管道压力对天然气射流火热辐射灾害的影响

天然气管道时常受到破坏,并诱发巨大的射流火焰,可能引燃周围建构物体。系统地分析了管道压力对天然气射流火热辐射灾害的影响,以建立天然气射流火热辐射灾害的系统定量分析方法。基于压力管道小孔泄漏模型和权重-多点源热辐射计算模型,建立了目标物体最大入射热辐射通量、管道压力和目标物与泄漏小孔水平距离的定量关系式。进而选定10 k W/m~2和31.5 k W/m~2作为城镇建筑物遭受引燃和机械破坏的热辐射通量阈值,得到了不同管道压力下天然气射流火热辐射灾害范围。计算结果表明,GB 50028—2006《城镇燃气设计规范》依据管道压力所规定的燃气管道与建筑物的安全间距不能完全满足天然气管道破坏时射流火焰的安全要求,与某武汉天然气管道射流火事故后果一致。     

Getting From Here to Where? Flood Frequency Analysis and Climate1

Stedinger, Jery R. and Veronica W. Griffis, 2011. Getting From Here to Where? Flood Frequency Analysis and Climate. Journal of the American Water Resources Association (JAWRA) 47(3):506‐513. DOI: 10.1111/j.1752‐1688.2011.00545.x Abstract: Modeling variations in flood risk due to climate change and climate variability are a challenge to our profession. Flood‐risk computations by United States (U.S.) federal agencies follow guidelines in Bulletin 17 for which the latest update 17B was published in 1982. Efforts are underway to update that remarkable document. Additional guidance in the Bulletin as to how to address variation in flood risk over time would be welcome. Extensions of the log‐Pearson type 3 model to include changes in flood risk over time would be relatively easy mathematically. Here an example of the use of a sea surface temperature anomaly to anticipate changes in flood risk from year to year in the U.S. illustrates this opportunity. Efforts to project the trend in the Mississippi River flood series beg the question as to whether an observed trend will continue unabated, has reached its maximum, or is really nothing other than climate variability. We are challenged with the question raised by Milly and others: Is stationarity dead? Overall, we do not know the present flood risk at a site because of limited flood records. If we allow for historical climate variability and climate change, we know even less. But the issue is not whether stationarity is dead – the issue is how to use all the information available to reliably forecast flood risk in the future: “Where do we go from here?”     

ELISA AND GC/MS ANALYSIS OF PESTICIDE RESIDUES IN NORTH CAROLINA1

ABSTRACT: Studies were conducted to analyze the presence of 11 pesticide residues in 12 surface waters in the Piedmont and coastal plain regions of North Carolina. Samples were assayed using enzyme‐linked immunosorbent assays (ELISAs). All ELISA results of one part per billion (ppb, μg/L) or greater were confirmed using gas chromatography/mass spectrometry (GCIMS). ELISA detection limits were approximately an order of magnitude higher than GCJMS methods. Of the 5,035 analytical results from 742 surface water samples, atrazine was detected in approximately 45 percent of the samples, five of which were at or above the Maximum Contaminant Level (MCL) of 3‐ppb. Metolachlor was detected in 64 percent of the samples. Aldicarb, 2,4‐D, chlorpyrifos, and chlorothalonil were also detected, and each was found in less than 12 percent of the samples. The remaining pesticides, including carbaryl, acetochior, methomyl, carbofuran, and alachlor, were not detected during the study period.     

Ozone Dry Deposition Velocities for Coastal Waters

Air-sea exchange rates for ozone were measured by the eddy correlation technique at a site on the north Norfolk coast in the UK. The average surface resistance to ozone uptake was found to be, r_s(O₃) = 1,000 ± 100 s m^-1. Micrometeorological measurements of trace gas fluxes to ocean surfaces are rare but a review of available measurements suggests that we can constrain sea water surface resistance for ozone to between 1,000 (Regener (1974), and this work) and 1,890 s m^-1 (Lenschow et al., 1982), yielding surface deposition velocities between 0.53 and 1.0 mm s^-1. These values are more than an order of magnitude greater than can be explained by laboratory determined mass accommodation coefficients for ozone to water. The importance of dry deposition with respect to process air-sea exchange models is highlighted. A trend in surface deposition velocity with wind speed was also observed supporting a surface chemical enhancement mechanism of ozone uptake which in turn is enhanced by near surface mixing processes.     

Upper trapezius fatigue in carpet weaving: the impact of a repetitive task cycle

Introduction. Shoulder disorders are one of the most prevalent musculoskeletal disorders among carpet weavers. The most important cause of these disorders is muscle fatigue. The aim of the present study is to investigate the effect of carpet weaving characteristics on upper trapezius (UTr) muscle fatigue during a task cycle. Method. In this cross-sectional study, 9 women and 3 men participated. During an 80-min cycle of carpet weaving, a times-series model was applied to assess electromyography amplitude and frequency changes. Result. According to the joint analysis of electromyogram spectrum and amplitude method, the participants experienced 0% force decrease, 0.9% recovery, 18% force increase and 72% fatigue in the left UTr. Furthermore, the rates of force decrease, recovery, force increase and fatigue in the right UTr were 18%, 18%, 18% and 45%, respectively. Fatigue in the right and the left UTr was reported to be the dominant state during one carpet weaving task cycle. Conclusion. Task cycle appears to have a significant impact on UTr fatigue in participants, and UTr fatigue can be considered a serious risk factor in shoulder musculoskeletal disorders. Hence, further studies should focus on better workstations and work–rest periods during various subtasks.     

氚钛靶放射源在离子迁移气相色谱仪中的应用及其电离辐射环境影响分析

本文以成都科亿达自动化工程有限公司气象色谱实验室GC-2000离子迁移气相色谱仪为例,简要分析了氚钛靶放射源在气象色谱实验中的应用,并通过监测数据分析其电离辐射环境影响.     

Photochemical Behavior of Parathion in the Presence of Humic Acids from Different Origins

This paper reports the effect of ultraviolet radiation on the degradation of pesticide ethyl parathion in the presence of humic acids. Ethyl parathion was completely degraded in 300 min using an artificial lamp of 7.41 × 10^{? 10} einstein/s. Humic acid from peat did not influence the photochemical rate (k = 8.92 × 10^?3 min). However, in the presence of aquatic humic acid, the photochemical rate was higher (11.5 × 10^?3 min). The analytical determinations show the presence of p-nitrophenol and aminophenol in the reaction medium during the photochemical experiments. The kinetic of degradation in all experiments obeyed a first-order reaction pattern.     

PHB/V in Extrusion Coating of Paper and Paperboard: Part I: Study of Functional Properties

Extrusion-coating experiments were carried out in the pilot line at Tampere Univesity of Technology (Institute of Paper Converting). Typical paper and paperboard substrates were coated with commercially produced 3-hydroxybutyrate/3-hydroxyvalerate. The resulting physical properties of extrusion-coated composite structures were studied. Adhesion between PHB/V and a fiber-based substrate was rather poor, regardless of typically used pretreatments (corona and flame). On the other hand, adhesion was sufficient (mode of failure was fiber tear as the materials were separated) when the substrate was primed with an acrylic-based primer. The surface energy and polarity of PHB/V were much higher than the respective ones of LDPE. Curling of PHB/V was reduced by the addition of wax or tall oil rosin into the base polymer.     

钢线拉丝及表面处理生产线成套装备

主要论述了一种钢线拉丝及表面处理生产线成套装备的设计。该生产线的生产方式是多根钢线在牵引动力系统的作用下依次穿过各种处理设备,完成各道工序,实现钢线完成表面处理的目的。这个生产过程中,钢线可以完成放线、脱脂、退火、镀镍、造膜、烘干及收线一体化的工序。采用立体式布置,空间利用更为合理。