Environmental forensic investigation of the air pollution from a cement manufacturing unit

Abstract

Cement manufacturing is a process that results in the emission of significant quantities of suspended particulate matter (SPM) to the ambient air. An environmental forensic investigation was carried out in the surroundings of a major cement manufacturing unit at a place called Coimbatore in the southern Indian state of Tamil Nadu. The investigation was carried out to identify the contribution of the cement manufacturing unit to the SPM concentration of the surrounding air environment. The sampling points’ selection and sample collection were done following the principles outlined in the INTERPOL Manual for Pollution Crime Forensic Investigation. On-site monitoring of the air samples was carried out using Mini Laser Aerosol Spectrometer (GRIMM, Mini-LAS Model 11R). The instrument was capable of measuring particles ranging from 0.25 to 32 µm and classifying them into 31 size channels. The test results at majority of the monitoring locations were well above the limits specified in the National Ambient Air Quality Standards of India. Microscopic studies of the dust samples were carried out for surface texture and particle shape. The spatial distribution of particles was analysed using geographic information system (GIS) for the visual identification of the extent of the pollution by keeping the cement factory as the focal point. The results from the GIS and microscopic analysis established the role of the cement factory in the particulate matter pollution of its surroundings, specifically in the areas North-West of the factory. The successfully adopted procedure can serve as a guideline for the environmental forensic investigation of similar pollution incidences.     

硝化悬浮填料塔中氨氧化细菌群落稳定性特征分析

利用PCR-DGGE分析技术,对于化学生物絮凝处理工艺中悬浮填料塔的氨氧化细菌(AOB)群落进行了研究。主要考察了曝气强度和水力停留时间2个运行参数调整的情况下,系统AOB群落结构的变化。生物膜样品直接取自硝化填料塔,多维尺度(MDS)方法用于DGGE电泳图谱的分析,分析结果以二维图形向量的方式显示,结果表明,曝气强度和水力停留时间均对AOB群落有一定的影响,主要的AOB种类在运行过程中基本不变,系统对于运行条件具有良好的稳定性。     

河口近岸水体中颗粒态重金属的潮周期变化

对长江口崇明东滩近岸水体中颗粒态重金属的潮周期变化特征及其影响机制进行了研究.结果表明,受粒度影响,底层水体中颗粒态Cu、Pb、Fe、Mn、Zn、Cr、Al的总量分别高出表层沉积物的184%、99%、56%、62%、147%、50%和45%,其中Cu、Pb、Fe、Mn、Zn、Al可还原态部分在底层水体悬浮颗粒物中的含量也明显高出表层沉积物的2～3倍,但与重金属总量相比,上述元素的可还原态部分所占比例与表层沉积物相差不大.在5次潮汐循环过程中,颗粒态重金属均在涨潮初期、高平潮前后及落潮末期出现较高含量.这种变化主要与水动力条件有关,当水体流速增大时,从底部沉积物再悬浮起来的颗粒态重金属对水体中的永久性悬浮颗粒起了很大的稀释效应.水体中的盐度、DO及pH等环境因子对潮周期内颗粒态重金属的变化影响不大.     

悬浮填料活性污泥法优化填料投配比试验

悬浮填料活性污泥法中试试验系统,利用某城市污水厂生产工艺回流污泥为系统悬浮污泥,探讨了悬浮填料投配比、投配方式和中试硝化效果之间的关系。试验结果表明,悬浮填料最小投配比为15%即可满足系统硝化功能的要求;悬浮填料的投配方式宜采用集中投配并布置于曝气池的末端,这样既可提高系统的生物膜量,又有利于硝化反应的实现。而且,控制适当的溶解氧浓度,悬浮填料的投加有助于同步硝化反硝化更充分的进行。     

全白土催化剂生产废水的处理

用4种无机絮凝剂和3种有机絮凝剂进行了脱除全白土催化剂生产废水（简称废水）中固体悬浮物（SS）的实验研究。实验结果表明：在废水pH6．8条件下,无机絮凝剂和有机絮凝剂脱除废水中SS的效果均较差,用无机絮凝剂时的SS去除率低于26％,用有机絮凝剂时的SS去除率低于18％;废水pH对SS去除率的影响较大,当调节废水pH为8．0时,无机絮凝剂中硫酸铝脱除废水中的SS效果最好,在硫酸铝加入量为0．02mg／L、沉降时间为2h的最佳操作条件下,SS的去除率可达93％。     

碳责任账户的目标原则、分配逻辑与框架构建：账户建立

随着全球环境问题日趋严重,企业和消费者日益认识到减缓气候变化的紧迫性。作为经济活动的主要参与者,减少温室气体排放已经成为任何单个企业及其供应链的巨大挑战。供应链的所有参与者都需要为气候减缓做出努力。现有的碳排放责任核算大多从企业的生产方面入手。最终消费者作为供应链的重要参与者,是所有生产者的最终服务对象,同样具有不可忽视的碳减排作用以及应承担的碳减排责任。本文提出以产品为导向,考虑产品生产过程中的直接碳排放和间接碳排放,建立产品碳排放基准值,对基于供应链的所有参与主体进行责任分配,进而建立基于供应链的碳责任账户。本文构建的责任体系框架具有更广泛、更有前景的应用潜力。     

The impact of government subsidy and tax policy on the competitive decision-making of remanufacturing supply chains

In this paper, we consider a two-period competition model of a remanufacturing supply chain consisting of three members: a new product manufacturer, a recycler and a remanufacturer. The manufacturer supplies new products in the first period and the remanufacturer participates in the competition in the second period. We consider three scenarios in the second period: (1) there is no government subsidy in the competition; (2) there is only government subsidy in the competition; (3) there are both government subsidy and tax in the competition. First, we give the optimal decision-making of the manufacturer, the remanufacturer and the government in the three scenarios; second, we analyse changes in the decision-making of the manufacturer and remanufacturer in the three scenarios and compare their results. We analyse the effects of government subsidy and tax and their asymmetric use on manufacturers’ and remanufacturers’ decision-making variables and competitive performance. We also take consumer awareness of environmental protection into account and examine its impact on subjects’ decisions. Lastly, we operate a numerical example to show the results.     

FCR多级接触氧化系统处理乳品工业废水的研究

为提高乳品工业废水生物处理的去污脱氮能力,以新型螺旋状纤维填料作为载体,采用多级氧化槽内不同种类微生物形成的食物链系统（food chain reactor）,详细考察了不同水力停留时间COD、TN、NH^＋₄-N、TP等的去除率及其去除机理,并对污泥减量化效果进行了初步探讨.结果表明,当进水COD为842～1 843 　mg/L、TN为36.3～92.2 　mg/L、NH^＋₄-N为30.1～52.1 　mg/L,HRT=6　h时,系统COD的平均去除率达到93.3%;TN和NH⁺₄-N的去除效果显著,其平均去除率分别达到73.3%和80.7%,出水COD、TN、NH⁺₄-N平均值分别为79.4　mg/L、9.6 　mg/L、6.1　mg/L,均低于《污水综合排放标准》（GB 8978-2002）的一级标准.该系统不仅具有较高的去污脱氮效果,而且产生的剩余污泥量极少,其污泥产率的平均值为7.7%.该系统运行费用低,操作管理方便,长期运行稳定,可应用于城市污水、中高浓度有机废水（如餐厅污水、食品工业废水）等的处理.     

循环经济理论思索

循环经济是对近现代人类社会长期、大规模、高强度、未善待大自然的开发活动导致自然资源和生态环境逼近其耐受极限而进行反思的产物.从经济-社会-科技-自然多元复合人工自组织系统角度,研究了循环经济的科学内涵,指出循环经济是建立在组织结构协同基础上的物质循环与能量梯级利用,是集约经济的高级形态和理想模式.针对循环经济包含的若干属性特征,论述了5个基本理论问题,包括守恒与平衡、循环与协调、互动整合与倍增效应、聚集经济与产业集群、生态学基本原理应用和生态系统服务.并就生态工业系统规划设计涉及的基本方法、关键环节、人力投入等给出了政策建议.      

逆转录-聚合酶链反应(RT-PCR)技术同时检测水中多种肠道病毒

建立了一种利用通用引物RT-PCR技术检测水中肠道病毒的方法.利用脊髓灰质炎病毒1～3型,柯萨奇病毒B3型作为参考病毒株,根据肠道病毒RNA5′非编码区中具有高度同源性的序列来设计通用引物.比较了M-MLV酶和AMV酶的逆转录效果,AMV酶能够成功地从地表水和生活污水中逆转录病毒RNA,更适于实际应用.对比研究了PCR过程中的退火温度,c(Mg2＋)等因素对RT-PCR检测结果的影响,选择退火温度55　℃,c(Mg2＋)为2　mmol/L的反应条件,优化了RT-PCR检测方法.通过检测水样中接种的连续稀释的病毒,确定了该检测方法的灵敏度为38　CCID₅₀.考察人工污染的地表水、污水、二级处理出水样品发现,检测灵敏度基本一致.该方法可应用在实际环境的肠道病毒检测中.