纳米涂层/铝合金在不同pH值的海水溶液中的腐蚀行为研究

目的评价纳米涂层/铝合金在不同pH值海水溶液中的腐蚀行为。方法通过测试纳米涂层/铝合金试样在不同pH值海水溶液中的EIS值,分析试样阻抗谱图及Bode谱图的演化规律,建立不同EIS图谱的不同电极阻抗模型,并采用ZView软件解析涂层体系不同时期的电化学阻抗谱,获得涂层电阻的变化趋势,及不同pH值海水浸泡的纳米涂层体系腐蚀失效速度。结果随着浸泡时间的增加及pH值的降低,纳米涂层/铝合金体系腐蚀损伤失效速率在浸泡前期整体趋势增大,但中后期由于腐蚀产物逐渐堵塞了涂层的微孔,腐蚀介质向铝合金表面渗透的速率逐渐减小。结论 pH为2.0海水浸泡下的3涂层失效最快,其次是pH为4.0海水浸泡下的2涂层,最后为p H为6.0海水浸泡下的1涂层,该涂层体系应采用等效电路模型C进行拟合。     

Risk-Based Prioritization of Air Pollution Monitoring Using Fuzzy Synthetic Evaluation Technique

Air pollution monitoring programs aim to monitor pollutants and their probable adverse effects at various locations over concerned area. Either sensitivity of receptors/location or concentration of pollutants is used for prioritizing the monitoring locations. The exposure-based approach prioritizes the monitoring locations based on population density and/or location sensitivity. The hazard-based approach prioritizes the monitoring locations using intensity (concentrations) of air pollutants at various locations. Exposure and hazard-based approaches focus on frequency (probability of occurrence) and potential hazard (consequence of damage), respectively. Adverse effects should be measured only if receptors are exposed to these air pollutants. The existing methods of monitoring location prioritization do not consider both factors (hazard and exposure) at a time. Towards this, a risk-based approach has been proposed which combines both factors: exposure frequency (probability of occurrence/exposure) and potential hazard (consequence).This paper discusses the use of fuzzy synthetic evaluation technique in risk computation and prioritization of air pollution monitoring locations. To demonstrate the application, common air pollutants like CO, NO_x, PM₁₀ and SO_x are used as hazard parameters. Fuzzy evaluation matrices for hazard parameters are established for different locations in the area. Similarly, fuzzy evaluation matrices for exposure parameters: population density, location and population sensitivity are also developed. Subsequently, fuzzy risk is determined at these locations using fuzzy compositional rules. Finally, these locations are prioritized based on defuzzified risk (crisp value of risk, defined as risk score) and the five most important monitoring locations are identified (out of 35 potential locations). These locations differ from the existing monitoring locations.     

Monitoring of Seasonal Vegetables for Pesticide Residues

Market samples (60) of six seasonal vegetables were monitoredduring 1996–1997 to determine the magnitude of pesticidalcontamination. The estimation of insecticide residuesrepresenting four major chemical groups i.e. organochlorine,organophosphorous, synthetic pyrethroid and carbamate, was doneby adopting a multiresidue analytical technique employingGC-ECD and GC-NPD systems with capillary columns. The testedsamples showed 100% contamination with low but measurableamounts of residues. Among the four chemical groups, theorganophosphates were dominant followed by organochlorines,synthetic pyrethroids and carbamates. About 23% of the samplesshowed contamination with organophosphorous compounds abovetheir respective MRL values. More extensive studies coveringdifferent regions of Haryana state are suggested to get a clearidea of the magnitude of vegetable contamination with pesticideresidues.     

森林合理年伐量分析确定方法研究

森林合理年伐分析确定是年森林采伐限额编制的关键技术之一,也是森林经理学的重要内容之一。本文从森林永续利用理论出发,以消长比度、成熟林采伐度、龄级结构改善度、流量均衡度、需要满足度５个指标建立了分析确定的综合评价模型,提出了森林合理年伐量分析确定的精确化方法,从而有效地保证了结果的科学性和准确性。     

甲硫醚废气制取二甲基亚砜技术研究

选择双氧水作氧化剂，将具有恶臭气味的涕灭威生产的副产物甲硫醚氧化成无臭的二甲基亚砜。通过实验，优化了工艺条件，减少了安全隐患，提高了二甲基亚砜的产率，消除了恶臭污染。     

混凝研究中的界面过程化学:IPF-颗粒物-水溶液的相互作用

仅以IPF 颗粒物 水溶液的相互作用为例 ,对混凝研究中二界面过程化学领域的进展加以介绍 .研究结果表明 ,经过预制的聚合铝在混凝过程中表现出较好的形态稳定性 ,而传统混凝剂则强烈地受溶液化学过程 ,尤其是溶液pH值的影响 .混凝剂水解聚合形态倾向于在颗粒物表面吸附沉积 ,而直接引发混凝作用 .单体形态则通过转化为聚合、沉淀形态起混凝作用     

脲酶抑制法检测环境样品中重金属离子研究

为探索利用脲酶快速检测环境样品中重金属离子的最佳条件，系统研究了重金属和缓冲液类型及其浓度对脲酶抑制率的影响。结果表明，不同浓度缓冲液中重金属离子浓度与脲酶抑制率呈显著的相关性，表现为随着重金属离子浓度的增加，脲酶抑制率也提高。缓冲液类型和浓度均能影响重金属对脲酶的抑制作用，其中磷酸缓冲液中，无论是Hg^2 还是Cu^2 对脲酶活性均有较强的抑制作用：在柠檬酸缓冲液中2种离子对脲酶的抑制作用存在显著差异。建立脲酶抑制检测技术的关键是选择合适的缓冲系统。此结果为脲酶抑制法在快速检测重金属离子中最佳检测条件的选择提供了理论依据。     

合成氨装置重点部位的安全管理及防范措施

对安庆分公司化肥厂合成氨装置 4年以来的运行及安全管理情况作了综述 . 对装置的重点 监督部位加强技术型管理 , 并实行了一系列行之有效的安全防范措施 , 使之达到了国内同类 型装置先进水平 .     

高浓度甲基橙溶液的低压湿式催化氧化处理

以高浓度甲基橙溶液模拟偶氮染料废水,采用低压湿式催化氧化法(LPWCO)进行处理,考察了H2O2投量、温度、FeSO4投量、硫酸浓度、甲基橙浓度等因素对甲基橙脱色率的影响。结果表明,LPWCO法能有效地使高浓度(大于400mg/L)甲基橙溶液脱色,脱色率大于95%,而H2O2投量不到Fenton法的5%。     

废渣──Al(OH)_3凝胶再利用研究

研究了对处理铝材加工含Al3＋的酸性废液过程中产生的二次污染物Al（OH）3凝胶废渣的应用。含水分约90％、80％左右的Al（OH）3凝胶200g分别与14～16mL、22～24mL95％的工业浓硫酸酸反应，可制得浓度为20％～23％的Al（SO4）3溶液，经稀释可用作造纸原料。