甲磺酸帕珠沙星中甲烷磺酸的离子色谱法测定

建立了甲磺酸帕珠沙星中甲烷磺酸的离子色谱分析方法.选用亲水性的阴离子交换柱IonPac ASl8作分析柱,在线淋洗液发生器产生的KOH为淋洗液,等度淋洗,电导检测,在10min内完成甲烷磺酸分析.结果表明,在0.7-140mg·l-1范围内线性良好(r2=0.9998),样品峰面积的RSD为0.494%(n=7),回收率为107.2%.方法简便、快速、基体干扰小,可在甲磺酸帕珠沙星产品的检验中发挥重要作用.     

In-situ electrochemical measurements of total concentration and speciation of heavy metals in acid mine drainage (AMD): assessment of the use of anodic stripping voltammetry

We assessed the use of anodic stripping voltammetry (ASV) for in-situ determinations of both total concentration and speciation of dissolved heavy metals (Cd, Cu, Pb and Zn) in acid mine drainage (AMD). In the Kwangyang Au–Ag mine area of South Korea, different sites with varying water chemistry within an AMD were studied with a field portable anodic stripping voltammeter. Anodic stripping voltammetry after wet oxidation (acidification) was very sensitive enough to determine total concentration of dissolved Cd because Cd was dominantly present as ‘labile’ species, whilst the technique was not so effective for determining total Cu especially in the downstream sites from the retention pond, due to its complexation with organic matter. For dissolved Pb, the concentrations determined by ASV after wet oxidation generally agreed with those by ICP-AES. In the downstream samples (pH>5), however, ASV data after wet oxidation were lower than ICP-AES data because a significant fraction of dissolved Pb was present in those samples as ‘inert’ species associated with colloidal iron oxide particles. The determination of total dissolved Zn by ASV after wet oxidation appeared to be unsatisfactory for the samples with high Cu content, possibly due to the interference by the formation of Zn–Cu intermetallic compounds on the mercury coated electrode. In AMD samples with high dissolved iron, use of ultraviolet irradiation was not effective for determining total concentrations because humate destruction by UV irradiation possibly resulted in the removal of a part of dissolved heavy metals from waters through the precipitation of iron hydroxides.     

采油作业“三废”控制技术研究与应用

针对采油作业产生的废酸、固废、废水处理成本高、技术不成熟等问题,研发改性废酸降压增注、深部调剖技术;高比重污泥悬浮研磨后的固废处理技术;低耗水打塞、原井液+CaCl2压井、原井液处理再利用技术,减少了"三废"的产生,解决了"三废"环保处理费高等问题,消除了环保隐患,实现了清洁生产,环境效益显著。     

工作场所空气中硫酸雾（SO3）的分析

采用碘量法测定工作场所空气中的三氧化硫及硫酸雾，三氧化硫及硫酸雾经中性水吸收后与碘化钾和碘酸钾反应，析出的碘与淀粉指示剂作用产生蓝色，进行比色测定。     

天青石及锶矿中硫酸锶的测定

通过实验，解决了测定天青石中硫酸锶时的不足，结果令人满意。     

酸雨研究的现状和发展趋势

介绍了酸雨的起因和目前国内外开展的 1 1个研究领域 ,叙述了各个领域的研究现状和发展趋势 ,指出要解决酸雨问题 ,应通过对酸性污染物的排放、迁移扩散、转化、沉降、对水及陆地生态系统的影响等基础研究和信息 ,制定出控制污染源的排放、节能及生态恢复对策     

TiO_2光催化对微滤去除腐殖酸的膜污染控制研究

着重研究了不同紫外灯光源和照射时间条件下,TiO_2光催化(PCO)对微滤去除腐殖酸过程中的膜污染控制,并探讨了膜污染的控制机理。研究结果表明,TiO_2光催化能有效提高微滤对腐殖酸的去除,同时降低膜通量的下降,起到有效控制膜污染的作用。进一步的实验分析表明,TiO_2光催化控制膜污染的主要机理在于将腐殖酸降解为易于被TiO_2吸附的小分子量物质,吸附腐殖酸降解产物后的TiO_2聚合颗粒粒径增大,易于在膜表面形成更为松散的沉积层,并使膜污染从以膜孔堵塞和沉积层污染为主转化为以沉积层污染为主的可逆性污染。     

不同碳源和泥龄对反硝化聚磷的影响

在4个SBR装置(1#~4#)中,对4种不同比例的丙酸/乙酸合成废水采用厌氧/缺氧方式驯化富集反硝化聚磷菌(DPB),研究了碳源浓度和污泥龄对除磷的影响。实验结果表明:(1)厌氧段碳源COD浓度越高,释磷越充分,溶解性正磷酸盐(SOP)去除率越高;但当碳源COD浓度超过某个浓度值时,未反应完全的有机物残留于后续缺氧段对缺氧吸磷产生抑制作用。(2)污泥龄SRT=15 d时,活性污泥的性能较好,达到了较好的除磷效果。(3)在相同碳源浓度和相同的污泥龄下,随着丙酸/乙酸比例的提高,SOP的去除率逐渐的降低。说明在厌氧/缺氧环境下,碳源中丙酸比例的提高不利于系统中磷的去除。高乙酸含量的碳源更适合反硝化除磷系统。     

酸雨对建筑材料的影响及防治研究综述

综合分析了酸雨对建筑外墙的涂料、石材、混凝土等主要建筑构件的腐蚀原理,并提出了防治措施,来预防酸雨对建筑材料的侵害。     

组合工艺处理填埋场渗滤液中溶解性有机污染物的去除特性

以采用"SBR+混凝+Fenton氧化+BAF"组合工艺处理的晚期垃圾渗滤液各级出水为研究对象,考察了HA、FA和HyI等溶解性有机物(DOM s)在各个工艺处理过程中的变化。结果表明,组合工艺COD和NH3-N去除率分别达到98.4%和99.3%;对DOM s的去除率为98.3%,其中胡敏酸(HA)、富里酸(FA)和亲水性有机物(HyI)的去除率分别为98.3%、99.5%和95.7%。各处理工艺中SBR和混凝工艺对HA和HyI的去除贡献较大,Fenton氧化工艺对FA去除率较高。Fenton氧化和BAF联用,可以有效去除难降解的溶解性有机污染物,使出水达到《生活垃圾填埋污染控制标准》(GB16889-2008)排放标准。