活性炭对两种生物染料脱色效果的实验研究

以颗粒状活性炭为吸附载体,对两种单体生物染料进行脱色吸附实验研究。通过实验确定出最佳优化条件：活性炭用量80g/L,溶液pH值约为5、5,溶液最佳温度为35℃,搅拌速度为150rpm／min,此时染料脱色率可达98％以上;在几种条件实验过程中,将两种染料进行对比发现：红色染料脱色率一般都比绿色染料脱色率高,而且前者一般比后者反应较敏感。同时,从活性炭的表面结构方面探讨吸附脱色机理,为活性炭深度处理印染废水的研究可提供一定的科学依据。     

废旧电路板的解离特性分析

废旧电路板的回收方法依赖于电路板的性质,因此从定性和定量的角度确定废旧电路板上各种物质的组成和含量,对处理技术的选择非常重要。本论文主要针对目前数量最多的废旧电路板（PCB）,利用选矿技术的分离方法进行废旧电路板的解离特性研究。即破碎后的物料首先通过筛分试验确定物料的粒级组成;通过小浮沉试验确定每个粒级的金属和非金属含量。为后续分选作业的可行性提供依据。     

利用化学沉淀法降低焦化废水氨氮浓度的预处理工艺研究

为了有效净化高浓度氨氮工业废水,采用向废水中投加MgCl2·6H2O和Na3PO4·12H2O生成磷酸氨镁沉淀的方法,以去除其中的高浓度氨氮。结果表明,在pH值为9.0,Mg^2＋、NH4^＋、PO4^3-的摩尔比为1.2：1：0.9,反应温度为25℃,反应时间为20 min,沉淀时间为50 min的条件下,氨氮质量浓度可由3 100 mg/l降低到56mg/l,去除率达到98%以上,为后续生化处理创造了条件。     

浅析中国的电子垃圾治理

本文分析了电子垃圾的成分、特征、危害以及中国电子垃圾现状,并在借鉴国外先进经验的基础上,进一步探讨了中国电子垃圾污染现状的原因和如何规范并合理地处理和回收电子垃圾,通过从法律、市场、企业和政府等多方面分析,提出了防治电子垃圾污染的建议和措施,同时呼吁社会各界共同关注电子垃圾对我们生存环境的影响,提高资源化废弃物和循环经济理念,提高全社会的环境保护意识,鼓励公众参与,这对促进中国经济的可持续发展和构建和谐社会具有重大意义。     

废弃采石场作为一般工业固体废物填埋场址探析

从城市工业固体废物消纳和废弃采石场作为填埋处置场地的角度出发,对利用废弃采石场作为第Ⅰ类一般工业固体废物填埋场场址条件进行探讨,通过广州市地区实例说明利用废弃采石场选址作为第Ⅰ类一般工业固废填埋场址的可用性,这对未来废弃采石场的综合利用具有一定的借鉴意义。     

Role of rural solid waste management in non-point source pollution control of Dianchi Lake catchments, China

In recent years, with control of the main municipal and industrial point pollution sources and implementation of cleaning for some inner pollution sources in the water body, the discharge of point source pollution decreased gradually, while non-point source pollution has become increasingly distressing in Dianchi Lake catchments. As one of the major targets in non-point source pollution control, an integrated solid waste controlling strategy combined with a technological solution and management system was proposed and implemented based on the waste disposal situation and characteristics of rural solid waste in the demonstration area. As the key technology in rural solid waste treatment, both centralized plant-scale composting and a dispersed farmer-operated waste treating system showed promise in rendering timely benefits in efficiency, large handling capacity, high quality of the end product, as well as good economic return. Problems encountered during multi-substrates co-composting such as pathogens, high moisture content, asynchronism in the decomposition of different substrates, and low quality of the end product can all be tackled. 92.5% of solid waste was collected in the demonstration area, while the treating and recycling ratio reached 87.9%, which prevented 32.2 t nitrogen and 3.9 t phosphorus per year from entering the water body of Dianchi Lake after implementation of the project.     

我国城市垃圾现状与可持续发展研究

首先分析我国城市垃圾问题的现状,介绍了我国目前城市垃圾处理技术,并对城市可持续发展垃圾治理问题进行了探讨。     

中小城市生活垃圾处理方法研讨

根据对城市生活垃圾不同的处理方法,并结合城市生活垃圾的成分,提出了中小城市应按其实际情况采用适宣本地的生活垃圾无害化处理的相应方法。     

A new approach to assessment and management of the impact from medical liquid radioactive waste

The Swedish regulations concerning disposal of clinical radioactive waste are currently under revision and a graded approach is proposed for risk limitation purposes. To assist the revision procedures, a screening study was performed to estimate public exposures from liquid releases from hospitals to public sewers. The results showed that doses to sewage workers were above the dose constraint of 100muSva(-1) especially for (131)I and (99m)Tc. Hence, a dynamic model, LUCIA, was developed for realistic assessments in which radionuclide transportation in sewers was modelled. Probabilistic simulations were performed to obtain probability distributions of radionuclide concentrations in sludge. Concurrently, estimates of the effective doses to sewage workers decreased significantly and were below 10muSva(-1) except for (111)In and (131)I. However, the Kd-coefficients representing the partition of radioactivity between water and sludge in sewers are highly uncertain for (111)In. As shown by sensitivity studies, these values are the major determinant of the exposures in sewers.     

Current Status of Manufacturing Hazardous Waste in Shanghai

Abstract

It is difficult to manage the manufacturing hazardous waste (MHW) which is generated from a huge amount of complicated sources and causes very serious pollution. Therefore more and more attention has been paid to MHW pollution. Shanghai, as an industrial and economic center and an international metropolis in China, has a vast industrial system spanning a multitude of sectors, which generates MHW not only in a huge magnitude but also in a large variety of types from complicated sources, resulting in severe pollution. In 2003, the production of MHW in Shanghai is about 3.96 × 10⁵ ton, involving 33 indices. Most of MHW in Shanghai is treated and disposed of, but a significant portion is not handled properly and effectively. This paper carries out in-field investigation on the current status of MHW production and treatment in Shanghai, and puts forward scientific proposals that Shanghai should facilitate cleaner production and minimize hazardous waste; strictly enforce hazardous waste registration system, strengthen monitoring the certified enterprises; strengthen intent disposal center construction and realize hazardous waste reclamation; accelerate establishing the technical criteria and the management policy, promote the research and development on the treatment and disposal technology, and strengthen information management, thus realizing integrated management on MHW pollution.