南亚热带森林3层次物种多度之广义泊松分布模型

生物群落中物种多度分布(species abundance distribution)呈典型的倒J形,即其中存在许多稀有种、少量常见种.物种多度分布模型研究有助于解决森林生态恢复中的物种配置等实际问题.本研究考察了一种过分散(over-dispersion,或称超分布,即方差大于均值)的离散型分布,即具有λ和α两个参数...     

不同目标导向性规划环境影响评价方法浅析

规划环境影响评价是环境影响评价在规划层次的应用,是对规划或计划及其替代方案的环境影响进行规范、系统、综合的评价过程.就政策导向性和项目导向性规划,从规划环评的方法与程序方面进行了比较、分析,并结合嘉兴滨海新区和巢湖皖维化工基地两个规划环评实例进行了案例研究.     

Critical review for the quantification of leachate production: Evaluation example for the “Oum Azza” public landfill in Rabat city,Morocco

The estimation of leachate quantities produced in landfills is necessary to dimension the treatment plants allowing to reduce the polluting load of these effluents and consequently avoid their negative impacts on the environment. Different leachate quantification methods were used in this study to assess the leachate volume produced at the Oum Azza landfill. The water balance method give comparable estimations of leachate production to the Ouled Berjal landfill ratio. The first method showed average values between 487 and 495 m³/day for 2015, 2018, and 2019, and at the same time, the second method gave values between 470 and 477 m³/day for the same years. In contrast, the World Bank ratio showed high values that vary between 2260 and 2295 m³/day for 2015, 2018, and 2019. The on-site data and the statistical analysis showed us that the World Bank ratio is not adapted for the estimation of the leachates produced in Oum Azza landfill, while the water balance and the ratio of Ouled Berjal landfill allowed to give comparable results to reality.     

甘氨酸厂氨氮废水治理的工艺及实验研究

运用多效真空蒸发兼热泵技术回收甘氨酸厂高氨氮废水中的氯化铵,通过实验找到了治理此废水的最佳真空度,克服了采用常规蒸发方法的能耗大、料液对设备腐蚀性强的缺点。最后运用吹脱法对蒸发冷凝水进行了治理,通过实验得到了吹脱的最佳工艺参数吹脱时间6h、pH125、吹脱温度60℃,为运用生化法彻底解决甘氨酸厂高氨氮工业废水的污染难题奠定了基础。     

再生水消毒副产物的检测、生成与控制

在水资源紧缺的当下,污水再生利用是一项重要的环保战略更是资源战略.消毒能有效杀灭病菌和阻断介水疾病的传播,是保障再生水用水安全的重要手段.然而,消毒剂会不可避免地与水中有机物发生反应形成具有毒害效应的消毒副产物.围绕污水在再生消毒过程中所产生的消毒副产物,针对其检测识别方法、生成条件（前体物、消毒工艺及水质条件对消毒副产物生成的影响）以及控制方法（源头控制、过程控制及末端控制）进行综述.在此基础上,对再生水消毒副产物的未来研究动态进行了探讨,可为保障再生水的安全利用提供依据.     

结构抗震控制的动态仿真分析方法研究

介绍了结构抗震控制的仿真分析方法:将设置阻尼器的结构看作一受控系统,运用状态空间方法描述受控结构的运动微分方程,采用MATLAB中的SIMULINK工具箱进行动态仿真,得到整个受控结构在地震作用下的动态反应。文末给出了仿真分析算例,其分析结果表明采用SIMULINK能够有效、准确地分析设置非线性阻尼器的结构在地震作用下的动力响应。     

亚硝酸型反硝化除磷工艺特性及其应用

以亚硝酸盐作为电子受体进行反硝化除磷污泥的驯化,并探究了工艺运行条件、性能及实际应用情况.研究表明:厌氧-缺氧-好氧驯化方式可快速富集以亚硝酸盐为电子受体的反硝化聚磷菌,通过逐步提高底物浓度可以驯化富集耐受高NO₂^--N浓度的DNPAOs.实际废水运行实验表明,反硝化除磷法处理猪场废水UASB-SFSBR尾水是可行的,当缺氧进水NO₃^--N、NO₂^--N和PO₄^3--P浓度分别为5,70,30mg/L时,出水NO₃^--N和NO₂^--N浓度基本为0,PO₄^3--P浓度在1.0mg/L以下.     

基于功效系数法的特种设备宏观安全风险评价模型

为掌握特种设备的整体风险水平,明确监管方向和重心,基于幂函数型功效系数法,建立特种设备的宏观安全风险评价模型。应用模型研究全国特种设备的宏观风险,然后将其作为基准衡量北京地区电梯的风险水平。结果表明:应用特种设备宏观安全风险评价模型,可计算分析特种设备的整体风险,实现不同种类设备风险的横向对比;将气瓶的宏观风险作为风险的标准当量,可实现国家、地区、企业同类设备风险的纵向对比,有助于促进政府和企业的监管决策工作。     

基于包扎法的石化乙烯装置挥发性有机物排放特征

装置泄露是石油炼化生产过程中重要的挥发性有机物(VOCs)无组织排放源.基于动态吹扫包扎法采样和预浓缩­­-GC/MS分析方法,对我国南方某石化企业乙烯生产过程中裂解装置的压缩、分离系统及芳烃抽提装置的泄漏组件进行了VOCs排放特征研究.结果表明:烷烃(49.7%~82.4%)含量最高,其次是烯烃(3.2%~35.7%)和芳香烃(5.5%~14.4%); 2-甲基戊烷、甲基环己烷、3-甲基己烷及2,3-二甲基丁烷在整个乙烯生产中都有重要比重.乙烯和反-2-丁烯是裂解装置的重要标志,而苯和甲苯是芳烃抽提装置的重要标志;臭氧生成潜势主要来自于烯烃,尤其是乙烯的贡献率最大,占总烯烃贡献的47.0%~73.0%.参考美国环保局推荐的Method-21,计算了轻液介质阀门的排放速率,获得其泄露排放速率与泄露浓度之间的定量关系为y=3×10^-7x^0.993(R²=0.788).     

Criteria and indicators for a bioenergy production industry identified via stakeholder participation

As bioenergy production expands and new bioenergy-based technologies emerge, there is a growing concern regarding the sustainability of their ecological and socioeconomic impacts. Comprehensive sustainability assessments are needed to address this concern and to assure that the development of the bioenergy industry meets sustainability goals. Most sustainability assessments for bioenergy are expert-driven, broad, and largely motivated by an interest in optimizing international trade in bioenergy. As a result, social and cultural sustainability targets are vague or underdeveloped. In this study, we developed a sustainability assessment for a regional bioenergy production industry in Upper Michigan, using stakeholder participation. Semi-structured interviews and focus group meetings were used to elicit participants’ concerns and opinion. These concerns were translated into sustainability Criteria and Indicators (C&Is), many of which could be supported with available science. Some of the C&Is identified by participants were unique to the region. Sustainability C&Is were broadly categorized into economic (C = 5; I = 22), environmental (C = 6; I = 12), social (C = 3; I = 9), policy and regulations (C = 3; I = 13), and institutional capacity (C = 4; I = 13). While participants could identify indicators for most of the criteria (many of which are also supported by existing literature), further research and validation will be necessary to identify measurable, practical, and bias-free indicators for all criteria.