbanised developments that are not serviced by centralised wastewater collection and treatment systems. However, the current standards and guidelines adopted by many local authorities for assessing suitable site and soil conditions for OWTS are increasingly coming under scrutiny due to the public health and environmental impacts caused by poorly performing systems, in particular septic tank-soil adsorption systems. In order to achieve sustainable onsite wastewater treatment with minimal impacts on the environment and public health, more appropriate means of assessment are required. This paper highlights an integrated risk based approach for assessing the inherent hazards associated with OWTS in order to manage and mitigate the environmental and public health risks inherent with onsite wastewater treatment. In developing a sound and cohesive integrated risk framework for OWTS, several key issues must be recognised. These include the inclusion of relevant stakeholders throughout framework development, the integration of scientific knowledge, data and analysis with risk assessment and management ideals, and identification of the appropriate performance goals for successful management and mitigation of associated risks. These issues were addressed in the development of the risk framework to provide a generic approach to assessing risk from OWTS. The utilisation of the developed risk framework for achieving more appropriate assessment and management techniques for OWTS is presented in a case study for the Gold Coast region, Queensland State, Australia.     

Effect of Cadmium on Microbial Activity and a Ryegrass Crop in Two Semiarid Soils

Soil pollution with Cd is an environmental problem common in the world, and it is necessary to establish what Cd concentrations in soil could be dangerous to its fertility from toxicity effects and the risk of transference of this element to plants and other organisms of the food chain. In this study, we assessed Cd toxicity on soil microorganisms and plants in two semiarid soils (uncultivated and cultivated). Soil ATP content, dehydrogenase activity, and plant growth were measured in the two soils spiked with concentrations ranging from 3 to 8000 mg Cd/kg soil and incubated for 3 h, 20 days, and 60 days. The Cd concentrations that produced 5%; 10%;, and 50%; inhibition of each of the two soil microbiological parameter studied (ecological dose, ED, values) were calculated using two different mathematical models. Also, the effect of Cd concentration on plant growth of ryegrass (Lolium perenne, L.) was studied in the two soils. The Cd ED values calculated for soil dehydrogenase activity and ATP content were higher in the agricultural soils than in the bare soil. For ATP inhibition, higher ED values were calculated than for dehydrogenase activity inhibition. The average yields of ryegrass were reduced from 5.03 to 3.56 g in abandoned soil and from 4.21 to 1.15 g in agricultural soil with increasing concentrations of Cd in the soil. Plant growth was totally inhibited in abandoned and agricultural soils at Cd concentrations above 2000 and 5000 mg/kg soil, respectively. There was a positive correlation between the concentration of Cd in the plants and the total or DTPA-extractable concentrations of Cd in the soil.