Determining residential firewood consumption

Household firewood use has become increasingly popular in the United States over the past few years. Significant problems remain in estimating firewood consumption. Methods of determining the amount of wood consumed vary from state to state. Units used for measuring firewood vary, but the cord remains the researcher's favorite. Factors used for converting other units, such as pickup truck loads to cords also vary. People who do not use firewood are less likely to respond to mailed surveys, resulting in potential overestimates of statewide consumption. This paper identifies some problems associated with estimating household firewood consumption and recommends methods of dealing with them.     

地下油料储存库火灾初期模式与安全性研究

使用模拟的地下油料储存库装置,对地下油料储存库火灾初期模式进行了实验研究.结合油料地下储存库火灾防治和安全性要求对实验结果进行了分析.结果表明,模拟油料地下储存库起火后,火灾初期模式与实验初始条件、边界条件和装置结构直接相关.在一定条件下,模拟油料地下储存库内出现爆燃向爆轰的转变;不同的环境条件下,火灾的模式不同;油料地下储存库内火灾的发展,油料的持续燃烧及发生燃烧的部位受通气条件和洞内复杂的烟气流向等条件控制.     

A SIMPLE HYDRAULIC SIMULATOR1

ABSTRACT: A simple simulator was constructed, calibrated, programmed and used in management studies of a hydraulic system containing two pumping stations in series, connected by canals and reservoirs. The features of the model, its calibration and use are described, and comparisons between measured and computed hydraulic behavior are presented.     

双室微生物燃料电池处含银废水的产电性研究

以剩余污泥为阳极底,糖蜜废水为基质,Ag Cl废水为阴极电子受体,构建了双室微生物燃料电池(Two-chamber Microbial Fuel Cell,简称MFCs),并研究了电池的产电特性、库仑效率及金属去除率.结果表明:Ag+不仅可以作为阴极电子受体,而且还能稳定产电,外电阻为1000Ω时,获得的最大电压为514.5 m V,最大功率密度为65.82 m W·m-2.在阴极实现了对废水中Ag+的去除,最大去除率可达71.6%,而且Ag+浓度为2000 mg·L-1时,回收金属银单质质量为197.66 g.在阳极对废水的处理效果也很显著,库仑效率最高为2.66%,COD去除率最大为81.22%.     

电活性生物膜阳极构建及其对2，4，6-三氯酚同步降解和产电

为实现氯酚（CPs）的高效降解和资源化利用,探究微生物燃料电池（MFC）体系优势功能菌,揭示生物降解路径.接种、驯化长春市南郊污水处理厂的厌氧活性污泥,获得生物膜阳极以构筑MFC-2,4,6-TCP体系,基于扫描电子电镜（SEM）、16S rRNA分析测序方法,考察生物膜阳极微生物的附着情况和优势菌种,基于电化学阻抗（EIS）、循环伏安（CV）和线性扫描伏安（LSV）等电化学分析手段,表征生物阳极的电化学性能和氧化还原能力.结果表明,生物膜阳极微生物种类丰富,其中Geobacter和Acinetobacter分别为MFC-2,4,6-TCP体系产电和降解驯化期的优势功能菌,体系最大输出电压可达0.55 V,最大功率密度为428.65 mW·m-2,对2,4,6-TCP的降解和矿化率可达97.5%和85.4%.随着MFC循环次数的增加,微生物代谢途径多样化,产电菌逐渐演替为协同菌,且优势功能菌对2,4,6-TCP降解的中间产物（环己醇）,其毒性远低于氯酚或苯酚,更利于被微生物利用.该结果可为氯酚废水的实际处理提供新策略和技术参考.     

我国燃油税改革效应模拟分析

经历了十几年的讨论,燃油税改革方案终于在2009年出台并实施,改革后燃油税究竟会对我国宏观经济及各部门产生怎样的影响,倍受关注.基于此背景,采用环境CGE模型对改革前后的两种不同燃油税税率进行了量化分析,总体研究得出：从长期发展来看,燃油税改革有利于我国经济结构调整,减少能源消耗和降低碳排放;短期内会增加企业生产成本,抑制宏观经济增长,其中交通运输业和石油加工业受到的冲击最大,应引起有关部门重视.     

铁氮掺杂碳纳米管/纤维复合物制备及其催化氧还原的效果

阴极催化剂是影响微生物燃料电池(microbial fuel cell,MFC)性能的关键因素.通过研究制备成本低廉、氧还原反应(ORR)催化活性高的阴极催化剂来替代Pt/C对于实现MFC规模化应用具有重大意义.研究采用化学气相沉淀法,以三聚氰胺作为碳氮前驱物、以黑珍珠2000或乙炔炭黑作为碳源,外加醋酸亚铁作为铁前驱物,合成了两种铁氮掺杂碳纳米管/纤维复合物(FeNCB和FeNCC),作为MFC的阴极催化剂.通过循环伏安法和旋转圆盘-环电极分析FeNCB、FeNCC和Pt/C的ORR催化活性的差异,并用MFC验证其差异.结果表明,FeNCB性能与Pt/C相当,优于FeNCC,其催化路径是通过4电子途径催化氧还原反应;MFC-FeNCB性能略优于MFC-Pt/C,显著优于MFC-FeNCB有助于MFC的扩大化,其最大功率密度为1 212.8mW·m~(-2),开路电压为0.875 V,电池稳定电压为(0.500±0.025)V.用X射线衍射、X射线光电子光谱、拉曼光谱等进一步分析显示,复合物中碳纳米管管径的大小、铁氮掺杂的类型和含量以及氧含量是引起制备的复合物催化氧还原性能差异的原因所在.     

不同工况下轻型车油耗试验驾驶方式评价

在一台性能稳定的汽油车上由同一驾驶人员按平顺、粗暴和正常3种驾驶方式分别进行NEDC （新欧洲行驶工况）、FTP75（美国认证工况）以及WLTC （世界统一轻型车测试循环）工况油耗试验,采用能量变化率（ER）、距离变化率（DR）、能量经济性变化率（EER）、绝对速度改变率（ASCR）、速度平方根误差（RMSSE）以及惯性做功改变率（IWR）6个指标作为驾驶质量评价指标,通过分析计算每次试验各项评价指标及其与燃料消耗量变化的相关性,确定了油耗试验驾驶方式的合理性边界条件.结果表明,对于WLTC和FTP75工况,平顺驾驶和粗暴驾驶均会导致评价指标变大或者变小,驾驶方式与评价指标呈规律性变化;对于NEDC工况,不同的驾驶方式对NEDC工况油耗影响较小.油耗试验的边界条件,WLTC工况的EER为（0.25±0.47）%、ASCR为（1.20±0.97）%、RMSSE为（0.85+0.15）km/h、IWR为（2.15±1.27）%时,可认为油耗试验的驾驶方式较为合理;FTP75工况的EER为（-0.09±0.69）%、ASCR为（-0.59±0.42）%、RMSSE为（0.88+0.34）km/h以及IWR为（-0.69±1.66）%时,油耗试验的驾驶方式较为合理.     

Application of interface material and effects of oxygen gradient on the performance of single-chamber sediment microbial fuel cells (SSMFCs)

Single-chamber sediment microbial fuel cells(SSMFCs) have received considerable attention nowadays because of their unique dual-functionality of power generation and enhancement of wastewater treatment performance. Thus, scaling up or upgrading SSMFCs for enhanced and efficient performance is a highly crucial task. Therefore, in order to achieve this goal, an innovative physical technique of using interface layers with four different pore sizes embedded in the middle of SSMFCs was utilized in this study.Experimental results showed that the performance of SSMFCs employing an interface layer was improved regardless of the pore size of the interface material, compared to those without such layers. The use of an interface layer resulted in a positive and significant effect on the performance of SSMFCs because of the effective prevention of oxygen diffusion from the cathode to the anode. Nevertheless, when a smaller pore size interface was utilized, better power performance and COD degradation were observed. A maximum power density of 0.032 mW/m~2 and COD degradation of 47.3% were obtained in the case of an interface pore size of 0.28 μm. The findings in this study are of significance to promote the future practical application of SSMFCs in wastewater treatment plants.     

Emission of intermediate volatility organic compounds from a ship main engine burning heavy fuel oil

Intermediate volatility organic compounds (IVOCs) are crucial precursors of secondary organic aerosol (SOA). In this study, gaseous IVOCs emitted from a ship main engine burning heavy fuel oil (HFO) were investigated on a test bench, which could simulate the real-world operations and emissions of ocean-going ships. The chemical compositions, emission factors (EFs) and volatility distributions of IVOC emissions were investigated. The results showed that the main engine burning HFO emitted a large amount of IVOCs, with average IVOC EFs of 20.2–201?mg/kg-fuel. The IVOCs were mainly comprised of unspeciated compounds. The chemical compositions of exhaust IVOCs were different from that of HFO fuel, especially for polycyclic aromatic compounds and alkylcyclohexanes. The volatility distributions of IVOCs were also different between HFO exhausts and HFO fuel. The distinctions in IVOC emission characteristics between HFO exhausts and HFO fuel should be considered when assessing the IVOC emission and related SOA formation potentials from ocean-going ships burning HFO, especially when using fuel-surrogate models.