Efficient Delineation of Nested Depression Hierarchy in Digital Elevation Models for Hydrological Analysis Using Level‐Set Method

In terrain analysis and hydrological modeling, surface depressions (or sinks) in a digital elevation model (DEM) are commonly treated as artifacts and thus filled and removed to create a depressionless DEM. Various algorithms have been developed to identify and fill depressions in DEMs during the past decades. However, few studies have attempted to delineate and quantify the nested hierarchy of actual depressions, which can provide crucial information for characterizing surface hydrologic connectivity and simulating the fill‐merge‐spill hydrological process. In this paper, we present an innovative and efficient algorithm for delineating and quantifying nested depressions in DEMs using the level‐set method based on graph theory. The proposed level‐set method emulates water level decreasing from the spill point along the depression boundary to the lowest point at the bottom of a depression. By tracing the dynamic topological changes (i.e., depression splitting/merging) within a compound depression, the level‐set method can construct topological graphs and derive geometric properties of the nested depressions. The experimental results of two fine‐resolution Light Detection and Ranging‐derived DEMs show that the raster‐based level‐set algorithm is much more efficient (~150 times faster) than the vector‐based contour tree method. The proposed level‐set algorithm has great potential for being applied to large‐scale ecohydrological analysis and watershed modeling.     

Changes in Hydrology of the Ganges Delta of Bangladesh and Corresponding Impacts on Water Resources

The Ganges Delta in Bangladesh is an example of water‐related catastrophes in a major rural river basin where limitations in quantity, quality, and timing of available water are producing disastrous conditions. Water availability limitations are modifying the hydrologic characteristics especially when water allocation is controlled from the upstream Farakka Barrage. This study presents the changes and consequences in the hydrologic regime due to climate‐ and human‐induced stresses. Flow duration curves (FDCs), rainfall elasticity, and temperature sensitivity were used to assess the pre‐ and post‐barrage water flow patterns. Hydrologic and climate indices were computed to provide insight on hydro‐climatic variability and trend. Significant increases in temperature, evapotranspiration, hot days, heating, and cooling degree days indicate the region is heading toward a warmer climate. Moreover, increase in high‐intensity rainfall of short duration is making the region prone to extreme floods. FDCs depict a large reduction in river flows between pre‐ and post‐barrage periods, resulting in lower water storage capacity. The reduction in freshwater flow increased the extent and intensity of salinity intrusion. This freshwater scarcity is reducing livelihood options considerably and indirectly forcing population migration from the delta region. Understanding the causes and directions of hydrologic changes is essential to formulate improve water resources management in the region.     

呼和浩特市十年地表水环境质量趋势分析

本文根据呼和浩特市十年来河流水质监测数据,选取高锰酸盐指数(CODMn)、生化需氧量(BOD5)、氨氮、挥发酚、汞、铅和石油类七项指标,运用水质综合指数法(P法),分析呼和浩特市地表水十年来的变化趋势及污染特点,提出了治理地表水污染的思路。     

稀酸预处理铜藻制备生物乙醇工艺

选取暖温带海洋生态环境生物修复的首选物种——铜藻(Sargassum horneri)为原料进行生物乙醇的制备,以稀硫酸水解后的还原糖收率为响应值,考察水解温度、液固比、水解时间和w(H₂SO₄)等参数对水解效率的影响. 为优化稀酸水解铜藻预处理的工艺条件,在单因素试验的基础上,利用Box-Benhnken中心组合设计法和响应面分析法,建立稀酸预处理工艺参数的回归模型,并与酶水解及发酵相结合验证了铜藻稀酸预处理效果. 结果表明:①稀酸水解铜藻的最优工艺参数. 水解温度为120 ℃,液固比为20∶1,水解时间为2.00 h,w(H₂SO₄)为4.50%. ②稀酸水解铜藻过程中各影响因素之间存在交互作用,水解时间和w(H₂SO₄)的非线性作用显著. ③对经最佳稀酸预处理工艺处理后的铜藻粉进行酶水解,其还原糖收率为44.05%,是未预处理下的8.14倍,并且后续进行发酵后,乙醇产率达7.80%,是未预处理下的2.00倍. 表明铜藻是一种潜在的生物乙醇原料,稀酸预处理方法对铜藻生物乙醇的制备行之有效.      

The Surface Roughness of a Rubber Soling Material Determines the Coefficient of Friction on Water-Lubricated Surfaces

For more than a decade, evidence has been accumulating that points to the fact that the microscopic roughness of the footwear soling surface is a major determinant of slip-resistance on lubricated surfaces, but conclusive experimental proof has been lacking. This article describes an experiment in which five pairs of shoes were soled with the same rubber compound. Four of the pairs were abraded by different grades of grit to produce a range of roughness values. The coefficient of friction (CoF) of the five solings was then measured repeatedly by the walking traction method on wet surfaces including glazed wall tiles, vinyl asbestos coated with the wax floor polish, and both sides of a sheet of float glass. The Kruskal-Wallis statistical test proved beyond doubt that the soling roughness is a major factor in determining the CoF of this rubber soling material; p < 10⁻⁵. Nearly all of the grip was due to surface roughness of the soling material on these atypically smooth floors, although the surface roughness of the floors also had a significant effect on CoF; p < 0.003. Float glass is shown to be a promising reference floor material for the measurement of CoF of footwear; there was no statistical difference between results for the two sides of the glass sheet. Float glass could be used in the development of a standard CoF test method because new sheets of glass from the same manufacturer are identical and extremely smooth. The specification of CoF values for solings/floors combinations in lubricated conditions is of little value unless associated with roughness measurements and knowledge of how wear will affect the surface roughness of the sole. This article reports the first evidence that any specification of flooring by measuring CoF based on dry surfaces could lead to an increase in the number of injuries caused by slipping on the wet surfaces. Published by Elsevier Science Ltd     

中国船舶机舱火灾研究现状

分析了船舶机舱失火的原因和机舱火灾的特点 ,对我国船舶机舱火灾的研究现状进行了综述 ,对机舱火灾的研究前景进行了展望 ,提出了机舱火灾基础研究和应用研究面临的主要课题 ,表达了船舶机舱火灾研究的重要意义。     

极性基湿润剂与矿岩类粉尘颗粒的作用机理

根据矿岩类粉尘微颗粒的表面性质和极性基湿润剂的特性，应用分子热力学和表面物理化学理论探讨了湿润型抑尘剂与矿岩类粉尘之间的相互作用机理。矿岩类粉尘吸附水的本质是由于它们之间的相互吸引作用，是分子之间的短程相互作用力和长程作用力共同作用的结果。当矿岩类粉尘与水相碰撞时，只有当吸引力大于排斥力时，水分子才能牯附于矿岩类粉尘，表面张力和体系自由能足够小时，水才能湿润矿岩类粉尘。分析了湿润剂对水和矿岩类粉尘的表面改性的原理，它增加水和矿岩类粉尘之间的相互作用力，减小了界面表面张力和体系自由能，使矿岩粉尘被水湿润能自由地进行。     

船舶安全熵概念的提出及应用

船舶航行安全很大程度上取决于操作者对船舶航行过程中各种信息的把握,信息掌握的多少可作为衡量船舶安全的一个标准。把船舶航行链分为5种信息处理过程,利用信息熵的原理,提出船舶安全熵的概念,并建立了数学模型。根据船舶航行信息过程的具体因素,建立船舶航行安全评价指标体系;利用熵权法确定5种信息单元及其安全因素权重,对船舶航行的安全熵进行计算,可根据评价模型对船舶安全进行有效评价。利用渤海湾船舶M进行验证,其结果发现船员素质安全熵最大。船舶安全熵方法是对船舶安全评估的一种新探索。     

Environmental behaviors of phoxim with two formulations in bamboo forest under soil surface mulching

Phoxim (emulsifiable concentrate (EC) and granules (G)) has been widely used in bamboo forests. The persistence and magnitude of phoxim residues in the crop and soil must be investigated to ensure human and environmental safety. The environmental behaviors of the two formulations were investigated in a bamboo forest under soil surface mulching conditions (CP) and non-covered cultivation conditions (NCP). The half-lives of phoxim in soil under the two conditions in soil were 4.1–6.2 days (EC) and 31.5–49.5 days (G), respectively. Phoxim in EC could be leached from the topsoil into the subsoil. A minimized leaching effect was observed for G under NCP. Inversely, an enhanced leaching effect was observed for G under CP. The G formulation resulted in more parent compound (in bamboo shoots) and metabolite (in soil) residues of phoxim than in the case of EC, especially under CP conditions. In addition, the intensity and duration of the formulation effect on soil pH adjustment from G were more obvious than that from EC. Results showed that the environmental behaviors (distribution, degradation, residue) of phoxim in the bamboo forest were significantly influenced by the type of formulation. The prolongation effect from phoxim G might cause persistence and long-term environmental risk. However, bamboo shoot consumption could be considered relatively safe after applying the recommended dose of the two phoxim formulations.     

Does Including Soil Moisture Observations Improve Operational Streamflow Forecasts in Snow‐Dominated Watersheds?

Changing climate and growing water demand are increasing the need for robust streamflow forecasts. Historically, operational streamflow forecasts made by the Natural Resources Conservation Service have relied on precipitation and snow water equivalent observations from Snow Telemetry (SNOTEL) sites. We investigate whether also including SNOTEL soil moisture observations improve April‐July streamflow volume forecast accuracy at 0, 1, 2, and 3‐month lead times at 12 watersheds in Utah and California. We found statistically significant improvement in 0 and 3‐month lead time accuracy in 8 of 12 watersheds and 10 of 12 watersheds for 1 and 2‐month lead times. Surprisingly, these improvements were insensitive to soil moisture metrics derived from soil physical properties. Forecasts were made with volumetric water content (VWC) averaged from October 1 to the forecast date. By including VWC at the 0‐month lead time the forecasts explained 7.3% more variability and increased the streamflow volume accuracy by 8.4% on average compared to standard forecasts that already explained an average 77% of the variability. At 1 to 3‐month lead times, the inclusion of soil moisture explained 12.3‐26.3% more variability than the standard forecast on average. Our findings indicate including soil moisture observations increased statistical streamflow forecast accuracy and thus, could potentially improve water supply reliability in regions affected by changing snowpacks.