Combustion characteristics of Malaysian municipal solid waste and predictions of air flow in a rotary kiln incinerator

Malaysia is in dire need of alternatives to landfilling for solid waste management. Recently, landfills have faced the problems of overfilling, overflowing of leachates leading to pollution of water resources, and uncontrolled dust emissions adversely affecting the local environment. With the rising cost of urbanization coupled with the high rate of waste generation, one possible method of waste treatment that is receiving particular attention by the government is incineration. Incineration of solid waste is rather new in Malaysia, with limited usage in handling small sources of waste generation such as the municipal solid waste (MSW) of resort islands; however, its potential in ameliorating the problems associated with solid waste treatment may make it an attractive alternative to landfill. This article presents the results of test runs conducted to investigate the performance of a locally designed and manufactured rotary kiln incinerator (RKI). The test runs were conducted using MSW collected from the Shah Alam municipality. The combustion efficiency was analyzed by looking at the temperature profiles and chemical species concentrations. To complement the combustion characteristics measurements, predictions of the air flow in the incinerator during the process were also investigated. The overall performance of the RKI suggests that it is suitable for treating MSW.     

Experimental Study of the Criteria of Flow Laminarization in Two-Dimensional Dense Gas Plumes

Laminarization of flow in a two-dimensional dense gas plume was experimentally investigated in this study. The plume was created by releasing CO₂ through a ground-level line source into a simulated turbulent boundary layer over an aerodynamically rough surface in a meteorological wind tunnel. The bulk Richardson number (Ri_*), based on negative plume buoyancy, plume thickness, and friction velocity, was varied over a wide range so that the effects of stable stratification on plume laminarization could be observed. A variety of ambient wind speeds as well as three different sizes of roughness arrays were used so that possible effects of roughness Reynolds number (Re_*) on plume laminarization could also be identified. Both flow visualization methods and quantitative measurements of velocity and intermittency of turbulence were used to provide quantitative assessments of plume laminarization.Flow visualization provided an overall picture of how the plume was affected by the negative buoyancy. With increasing Ri_*, both the plume depth and the vertical mixing were significantly suppressed, while upstream propagation of the plume from the source was enhanced. The most important feature of the flow revealed by visualization was the laminarization of flow in the lower part of the plume, which appeared to be closely related to both Ri_* and Re_*.Measurements within the simulated dense gas plumes revealed the influence of the stable stratification on mean velocity and turbulence intensity profiles. Both the mean velocity and turbulence intensity were significantly reduced near the surface; and these reductions systematically depended on Ri_*. The roughness Reynolds number also had considerable influence on the mean flow and turbulence structure of the dense gas plumes.An intermittency analysis technique was developed and applied to the digitized instantaneous velocity signals. It not only confirmed the general flow picture within the dense plume indicated by the flow visualization, but also clearly demonstrated the changes of flow regime with variations in Ri_* and Re_*. Most importantly, based on this intermittency analysis, simple criteria for characterizing different flow regimes are formulated; these may be useful in predicting when plume laminarization might occur.     

Identifying the largest individual sample value from a two-way composite sampling design

Composite sampling techniques for identifying the largest individual sample value seem to be cost effective when the composite samples are internally homogeneous. However, since it is not always possible to form homogeneous composite samples, these methods can lead to higher costs than expected. In this paper we propose a two-way composite sampling design as a way to improve on the cost effectiveness of the methods available to identify the largest individual sample value.     

利用餐饮业废油脂制造生物柴油

世界的石油产量将会逐渐减少,石化柴油燃烧后所排放的废气是造成的城市空气污染的主要原因,生物柴油是石化柴油很好的替代能源,文章介绍了国外废油脂处理利用和甸餐饮业废油脂的概况,提出了利用餐饮业废油脂制造生物柴油的方法和工艺流程,并讨论了利用餐饮业废油脂制造生物柴油的几个问题。     

模拟降雨径流作用下红壤坡面侵蚀水动力学机制

土壤侵蚀过程受控于侵蚀外营力和土壤抗侵蚀性能,深入理解坡面流水动力学特性及其侵蚀动力是研究土壤侵蚀动力学机制的基础。利用可变坡土槽,通过不同雨强(60、90和120 mm/h)和径流冲刷(10、15和20 L/min)组合模拟试验,研究了第四纪黏土红壤坡面水流的水动力学特征参数及其与土壤侵蚀量间的关系。结果显示:降雨和径流冲刷影响了坡面产流产沙过程和坡面流水力学特性,其中平均流速v、平均水深h、雷诺数Re和水流功率ω均随降雨强度和上方来水流量的增加而增大,相对水深曼宁糙率n/h则减小,其水力学他参数(弗如德数Fr、阻力系数f和水流剪切力τ)变化规律不明显。坡面水流平均速度取值范围为0.21~0.45 m/s,平均水深取值范围为5.6~9.4 mm,在试验条件下红壤坡面侵蚀水流流态大部分均处于"紊流-急流区"。不论从径流角度看或是从泥沙角度分析,由相对水深和曼宁糙率系数两种水动力因子共同组成的复合水动力特征参数-相对水深曼宁糙率,是表征不同上方来水流量和降雨强度条件下第四纪粘土红壤坡面侵蚀特征的水动力参数。     

长三角城市群“空间流”网络结构特征——基于公路运输、火车客运及百度指数的综合分析

信息技术的应用与社会信息技术的传输,使大量的要素(人流、物流、信息流)在城市群空间内集聚与扩散,加密城市群空间内城市联系。在基于公路运输、普通列车、高速列车以及百度指数4个要素的综合分析基础上,对长三角城市群"空间流"网络结构特征进行探析。研究结果表明:(1)长三角城市群区域内城市联系虽具备了网络化规模,但城市间的联系不均衡,以上海、南京、杭州等城市为多中心的协调网络发展格局特征明显;(2)长三角城市群16个核心城市"空间流"特征呈现三角形网络结构,其三角形的顶角分别由上海(沪)、南京(宁)与杭州(杭)3个核心节点城市构成。在空间结构内部,形成若干次级城市网络连线;在空间分布上,北翼网络化程度较高于南翼线性联系程度,区域联系强度以"沪—宁"、"沪—杭"沿线向两侧递减;(3)上海、南京、杭州、苏州、无锡5个核心城市排名处于网络中心的前列,扬州、南通、泰州、舟山等周边城市相对靠后,这与区域经济发展过程的"吸虹效应"有关,随着区域经济一体化程度的加深,中心城市会向周边地区提供服务与经济辐射,完善整个长三角城市群网络体系。     

Environmental assessment of garden waste management in the Municipality of Aarhus, Denmark

An environmental assessment of six scenarios for handling of garden waste in the Municipality of Aarhus (Denmark) was performed from a life cycle perspective by means of the LCA-model EASEWASTE. In the first (baseline) scenario, the current garden waste management system based on windrow composting was assessed, while in the other five scenarios alternative solutions including incineration and home composting of fractions of the garden waste were evaluated. The environmental profile (normalised to Person Equivalent, PE) of the current garden waste management in Aarhus is in the order of −6 to 8 mPE Mg⁻¹ ww for the non-toxic categories and up to 100 mPE Mg⁻¹ ww for the toxic categories. The potential impacts on non-toxic categories are much smaller than what is found for other fractions of municipal solid waste. Incineration (up to 35% of the garden waste) and home composting (up to 18% of the garden waste) seem from an environmental point of view suitable for diverting waste away from the composting facility in order to increase its capacity. In particular the incineration of woody parts of the garden waste improved the environmental profile of the garden waste management significantly.     

固定化斜生栅藻净化畜禽废水中氨氮和磷的影响因素

为探讨Cu2+、p H和流速对固定化斜生栅藻去除畜禽废水中NH+4-N、TP效果的影响,在实验室条件下模拟实际污水处理过程,并采用正交实验方案对结果进行分析。结果表明低质量浓度Cu2+(0~0.05 mg/L)改善藻的净化效果,高质量浓度Cu2+(0.50~5.00 mg/L)抑制藻的净化效果;在p H较高的条件下(p H=9),固定化斜生栅藻的净化效果明显提高;流速对结果没有明显影响。通过正交实验,得出固定化斜生栅藻去除畜禽废水中NH+4-N、TP的优化条件如下:Cu2+质量浓度为0.05 mg/L,p H为9,流速为0.3 m/s。此时NH+4-N去除率为96.11%,TP去除率为97.53%。     

Effects of degree of water saturation on dispersivity and immobile water in sandy soil columns

Three natural nonaggregated soil samples, with similar grain-size distributions, have been used to determine the dispersive behavior of porous media under steady, saturated and unsaturated flow conditions. Tritium was used as a tracer and was found to have no sorption on the solid matrix. Generated breakthrough curves (BTCs) for the unsaturated experiments were symmetrical with no evidence of tailing. The unsaturated experiments for two of the soils were adequately described by considering all the water in the pore volume as mobile. However, about 10% of the pore water, independent of the degree of saturation, was found to be immobile in the case of the third soil during unsaturated flow. For this soil, there was no mass transfer between the two water regions, indicating that the immobile water is essentially isolated from the flowing water fraction. For all three soils, dispersivity under unsaturated conditions was found to be higher, independent of the degree of water saturation, than the value determined for the saturated experiments. This is inconsistent with what would be expected from the simple bundle-of-capillary-tubes model and does not agree well with a more sophisticated conceptualization of the porous medium. The data, however, clearly indicate a wider range in pore-water velocities when these soils are desaturated.     

3种不同基质潜流湿地对磷的去除效果

基质是潜流式人工湿地污水处理系统的重要组成部分，直接影响到系统的处理效果。本文研究了由沸石、页岩陶粒和碎石3种不同基质构建的潜流式人工湿地对磷的去除效果。结果表明，在设计水力停留时间3d，连续进出水情况下，碎石单元对磷的去除效果最好，页岩陶粒单元次之，沸石单元效果最差，平均去除率分别为95％、60％和35％。在潜流式人工湿地污水处理系统运行初期观察到磷释放现象，沸石单元最为明显。进水磷浓度较低时，磷的去除率随浓度升高而升高，当正磷、总磷浓度分别升高到2．4—2．5和3．1～3．3mg／L时，正磷、总磷的去除率开始迅速下降。